-
The heating equipment with better results is as follows:1. Electric oil tin. Electric oil tin, is a very popular heating equipment in recent years, it is characterized by exquisite appearance, buy back can be used directly, suitable for the cold winter period is not long in the area, can achieve a short period of warmth effect.
This is a machine that uses electricity directly to heat the house, so it consumes a lot of electricity.
2. Heater. The heater is a more primitive heater, with forced convection heater, so that the human body can feel the temperature, its advantage is that it is small in size, easy to carry and move, and is very suitable for use in small rooms. However, the disadvantage is that it has a certain amount of noise due to the convection type warm air blowing.
Moreover, long-term high temperature will cause burning damage to the plastic shell, and the service life is not long. In terms of power consumption, it is more average, not too little and not too much.
3. European-style fast-heating furnace. The European-style fast heating furnace is divided into two parts, the upper part is the air outlet and the lower part is the air inlet, which is heated by the electric heating pipe in the middle. Cold air enters the air inlet to replenish, and after heating, it is discharged from the air outlet, and so on repeatedly to achieve the effect of heating the air.
The advantage is that there is no fan, and the principle of air convection heat dissipation is adopted, which truly achieves zero noise. But the disadvantage is that it consumes a lot of power.
-
Wing heat exchanger is a kind of equipment widely used in various industrial production fields, which transfers heat from one fluid to another through heat exchange, so as to meet the process needs of heating, cooling, evaporation and other processes in the production process. Corrosion-resistant heat transfer oil-fin heat exchangers are designed for situations where corrosive materials need to be handled in specific production processes. Due to the special nature of corrosive materials, ordinary fin heat exchangers cannot meet their production needs, so heat exchangers made of corrosion-resistant materials are required.
Finned tube radiator.
Corrosion-resistant heat transfer oil-fin heat exchangers are usually made of highly corrosion-resistant materials such as titanium and stainless steel, and the internal structure design has also been specially optimized, which can effectively prevent materials from being trapped inside the heat exchanger, thereby avoiding corrosion and damage corrosion. Because the heat transfer oil finned tube radiator heats up quickly, has good fluidity, and is non-toxic and odorless, the heat transfer oil finned tube heat sink is often used in the industrial field.
Finned tube radiator.
In order to prevent dust from affecting the heat dissipation equipment, the finned tube radiator has developed a mask, which covers the finned tube radiator, which not only prevents dust and is easy to clean, but also prolongs the service life of the finned tube radiator.
Finned tube radiator.
-
In the cold winter, the Sanheng system realizes the freedom of bare feet at home, cold wave warning, cold air attack, and sub-zero temperature.
The whole country switched to low temperature mode, and the friends shouted "Frozen!" Cry! Finish! ”
If this winter is destined to be cold, it is better to use the Sanheng system to give your family warm care!
The Sanheng system can provide a comfortable temperature environment for the home, so that the indoor temperature is kept in the comfortable temperature range of the human body all year round, there is no blowing sensation and no noise in the room, and the temperature in every corner of the home is uniform, the four seasons are like spring, the old cold legs are no longer committed, and the children are not easy to get sick.
-
Floor heating is the best heating equipment, it is divided into electric floor heating and water floor heating, in which electric floor heating uses renewable resources for power generation, environmental protection and energy saving, and does not produce any noise.
1. Floor heating is to use the whole ground as a radiator, through the heat medium in the floor radiation layer, evenly heat the whole ground, and heat supply to the room through the ground by leakage radiation and convection heat transfer to achieve the purpose of comfortable heating.
2. According to different heat transfer media, it is divided into two categories: water floor heating and electric floor heating, and according to different pavement structures, it is mainly divided into dry floor heating and wet floor heating.
3. When using floor heating, it is necessary to pay attention to when the outside temperature is indeed 0 degrees, and the floor heating must not be turned off without special circumstances to prevent the pipe from freezing and cracking.
4. If the installation is water floor heating, you need to clean the water pipe after a period of time to avoid blockage.
-
The light pipe radiator device of the heating equipment is simple, and people usually choose the device in the non-heating period, and generally speaking, it will not be affected by external climate changes. Dry season. It is also necessary to carry out internal anti-corrosion treatment, which is an anti-corrosion measure to be taken for radiators of any material, of course, all copper water radiators can be excluded.
Moreover, some requirements are put forward for the internal anti-corrosion treatment liquid, such as the anti-corrosion layer should be uniform and the adhesion should be stable. According to the specifications of different pipe diameters, the light pipe radiator is divided into A type and B type, which have different shapes and ranges. For families in the north, radiators are not new in ordinary times.
Radiators provide us with warmth and need to be serviced at the same time. In the process of making the radiator, its different parts are connected by different welding, and the quality of its welding will directly affect the quality and service life of the radiator itself to a certain extent, and the welding process mainly includes filler welding and body welding.
Optical pipe radiator.
Optical pipe radiator.
Light pipe radiators (or heat sinks) and fan coil units. Several devices have their own advantages and disadvantages. When using floor radiant heating, the radiation area is large, the heating is uniform, and because the pipe is laid in the lower part of the greenhouse, the distance from the crops is closer, and the temperature of the water supply and return can be appropriately reduced.
The heat dissipation of type A and type B radiators can be divided into type A type light pipe radiators (for steam) and type B light pipe radiators (for plumbing), the main difference between these two types of radiators is the difference in their own structure, which causes the heating system that can be used and the pressure they bear are different. It is mainly used in the heating system of industrial plants, and is connected by seamless steel pipes, which is easy to use and can provide sufficient heat supply. A new energy-saving radiator made with a robust special welding process.
Optical pipe radiator.
-
Hello, about what kind of heating equipment you said is good, of course, it depends on where you are used, if you use it in the farm or greenhouse heating, the existing oil hot air fan effect is still good.
The fuel hot air blower has been unanimously favored by industrial sites for its rapid heating, uniform heat dissipation, wide heating area, intelligent constant temperature, set temperature, automatic shutdown when reaching the set temperature, and automatic start heating when the temperature is lower than the set temperature. The operation is simple, as long as you fill up the oil and set the temperature, you basically don't need to be supervised. Many large factories have started to use diesel hot air blowers for heating.
There is also an electric heating fan can also be used in the farm or a small area of local heating, heating, etc., the above two heating equipment has its own advantages, but in general, the heating effect of the fuel hot fan and the electric heating fan is very good. It is a good product for winter heating. The above are the differences of heating equipment, I hope it can help you.
-
Question: Now I'm using coal for floor heating. The price of coal is too high, I want to change to a kind of electrical equipment for heating, a lot of electric heating equipment, we don't understand, please ask the teachers to help refer to it. Thank you [agree].
Wait a minute.
Question: Electricity for underfloor heating.
Question 150 sq.
-
Summary. Introduction to the fast-heating stove 1, this is a fast-heating type heater, so it is very suitable for people who are afraid of cold. 2. It can be used for bedroom, study, bathroom heating, and the living room needs to close the doors and windows to maintain good sealing, and the use space is relatively wide.
3. The heating area is relatively large, generally 1500W is suitable for 12 15 use, and more than 2000W is suitable for 18 25 use. 4. The appearance is fashionable, the body design is slim, and it takes up a small space! <>
Kiss! Hello kiss, I'm happy to serve you, through the official query shows, the heating equipment fast heating stove is the first kiss!
The baseboard heater and the electric heating film are in second place, yo kiss! <>
Introduction to the fast-heating stove 1, this is a fast-heating type heater, so it is very suitable for people who are afraid of cold. 2. It can be used for bedroom, study, bathroom heating, and the living room needs to close the doors and windows to maintain the good sealing of the good hand, and the use of space is relatively wide. 3. The heating area is relatively large, generally 1500W is suitable for 12 15 use, and more than 2000W is suitable for 18 25 use.
4. The appearance is fashionable, the body design is slim, and it takes up a small space! <>
Dear, please be sure to wear a mask before traveling, do a good job of epidemic prevention and prevention, warm reminder of the epidemic, it is a low-risk area, according to the current regulations It is necessary to have nucleic acid testing, registration and reporting regulations: 1For those who have a history of travel and residence in areas related to the local epidemic (follow-up areas, adjusted according to the dynamics of the epidemic), they should take the initiative to report to the community and village where they are located after arriving at Qingda, and conduct 2 nucleic acid tests (with an interval of 24 hours).
2.The epidemic situation changes in real time, and the policy may change accordingly, so it is recommended to report and consult with the community before coming. 3.
If you are on your way back to your hometown, you can also consult your brother in time if the epidemic situation changes.
-
1. Classification and selection of heaters: electric oil heater, European-style fast-heating stove, baseboard heater, heater, small sun, electric heating film; Mainly these 6 categories, different types of heater heating methods, heating scenes, heating effects, and applicable areas are different, according to their own heating needs to choose the corresponding type. 2. Heating rate:
Heater = Little Sun Skirting Board Heater Fast Heating Furnace Electric Heating Film Oil Ting 3. Safety: After continuous updates and iterations, the current heaters pay more and more attention to product safety, and the safety configuration has been perfect. If you have to sort it:
Baseboard heater = fast heating furnace heater oil tint electric heating film small sun 4, heating space, heating area: baseboard heater fast heating furnace oil tint electric heating film heater small sun 5, energy consumption: liquid heaters are high-power electrical appliances, always fail quickly to say that it is not power-saving, energy consumption is related to the product power, the type of heating element, and whether it has an intelligent constant temperature function.
6. No light and noise, heating comfort: baseboard heater = fast heating stove = oil heating film heater = small sun, simply put, convection type is better than strong light radiation type comfort, and the silent experience is also better. 7. Heat storage:
Oily Dry Waiter Skirting Board Heater = Fast Heating Stove Electric Heating Film Heater Small Sun.
Electric heating tables are now available on the market.
There are two main ways, one is the heating of the pins, and the other is the heating up and down. Relatively speaking, the power of heating up and down is lower, and my family bought Ricky. >>>More
There are many kinds of electric heaters, don't look at the brand first, ** from cheap to expensive are: >>>More
1 Air conditioners are more energy-efficient.
Because when the outdoor temperature is too low, the air conditioning heat pump is basically useless. When buying an air conditioner, it will be written in what environment it will be used. Generally, in the coldest season of winter, air conditioning and heating are basically useless. Some air conditioners will add electric heating to them, that's another story. >>>More
This needs to depend on your family conditions to decide what kind of filtration to use, if it is a new fish pond you can consider more, roughly divided into drip filtration system, overflow filtration system, Cip filtration system, if the space is abundant do not care about noise can choose drip + overflow, if the yard is not big, it is recommended to use Cyrp filtration system, simple and convenient, easier to operate.
In terms of heating methods, the general plumbing is better, well, the radiators are mainly 32 pieces. In this way, he can quickly dissipate heat into the air and increase the temperature of the room.