After brushing the wood paint directly on the large core board, how to remedy the peeling after a lo

Repaint, scrape off the peeling area, reapply a layer of paint, and the problem is solved.

If the peel is peeled for a long time, you can moisturize it moderately to make the skin softer, and then apply a protective layer of paint again.

The peeled part is scraped off and then repainted with paint of a similar color, and then sanded to restore the way it was before.

After a long time of peeling, remove all the peeled paint, and then repaint it, it will look good.

Joinery woodboard, commonly known as large core board, wood core board, woodworking board, is made of two pieces of veneer in the middle of the glued splicing board. The total thickness of the two-sided adhesive veneer of the blockboard shall not be less than 3mm. It is mainly used for furniture, doors and windows and sets, partitions, false walls, heating covers, curtain boxes, door sets, etc.

It is a wood-based panel made of wood or other lignocellulosic materials, made of fine wood fibers on both sides, long wood fibers sandwiched in the middle, and glued under heat and pressure after applying adhesives. It is a board produced by the process of particleboard.

<> if the amount of glue used is less than that of solid wood particle board, the amount of glue used in the large core board is less, but the environmental protection of the board cannot be measured simply by the amount of glue. It is also necessary to consider the environmental protection of the glue used, if the particle board uses a good environmental protection glue, and the large core board uses a less environmentally friendly glue, the particle board can also be more environmentally friendly than the large core board. Some imported particle boards are more environmentally friendly than domestic ordinary large core boards.

Advantages: The flatness of the plate is better than that of the large core board, and the strength is high and it is not easy to deform and warp; Because the inside of the board is crossed and scattered granular, it has stronger grip resistance and nail strength, which is better than ordinary MDF, and is the mainstream material for furniture. Large core board, commonly known as fine wood board, is a plywood that is cut into strips and spliced into a core, and the outside is veneered.

The surface material can be divided into plywood, plywood, etc. according to the number of layers. The surface of the flat Zen cave is smooth and not easy to deform, and most of the market is solid, double-sided sanding, five-layer fine wood, glue and so on. The specifications are:

It is mainly used for furniture door sleeve partitions, etc.

First of all, let's talk about the internal structure of the stamen board and the solid wood particle board, the inside of the solid wood particle board is pressed with sawdust mixed glue, and then pressed with melamine veneer paper, the stamen board is pressed with a large piece of solid wood board mixed glue, and then pressed on the melamine veneer paper, the only difference is the difference between the sawdust and the wood board, ** is also more than doubled, the specific choice of personal tends to the big stamen board, the material is better, and the price of a mu is a penny.

Generally, no, it depends on how long you grow. In addition, the finishing layer of the surface of the large core board is thinner, and it is suitable to paint directly without dismantling the land The large core board must not be directly painted, and it will definitely peel in the later stage. The brigade must not be painted on the core board, and there will definitely be problems in the later stage of brushing, and it is generally necessary to paint after the ash.

I think it will peel after a long time, because this operation does not make the paint stick to the board very well, and there are hidden dangers.

After brushing the wood paint directly on the large core board, it will peel after a long time. Because paints have some shelf life, over time, there will be problems.

After all, paints have some shelf life, and the quality will be problematic after a long time.

It will peel, so you can't directly brush the wood paint on the large core board, but brush a layer of protective liquid on the surface and dry it before brushing this paint.

Yes, after painting, it will peel due to dampness and other reasons, and the effect is not very good.

Yes, because these paints are not easily fixed to large core boards.

Peeling will be peeled after brushing the wood paint directly on the large core board. If the amount of glue used is less than that of solid wood board particle board, the amount of glue used in the large core board is less than that of the solid wood board, but the environmental protection of the furniture board cannot be considered purely by the amount of glue used. It is also necessary to fully consider the energy saving and environmental protection of the applied glue, if the particle board is applied with good environmental protection glue, and the large core board is used with very poor environmental protection, the particle board can be more environmentally friendly than the large core board.

There are some imported particle boards that are more environmentally friendly than the general large core boards in China.

Advantages: The flatness of furniture board is better than that of large core board, and the compressive strength is high, and it is not easy to deform and contract; Because the internal structure of furniture panels is overlapping and scattered particles, it has stronger wear resistance and is stronger than ordinary high-density boards, and is a popular material for home furnishings. Large core board, also known as blockboard, is a wood-based board that cuts wood into strips and pieces together into a core, and the outer resin veneer material.

The substrate can be divided into plywood, plywood, etc. according to the number of superimposed layers. The surface layer is neat and smooth, not easy to deform, the vast majority of the sales market is solid, two-sided stainless steel polishing, five-layer fine wood, glue and so on. The specifications and models are.

It is mainly used in furniture, door frames, decoration partitions, etc.

First of all, the internal structure of the stamen board and the solid wood board particle board, the internal structure of the solid wood board particle board is inhibited by wood residue mixed glue, and then pressed on the melamine resin veneer paper, the stamen board is inhibited by the block of solid wood board mixed glue, and then pressed on the melamine resin veneer paper, the only difference is the difference between the wood slag and the woodworking board, the price is more than doubled, the actual selection of my preference for the stamen board, the material is stronger, and the goods are worth a penny. The wooden cabinets in the home are blunt and ugly. This is mainly due to the fact that there is no topcoat.

If such a problem occurs, the old paint can be sanded off with dry humidity sandpaper and then painted again. If the weather is cold, the construction can be stopped. If the weather is cold, if the indoor ventilation is not very good, it is very easy to cause the wood paint to dry and sluggish, and you can use the room temperature to deal with it.

If the surface of the furniture is too greasy, you can first remove the paint with paint remover, then heat it to remove the greasy feeling, and finally brush it again. Molting of wooden furniture is also a difficult problem, and the environmental humidity of furniture panels is too high. The adhesion of the plating will be reduced.

Therefore, the moisture content of the wood should not exceed 12%, and the paint should be protected from sprinkling.

Generally speaking, it will not peel, but it may peel over time, so don't paint it directly.

If you do this, it will peel in the future, and it is generally better to carry out a certain treatment first, and then paint it.

The finishing layer on the surface of the large core board is thinner, and it is not suitable for direct painting, so the large core board can be sunk to the bottom, and the veneer can be veneered before it can be painted.