How to raise hydroponic white palm to be more vigorous?

1. Temperature control: the temperature is the most suitable at 20 °C, and the temperature should be cooled down when it exceeds 30 °C in summer, and it should be above 15C in winter.

2. Suitable light: It is recommended to raise it in a place of astigmatism, and shade it in summer when raising it on the balcony or outdoors.

3. Clean water quality: change the water frequently, you can change the water once every 7-10 days, and the water quality can be well water.

4. Prune the root system: When changing the water, prune the yellowed and rotten root system, and disinfect the scissors in advance.

5. Replenish nutrients: add nutrient solution when changing water, just a few drops.

If you want to adopt the method of water farming, you can buy a vase with a large bottom, or a medium-sized fish tank.

Only the right temperature can help it grow, 5-30 degrees is relatively normal, within this range, it will not be harmed, it can grow normally.

It should be given diffused light, which is the most suitable light, and it is not necessary to let it get into the sun, especially in summer, and do not put it in direct sunlight.

Water and fertilizer: add water to it about a week in the high temperature season, change it once in ten days and fifteen days in winter, and add a little special hydroponic nutrient solution every time you add water, and mix it according to the instructions.

Water-fed bottles are prone to green algae, the roots become unsightly, and oxygen is depleted. When adding water, you should wash the dirt on the roots, cut off the old and dead roots, and wash the bottle. The water in the bottle only needs to be half or two-thirds of the root, and the rest of the water is exposed to help it absorb the substance.

In order to avoid its leaves from yellowing and affecting the ornamentation, you can spray its leaves with water from time to time to humidify, and it is best to spray it with foliar fertilizer once a week, which can not only increase nutrients, make the leaves more shiny, but also make it safer to overwinter.

The more vigorous maintenance methods for hydroponic white palms are as follows:

1. Moderate light.

Hydroponic white palm usually likes to bathe in the sun, which can make it grow better, but hydroponic white palm should not be placed in direct sunlight, otherwise it is easy to burn the leaves, so that the leaves gradually turn yellow and wither, usually hydroponic white palm is placed in astigmatism to maintain, and it needs to be given 2-4 hours of light in summer.

2. Change water and fertilizer.

If the hydroponic white palm is not changed in time, its water will be easy to deteriorate, affecting the growth of plant roots, usually need to change the water once a week, but also timely apply the nutrient solution to it, so that it can grow better in the container filled with water.

3. Temperature control in winter.

Usually white palm is increased when it is cultivated in water. Cold resistance, so how to raise hydroponic white palm, hydroponic white palm in the south, put it indoors and carefully maintain, and the temperature in the north is relatively low, it needs to be moved to indoor maintenance, give it light during the day and control the temperature above 0 in the evening.

4. Prune rotten roots.

When the white palm is soaked in water for a long time, its roots are easy to rot, and it needs to be taken out of the water in time, and the rotten roots are pruned and combed in time, so that they can regrow new roots in the water, and better absorb the minerals and other nutrients in the water, so as to grow better, and prevent pests and diseases.

Precautions for white palm hydroponics:

1. Watering: If the white palm has just been converted from soil culture to hydroponics, the water should be replaced once a day in the early stage, and after the plant grows 5cm of new roots, the water will be changed when the water is muddy, and the water will be replenished if the water is less.

2. Fertilization: Hydroponic white palm can live without fertilization, but the nutrients in the water are too small, and white palm will not bloom. When fertilizing, you should also pay attention not to over-fertilize, otherwise the white palm is easy to rot the roots.

Choose a container, choose a container with a small bottle mouth to help the plant colonize and grow vigorously; Controlling the temperature, the growth temperature can be controlled in a suitable environment of 5 -30 to promote vigorous growth; Replace the water quality, keep the water quality clean in time, and help the plants grow vigorously; Applying fertilizer and applying nutrient solution 2-3 times a week can promote vigorous plant growth.

Hydroponic white palm maintenance vigorous method1. Select a container

Hydroponic white palm needs to choose a suitable container, choose a narrow and small container with a bottle mouth, the plant is easy to grow vigorously in the later stage of hydroponics, you can add a small amount of stones to help the root system grow, pay attention to too many stones will squeeze the root system, so that the root system can not breathe water normally, resulting in poor plant growth.

2. Control the temperature

Hydroponic white palm is suitable to control the temperature in the environment of 5 -30, in the right temperature environment the growth of the plant is good, can also be placed in a sunny position to maintain, to help the plant grow vigorously, pay attention to the growth temperature of the white palm, high and low are easy to make it harmed.

3. Replace the water quality

When maintaining hydroponic white palm, it is necessary to change the water quality in time to ensure that the water quality of the cultivated plants is clean, and when replacing the water quality, it is necessary to check the growth status of the root system to see if there is a root system that has rotted due to long-term soaking, and finally clean the container, which can be conducive to the growth of the plant in a robust and vigorous state.

4. Apply fertilizer

Hydroponic white palm needs to grow vigorously during maintenance, you can apply an appropriate amount of fertilizer in the culture water quality, add 2-3 times a week of nutrient solution, can be conducive to the growth environment of the plant nutrients sufficient, promote the growth state of good and vigorous, can also apply an appropriate amount of foliar fertilizer, to ensure that the color of the branches and leaves is bright.

White palm hydroponics can be more prosperous from the aspects of temperature control, suitable light, clean water quality, pruning the root system, and supplementing nutrients.

1. Temperature control.

The leaves of the white palm are wide and sensitive to temperature changes, and the ambient temperature needs to be ensured in the process of hydroponics at about 20, which is the most suitable for its growth. In summer, it needs to be cooled down, not more than 30, otherwise the water temperature will also rise, which is not conducive to the growth of the root system. In winter, it is also necessary to take protective measures, the temperature of the growth environment can not be lower than 5 for a long time, it is best to move it to a warm room for maintenance, to ensure that the temperature is above 15, you can survive the winter smoothly.

Second, the light is suitable.

When cultivating the white palm, it should not be exposed to direct sunlight, and it needs to be placed in a place with astigmatism, especially in summer, if the light is too strong, it will burn its leaves. If it is maintained on the balcony, it is best to use the shade to instruct the thick net for shading, and it can also be maintained in the shade of outdoor trees, and the ventilation is also better.

3. Clean water quality.

Water culture is very important to protect the quality of the water quality of the white palm Jane plum, if the water quality becomes poor, it will directly affect the absorption of its roots, it must be changed every once in a while, generally about 7-10 days to change it, in summer, you also need to pay attention to whether there are insects laying eggs in the water, there will be bacteria that endanger the health of the white palm. It is best to choose well water for water change, the well water temperature is warm in winter and cool in summer, and it is best to stand and wait for the water temperature to be small before changing.

4. Prune the root system.

Check the root system every time you change the water, and prune it in time after finding the yellowed and rotten roots, and disinfect the scissors used to avoid secondary infection.

5. Supplement nutrients.

In addition, after changing the water, it is necessary to add a few drops of nutrient solution in the water, according to the size of the plant type and the amount of water, the amount of each addition should not be too much, and the concentration of the nutrient solution should not be too high, so as to avoid fertilizer damage.

When hydroponic breeding of white palm, it is necessary to place the plant in the scattered light to avoid direct exposure to strong light, and to replace the culture water every other week, so that the water quality is kept clean and clear, and promote the healthy growth of white palm, and when changing the water, add nutrient solution or phosphorus and potassium liquid fertilizer to the water to promote the differentiation of white palm flower buds.

1. Lighting conditions

Hydroponic white palm should not grow in an environment with too much light, when cultivating white palm in clear water, it is necessary to place the plant in a place where it can irradiate scattered light, so that it can receive no less than five hours of light per day, and in winter, white palm can be placed in a bright place to promote its photosynthesis.

2. Replace the water

When using clear water to breed white palm, if you do not replace the culture water for a long time, it will lead to yellow and turbid water quality, which will make the root system of white palm rot, you need to replace the culture water every other week, you can let the tap water stand for 1-2 days before use, to ensure that the water quality is clean and clean, and maintain the normal growth of white palm.

3. Fertilization management

White palm needs sufficient nutrients in the growth process, hydroponic breeding of white palm, need to change the water, drop to add nutrient solution, or diluted phosphorus and potassium liquid fertilizer, so that white palm grows more lush, and to spray preservatives or superphosphate on the flowers and leaves of white palm to prolong the flowering period of the plant.

4. Maintenance method

When the ambient temperature is higher than 32 degrees, it is necessary to spray water mist on the surrounding and leaves of the plant to improve the humidity of the air and promote the vigorous growth of the white palm, and regularly prune off the dead yellow leaves and insect pest branches of the white palm, so as not to lose excess nutrients and promote its growth of green new leaves.

1. Soil: It likes calcium phosphate soil mixed with rotten leaves and peat.

2. Light: It is very shade-tolerant, daily maintenance, it is recommended to block the sun, if it is exposed to the sun for a long time, it will cause discoloration of the leaves, and it may sunburn in severe cases, so it is best to give a little scattered light.

3. Watering: its demand for water is very large, the loam must be kept moist during the maintenance period, but can not accumulate water, if the water is too much, resulting in a large amount of water in the pot, it will be easy to cause root rot and leaf discoloration, when the summer is dry, it is necessary to spray around the plant frequently, take care of the moist environment.

4. Fertilization: Plants raised in water are definitely not as nutrient as sufficient in loam, so an appropriate amount of liquid fertilizer can be added to the water during the regeneration period.

1. Branching: Dividing it is usually carried out in May-June, taking the plant out of the container, splitting it from the roots, 4 leaves as a cluster, and planting in a position that shades 50% of the sun.

2. Seeds: After the flowers open, the seeds can be obtained by artificial pollination, and the seeds need to be sown immediately after picking them, and the germination temperature should be controlled at about 30, and they can germinate in 10-15 days after sowing, if the temperature is too low, it will cause the seeds to rot.

1. Hydroponic white palm is most likely to suffer from leaf spot, root rot, brown spot and other diseases, and when these diseases occur, the plants should be moved to a well-ventilated place in time, the diseased leaves should be cut off, and pesticides should be sprayed.

2. If scabies and red spiders are found, they should be sprayed with insecticides immediately or the plants and mosquito coils should be burned in a ventilated container.