The wooden floor has been hit by a lead ball and there is a hole, is there any way to fix it?

There is a way to fix it. You can go to a professional repair shop, or you can buy some repair agents online to repair. You can pour a few drops of 502 glue inside.

Or take some newspaper, then make it into a powder, and finally mix it together. You can also rub it slowly with some sandpaper. Some nail-free adhesives can also be used.

Or hire some professional workers. This leaves no traces, looks exceptionally beautiful, and doesn't have any drawbacks. It can be filled with agricultural machinery glue.

And it is transparent after drying, and it has a good waterproof ability. Putty can also be used. Or marble gum.

Of course, there is a way, you should remove the broken wooden floor, and then put a new floor, you can repair it, and it will look like new.

You can put instant noodles in that pit, then use the same color paint to remedy, and finally smooth it with something, just like other places, there is no difference.

At this time, you can warp up this wooden floor, and then re-lay the wooden floor, and you must pay attention to protection, and never throw heavy objects on the ground, and be sure to choose some good quality wooden flooring.

Tips for repairing the floor There are cracks in the floor, and there are two ways to mend these holes.

Chop old books and newspapers into minced pieces, add an appropriate amount of alum, boil them into a paste with foaming water, embed them in the seams, and dry them to make them firm. Mix the sawdust with white glue, stir well, embed in the cracks, and sanded with sandpaper after 24 hours. Finally, the color is refilled with a professional color refiller for the floor, and then waxed for normal use.

If you don't want to replace the whole piece, clean up the small pit and ask if you can adjust the glue of the same color to make up for it!

Choose putty, repair the damaged surface, sand it is smooth, and it is painted. Plastic plastic putty can be used to repair damaged parts. Marble glue can also be repaired.

It is mainly to fill and modify the defects of the substrate such as pits, shrinkage pinholes, cracks, and small welds to meet the requirements of flatness and flatness of the surface of the substrate before topcoat. It is widely used in train manufacturing, shipbuilding, passenger car manufacturing, construction machinery manufacturing, machine tool machinery and equipment manufacturing, automobile repair, furniture, molds, concrete construction and various metal products, wood products, FRP products that need to be filled and repaired.

Considerations for using putty in extended data:

It is strictly forbidden to mix solvents such as "Tiannan water" to reduce the viscosity of the coating, otherwise the coating will blister, dent and crack, but the coating tools can be cleaned with Tiannan water. In order to reduce the viscosity of putty, it is necessary to purchase a matching putty resin from the manufacturer for adjustment. Close lid immediately after use.

It is strictly forbidden to put used putty into the original container. Putty curing agent is a dangerous chemical, putty should be stored in a cool place, away from heat sources, away from sunlight, to avoid backlog and collision.

Treatment of pits in composite flooring:

Cleaning up damaged areas; leveling and polishing with transparent putty; Prepare a brush with a little polyester paint similar to the color of the floor. Find something to cover it, or post a ** or something under the pit, change it, and forget about the inconspicuous one.

Take a screw, insert the damaged part of the laminate floor, tighten. Then use an electric drill to screw the screws in, preferably very deep, because the floor will be raised when repaired in the future, so you need to screw the screws down to consolidate the floor sinking. Then apply white latex evenly to the broken parts of the laminate floor, and apply more where the screws are screwed.

Then glue the damaged laminate flooring skin back together and press it tightly with your fingers. Then take a soft towel and gently wipe off any excess white latex. Then don't step on the broken place and let it dry out before sticking.

Wooden floors can be repaired with sawn wood powder, pigments and white latex from the original floor, or putty similar to putty, and then filled, sanded, and painted;

If the marks are small, wax directly. The scratches are large or numerous, and you need to sand them with fine sandpaper before waxing. There is a treatment in the laminate flooring industry to repair the corners of wood flooring.

The edge of the wood floor is like the appearance edge of the solid wood floor, and the wood floor is chamfered and finished, so that the laminate floor has a more realistic solid wood effect after paving.

At this time, you can remove this board and replace it with a new board; Then at this time, you can also use putty or toner to fill, and then you can also choose to repair with putty.

In fact, we can choose a smaller piece of wood, then add 502 glue, and then smooth it, and then put on the color it should have, so that it will be very perfect, and it will not be seen.

You can buy some restorative or go to a professional worker, or you can use toner or putty to fill it slowly. Or use some plastic cylinder mud. It is also possible to use some laminate flooring.

The laminate floor has been smashed into a pit, and there is basically no way to fix it, so you can only put a decorative object or other small furniture there to cover it.

It cannot be repaired because the damage affects the moisture resistance and brightness of the floor, and cannot be repaired.

Solid wood flooring is soft, which can give everyone a very good upper foot, but it happens to be because of this, so it is very easy to be hit. If you are not careful, it will be a pit. It has too much influence on the aesthetics and generosity.

Don't be in a hurry, try it with an electric iron first. You can use an electric iron, a dry towel and a towel to prepare things that must be prepared, but the speed of the towel will be further strengthened. You can refill the recess with water, cover the towel tightly, or remove the towel after wetting it to become a recess.

Then put the iron on the largest towel, move it back and forth, left and right, and stretch it out in the middle, and the dented area will gradually not be covered. Small potholes can be repaired to the extreme in 30 seconds, and large ones need to be repeated several times. Although it can't be filled completely, it will look much better than a large pothole.

Because the solid wood floor is a natural stone, it has a certain speed, that is, it can rise after moisture absorption, making up for the original dents. Therefore, laminate flooring or laminate flooring should not be done like that, but it is relatively wear-resistant. First, the waste newspaper is crushed into powder, and then put into the Ming Gong to make noodles.

Then the floor is filled, smoothed, and cooled for 24 hours. After drying, polish and level with an abrasive cloth until it is leveled like a floor. If you apply resin paint to the surface and choose a color similar to the original road surface, you may not be able to see the marks after repair.

Flooring made of solid wood panels has always been very popular with everyone. Because it is made of pure natural wood, it has a very unique sense of layering, comfortable feet, overall environmental protection, and basically no indoor formaldehyde and other problems. However, this type of flooring can be said to be the most expensive of all floors.

Composite flooring raw materials are very common, among which composite solid wood flooring raw materials are very popular with everyone, and are converted into a variety of pure natural wood, with the beauty and comfort of solid wood boards, and more resistant to high temperatures, insects, waterproof and other characteristics than solid wood floors. In the general class, there are a large number of people who elevate the class of the audience at the bottom. The price is accepted by most people, and there are many advantages such as insect resistance, wear resistance, high temperature resistance, etc., but the upper foot is hard and the ductility is poor.

The hot expansion and cold shrinkage method is to prepare a towel in advance, soak it in hot water and knead it into a ball, cover it on the dents, and iron it dozens of times with an electric iron to make the water penetrate into the recesses of the road surface and level it.

This type of restoration method must combine the raw materials of the floor and the height of the pits to determine its practical effect. Sometimes it is difficult to succeed in one go, so you can try several times, and you need to be careful not to be burned by the iron during the whole exam, and you don't have to harm other parts. Terrazzo.

Especially for small shallow potholes, you can polish the perimeter of it with an abrasive cloth, stop when the actual effect of leveling the visual effect is achieved, and apply floor wax on top to make it look like new. How to recharge a patch pack. If the pit is slightly larger, it is likely that it will have to be covered with some items.

Giant wood pellets are combined with melanin in the same hue as the wood floor, then rubbed in the recesses with milky natural latex, ground and leveled until dry, and then coated with floor wax.

Repair with cement, and then add some corresponding substances, this will play a good role and avoid problems.

If the pit is very large, you can find something to fill it up, and then apply white latex of matching color on it, or you can use putty to blend, fill, sand, and paint, which will make the floor very flat.

It is recommended to find a professional person for maintenance, so that there is more after-sales protection, more assured, if the pit on the ground is very large, you can use some latex putty that matches the color of the floor for filling and grinding, modification, filling the depression, so that you can make a more realistic repair effect.

If the pit is not particularly serious, you can add white latex of the same color as the floor to the sawdust, and then you can use putty to hook it to fill and polish the pit of the floor, which can be repaired well, and you can also buy some wood floor repair tools online, which can also be repaired simply.

You can replace the floor with pits, or fill it with some materials similar to the color of the floor, you can add latex with a similar color to the floor in the pit, and polish it after mixing it with putty, or you can find some professionals to repair it.

In such a situation, you can choose to repair it with a sewing agent, or you can choose to re-lay the broken wooden floor, replace it in time, and do a good job of opening the window for ventilation, so that it can be repaired.

The wooden floor can be replaced, or repaired by an experienced master, or it can be filled with something, or it can be specially repaired, or it can be repaired with a paint of a similar color.

Use putty, repair the damaged surface, smooth it and color it, and you're good to go. Plastic steel cement can be used to repair the damage. Marble gum can also be repaired.

It is mainly to fill and modify defects such as pits and shrinkage holes, cracks and small welds of the substrate to meet the smoothness and smoothness of the surface of the substrate before the topcoat.

It is widely used in train manufacturing, ship manufacturing, passenger car manufacturing, construction machinery manufacturing, machine tool machinery and equipment manufacturing, automobile repair, furniture, molds, concrete concrete buildings and various metal products, wood products, FRP products that need to be filled and repaired, etc.

Wooden floor pits are a common occurrence in some homes because the material of the floor is soft and susceptible to external forces. If the wooden floor is seriously damaged, it will cause the home environment to become unhygienic, and it will also affect the aesthetics of the interior, so it is necessary to bury filial piety in time.

1.Fading patch method.

If the floor is lightly damaged, you can use the fading repair method. This method is relatively simple, you only need to apply the paint that matches the color of the floor to the damaged part of the floor.

2.Patching method.

Patching is also a good way to deal with it. If the floor is badly damaged, you can cut off the broken pieces of wood and replace them with new ones. The new wood blocks should be of the same material and color as the logs, and the broken floors will be repaired by gluing them firmly.

3.Replacement of flooring method.

If the floor is badly damaged and no means of painting or patching are working, the best way is to replace the floor. First of all, you need to buy a new flooring of the same material and color as the flooring; Then, the broken part of the floor is cut off and a new one is replaced.

4.Sealing method.

If the floor damage is minor, but you don't want to use the fading repair method, you can choose the sealing method. The use of sealing agents can fill the voids in the broken parts of the floor while maintaining the integrity of the floor. The color of the sealing treatment should be the same as the color of the floor to achieve the best repair effect.

In short, for wood floors with different degrees of damage, we need to choose different treatment methods according to the actual situation. In terms of preventing damage to wooden floors, protective measures such as carpets can be added to the home to avoid damage to the floor during heavy pressure such as heavy objects. At the same time, it can also increase the work of floor maintenance, maintenance and other aspects in the home to prolong the service life of the floor.

If you have a hole in your wooden floor, it can be very frustrating. However, there is no need to worry as the situation can be taken care of. The following Na Chains are some strategies that can help repair smash holes in wooden floors:

1.Use a Wooden Floor Repair ToolFirst of all, you can use a wooden floor repair tool to fix the smashed pits. These tools include wood floor fillers and wood floor patches, which can be used to fill in the smash pits and bring the wooden floor back to level.

2.Replace a broken wooden floorIf a repair tool can't solve the problem, you can consider replacing the broken wooden floor. This may take a little more time and effort, but if the damage is severe, replacement is the best option.

3.Repair the floor and paint or wax itIf you have repaired your wooden floor using a wood floor restoration tool, you may need to paint or wax it. This helps to give the wood floor a more uniform appearance and protects it from future damage.

4.Seek professional helpIf you're not sure how to fix a hole in your wooden floor, or if you think the problem is too complicated, you may need to seek professional help. Wood floor restoration companies can provide professional restoration services to help you solve the problem of broken floors quickly.