What should I do if I want to insulate a timber roof?

The five-storey roof insulation layer, lawn, ceramsite insulation, honeycomb mat, and rubber mat all play a role in preventing roof leakage, and the dew and rainwater stored on the lawn also play a role in indoor cooling. In this way: not only the roof terrace is beautified, but also the green from a distance, and the method of adding insulation layer and suspended ceiling on the roof can only delay the rate of indoor heating after exposure to the sun.

In summer, from morning to night, the insulation layer actually becomes a heat storage layer, and the accumulated heat will still be released into the room. The same is true for suspended ceilings, where the heat isolated from the ceiling will still be dissipated into the room.

Whether it is a sunny house or a normal form of housing, when decorating, it is easier to add a few more windows. For example, open the skylight on the ceiling, add a few floor-to-ceiling windows around the sky, and when it is hot, it is a good way to open the windows for ventilation. The third is to plant rattan plants on the roof.

Like grapes, beans, loofahs, ** boxes and poles of plants for sale, the disadvantage is to have time management, and finally the shade net ** is about 8 yuan a catty. The disadvantage is that I am afraid of strong winds, and I can't use it for three yearsLaying insulation boards:

Directly on the roof of the floor slab to lay thermal insulation board, ordinary foam board, better with extruded plastic board, thickness of about 4-8 cm according to the local weather conditions to choose the appropriate insulation board, insulation board thickness thick, high density, good insulation effect. In order to avoid the stilt insulation bricks affecting the appearance of the roof and the activities of the crowd, and avoid the construction cost of the awning and affecting the lighting, you can lay a layer of insulation materials on the roof, and you can also use the principle of air insulation. This method is generally to use foam material to insulate the heat, <>

Based on my own experience in rural housing construction and the architectural knowledge I know, I consider the following, if the roof is a flat roof, the most popular and simple method is to paint the roof several times with thermal insulation and waterproof paint after the flat roof is slopedThere is also a simpler one, that is, directly with a shade net on the roof of the bungalow, such an effect can also be used. It's just that this one needs to be bought, and the straw curtains in our hometown can be made by ourselves.

To increase thermal insulation materials, it is necessary to choose good thermal insulation effect, glass wool rock wool effect is general, phenolic foam, polyurethane foam board can be selected, and the thermal conductivity is relatively low.

We can lay insulation on the roof of the building, the sunlight shines directly on the insulation, the rising temperature can be carried away by the air between the roof and the insulation, and we can also build an awning, or green insulation, you can plant some vegetables and fruits in the home to insulation.

Apply an insulating layer to the top of the house and then apply tin foil to prevent overheating and burning.

You can put a layer of insulation on the roof to not only insulate the heat, but also to prevent water. The overall effect is very good.

A layer of thermal insulation film should be added when decorating, so that it can have a thermal insulation effect, and the effect is also obvious.

Insulation should be laid, and there are a lot of good insulation materials on the market that can make the house cool.

If you want to insulate a wooden roof, you can add a few more windows when decorating, which is a relatively easy method. For example, opening a skylight on the ceiling, adding a few floor-to-ceiling windows around it, and often opening the windows to blow wind when the weather is hot is a good cooling method. The second is to plant vines on the roof.

Just like grapes, soybeans, and loofahs, they can be decorated with boxes or shelves.

First of all, you can use a shade net to lay on the roof of the bungalow. This effect is also good. You can also use the way of laying insulation board, the roof ground is directly paved with insulation board, ordinary foam board, a better extruded board, the thickness is about 4 8 cm, according to the local weather conditions to choose the appropriate insulation board, the thickness of the insulation board is thick, the density is high, and the insulation effect is good.

In order to avoid the stilt insulation bricks affecting the appearance of the roof and crowd activities, and not affecting the construction cost and lighting of the awning, you can lay an insulation layer on the roof, or you can have both thermal insulation and waterproofing, and use the principle of air insulation. This method is generally to use foam to keep out the heat.

Flexibility in the interior layout and decoration of timber rooms. Not only does the cottage offer a variety of exterior architectural styles, but it also offers considerable freedom in interior layout and decoration, allowing the designer's imagination to be unleashed and the individual needs of the consumer are met. In addition, the construction period of the cottage is about 1 2 of the traditional house, the construction period of the traditional house is 6 10 months, and the construction period of the wooden house is 3 4 months, which greatly shortens the capital ** time for the developer and reduces the operating cost.

When the traditional house is completed, it is just a rough house, and the structural decoration of the wooden house is basically completed, and you can move in as long as there are personalized highlights. Moreover, the wood used in wooden houses is a very stable, long-lasting and durable material.

To sum up, wood is a very good electrical insulator, with low conductivity, wooden houses use the principle of sandwich insulation and air barriers, wooden houses have good thermal insulation performance, low energy consumption, and can greatly reduce the energy cost of consumers.

First of all, you need to prepare some prefabricated cement sheets, and lay brick piers on the roof according to the size of the prefabricated slabs to facilitate the erection of the prefabricated slabs. At this time, the prefabricated slab is equivalent to the roof, and the original roof is equivalent to the floor slab of the next floor. The air between the brick piers passes through both sides to prevent the top floor slab from being directly exposed to sunlight and causing the ceiling temperature of the residents to be too high, resulting in the indoor temperature not being able to drop, there is a problem here, that is, when laying the insulation layer, do not try to choose a good one with quality assurance in order to save money.

The building was turned into a video room. When doing it, I sacrificed a part of the floor height, and added a layer of insulation cotton at the top, because it is a video room, which has a sound-absorbing effect, because the house is the same area up and down, and I sealed two of the three terraces with the sun room, the main reason is that it has a large number of closed pores, so it has the advantages of lightweight, waterproof, heat preservation, heat insulation, fire resistance, frost resistance, sound insulation, etc., and energy saving and environmental protection, no pollution, no radioactivity and toxic and harmful substances, strong durability, as the top floor insulation I think should be the best way.

Insulation on the roof should be the most common method. This is based on the principle of air circulation, so that when sunlight hits the insulation, the high temperature will flow away with the air from the roof floor and insulation, so that the house can be too hot. But the laying of public ** can be used together, with good materials, and built as a whole.

Some multi-storey top plus pavilion, the attic is the kind of red tile spire, the transformation is more troublesome, that belongs to the old house, the attic floor is not high will be hot, rain leakage directly replace the red tile.

The best way to insulate the top floor is to make a roof insulation layer, which can be extruded plastic board or foam polystyrene board, with a thickness of about 5-10 cm. It is better to do it on the roof, and then make a layer of thermal insulation bricks on top of it. The thickness of the insulation can be based on the local thermal insulation, and a sunscreen can also be built on the roof, which can remove the sun off part of the hair, and people can also rest and enjoy the shade below.

I don't quite understand this and have no advice. You can make a roof, a layer of insulation, if it is a glass roof, you need to cover the film, it is best to ask the decoration master.

The roof can be added with other insulation materials, or in other ways to insulate, or you can choose to add some other materials on the wooden structure roof, the effect is very good, and it will also play a very good insulation effect, which can bring us great convenience, so we can choose this way.

I think that when decorating a wooden roof, you can add thermal insulation and waterproof layers on the roof, or you can buy some special insulation materials for laying, and then cover some boards, and finally cover with cement, so that you can do a good job of heat insulation and rain insulation.

You can make a glass roof on the wooden roof and mix and match, which solves the problem of lighting and insulation, and it is not particularly hot.

My suggestion is to apply waterproof material to the roof and then apply a protective layer that can cool down the heat.

In fact, we can buy some heat insulation boards and put them on the roof, and at the same time we should do some waterproofing, so that it will be a good solution, and it can be very easy and easy, and the cost is relatively low.

Use an inverted buckle to fix a layer of our fireproof thermal insulation board, and then make a layer of decorative surface.

If you want to add insulation to your roof, here are some common ways to insulate:

1.Roof insulation: Choosing the right roof insulation for coverage can effectively reduce heat transfer. Common roof insulation materials include glass wool, rock wool, polystyrene board, etc.

2.Roof reflective materials: Use roofing materials with good reflective properties, such as white roofing paint or reflective aluminum foil, which can reflect sunlight and reduce heat absorption.

3.Roof ventilation: Good roof ventilation can help reduce heat accumulation. By installing fans or air vents, air circulation is promoted to reduce the temperature under the roof.

4.Moisture-proof layer: Adding a moisture-proof layer on the basis of the waterproof layer of roof construction can avoid water vapor penetration and improve the insulation performance of the roof.

5.Roof greening: Build a green garden or plant 1190 on the roof, which can form a layer of covering, reduce sunlight and reduce indoor temperature.

6.Install shading facilities: Installing shading facilities on the roof, such as awnings, blinds, etc., can effectively block direct sunlight and reduce heat entering the room.

7.Indoor insulation measures: Installing a heat-absorbing layer or insulation layer inside the roof, such as heat-absorbing panels, insulation materials, etc., can reduce the transfer of heat to the room.

Please note that the exact insulation method may vary depending on factors such as roof structure, environmental conditions, and budget. It is advisable to consult with a professional architect or insulation engineer before carrying out insulation works to obtain the best insulation solution for your roof. <>

The house decoration should be carried out in the steps of thermal insulation, especially for the users who live on the top floor, the thermal insulation measures are very necessary. When the roof is insulated, the insulation material is indispensable, so what are the insulation materials?How to insulate the roofHow to insulate the roof

1. Lay the thermal insulation layer.

The most common method of top insulation is to lay insulation, which is effective in protecting from the sun in the summer. There are two main types of thermal insulation layers: thermal insulation bricks and thermal insulation paints, and the thermal insulation effect is relatively good.

There is also the simplest thermal insulation layer, which is to spread a layer of soil about 15cm thick on the roof, the cost is also low, and the thermal insulation effect is good.

2. Build an awning.

Another way to do this is to build an awning on the roof of the building, which not only insulates the heat, but also gives people an extra space to rest. The host can be provided with tea and chatting, but the construction cost is relatively large, and lighting should be considered.

3. Rooftop planting.

How to insulate the roofThe easiest way is to plant vegetables and fruits on the roof of the building, directly pave the soil layer to plant, or you can combine the frame type to plant some climbing vines or vegetables, which not only has a thermal insulation effect, but also can green the entire environment.

4. Water storage and heat insulation.

It is also a good idea to build a swimming pool on the roof of a building, as long as you fill the pool with about 20cm of water, it can have a thermal insulation effect. However, it is necessary to take into account the load-bearing function of the roof, and also consider the waterproofing, otherwise the construction of a swimming pool on the roof will also have an impact on the downstairs.

What are the thermal insulation materials

1. Polyurethane rigid foam.

Polyurethane rigid foam is a closed-cell microcellular foam material, which is characterized by small thermal conductivity, good thermal insulation effect, and convenient construction. However, the use of polyurethane rigid foam in China is in its infancy, and the scope of use is not very extensive.

2. Polystyrene board thermal insulation layer.

Polystyrene board is a thermal insulation material composed of cement and polystyrene foam, which has a strong thermal insulation effect, and the thermal insulation layer of polystyrene board not only has a good thermal insulation effect, but also saves costs and saves a lot of money for decoration.

3. FS cement fly ash insulation roof.

FS type insulation material is made of fly ash, foaming agent and foaming agent and other materials, which are poured and foamed at room temperature. FS type insulation material has low density and low thermal conductivity, so it has a good insulation effect. Another feature is that it has a uniform closed-cell structure, low water absorption, and the wetting process can be omitted during construction.

My quote: AboutHow to insulate the roof