How to renovate the wooden floor of an old house, how to renovate the old wooden floor

Updated on home 2024-07-13
4 answers
  1. Anonymous users2024-02-12

    The steps for refurbishment are as follows:1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

    2. Polishe off the original surface of the floor by 1-2 mm.

    3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

    As far as the types of flooring on the market are concerned, laminate flooring cannot be renovated, while multi-layer solid wood flooring has different surface thicknesses, and the thickness of the thin skin is generally about millimeters.

  2. Anonymous users2024-02-11

    Wood flooring is currently a kind of material that many people use to sell simple materials, you must know that it has a comfortable foot feeling, so it is deeply liked by people, and it is also a very environmentally friendly floor. Let's introduce to you how to renovate the old wooden floor.

    1. First of all, use a large renovation machine to polish off the surface paint layer of the wooden floor, in the corners, the machine may not be able to polish, it is recommended to use a small angle grinder to polish, polish the paint layer on the surface of the floor and then sand, so that the surface of the floor is more smooth and delicate.

    2. After sanding the floor, you can check the corners around the floor, especially the gaps, to see if there is any transparent filling, if there is a need to clean up and then refill the joints, and then you can brush the floor with primer.

    3. After the first primer on the floor is dried, start to polish the surface of the floor with sandpaper, grind it to the surface of the bucket brigade surface is a little rough, clean up the dust from the polishing, and polish the floor to 3-4 times according to this step until it is smooth and flat, and there are no flaws.

    4. After the floor is sanded, you can brush the topcoat of the special floor, wait until the topcoat is completely air-dried and then apply floor wax, and then use it normally after air-drying.

    How to maintain wooden floors.

    1. Keep it clean.

    Usually pay attention to keep the floor clean and clean, and clean the ground with dust or stains in time to avoid long-term accumulation and increase the difficulty of cleaning the ground.

    2. Prevent the erosion of acidic and alkaline substances.

    Wood flooring is susceptible to the erosion of acids and alkaline substances, so acidic and alkaline items cannot be placed directly on the surface of the wood floor. If it is accidentally spilled, it should be cleaned up with a rag in time, and secondly, some heavy objects or sharp objects should not be placed on the ground.

    3. Pay attention to humidification.

    The surface of the wooden floor should also maintain a certain humidity, especially in the dry autumn, you can put a basin of water in the corner of the wall, and if the conditions are good, buy a humidifier to humidify the effect better, so as to avoid the cracking and deformation of the wooden floor due to drying.

    4. Regular maintenance and waxing.

    Some wood floors are not cheap, and in order to maintain the brilliance of the surface, it is necessary to wax and maintain it every once in a while to enhance its service life. Usually, you can buy your own maintenance liquid for maintenance, of course, if necessary, you can ask a professional company to deal with it, the effect is better.

    Summary: The relevant content on how to renovate the old wooden floor is introduced here, and when renovating the wooden floor stool, you must follow the process, and you must not treat it sloppily. If you want to know more about related knowledge, you can consult Qijia.com.

  3. Anonymous users2024-02-10

    1. Use a large floor to polish and remove the paint layer, surface layer, and wood layer for about millimeters, and then carefully sanding to make the floor surface delicate and smooth to a new state. The corners of the floor are sanded with a small angle grinder to achieve an overall smooth effect.

    2. Remove the original transparent putty on the side seams, reseal the joints, and then seal the entire floor with primer and wait to dry.

    3. After the primer is dry, brush the topcoat for the first time and let it dry.

    4. Carefully grind with water sandpaper, grind the surface layer until it is slightly rough, and remove the powder.

    5. Brush the topcoat three to four times according to the above procedures, and the last one does not need to be grinded.

    6. After the last surface is dry, apply floor wax.

  4. Anonymous users2024-02-09

    Old wood flooring is a unique and reminiscent and historical flooring, however, with time and long-term use, old wood flooring will gradually wear out, discolor, or crack and other problems, and this is when it needs to be renovated. Here are the steps and tips for renovating old wooden floors.

    Step 1: Sweep the floor.

    The first thing that needs to be done is to sweep the ground thoroughly. The purpose of sweeping the floor is to remove dust, garbage, and other debris from the ground and ensure that the surface of the floor looks clean and tidy.

    Step 2: Repair cracks and damaged parts.

    Secondly, inspect the floor for damage or cracks, and if so, repair them first. Use professional tools and floor patch materials to repair cracks and damaged parts to ensure that the floor surface is smooth and level.

    Step 3: Sandpaper sanding.

    Next, you need to use sandpaper to sand the ground. The thickness of the sandpaper depends on the material of the floor and the degree of wear. Usually from grit40 to grit180 gradually, you need to pay attention to the switching and direction of each roller in the process, so that the texture and color on the ground are more uniform.

    Step 4: Clean the ground.

    After sanding, the ground needs to be cleaned of dust and wood chips. Floors can be cleaned using a vacuum cleaner and a cloth.

    Step 5: Coloring and glazing.

    Finally, the ground needs to be colored and varnished. The process of applying color can be carried out using floor colorants and floor protectors, which can increase the durability of the floor. Floor wax can be used for varnishing and polished using a floor polisher to maintain the floor finish.

    During the whole process, it is necessary to pay attention to maintaining the temperature and humidity of the ground to avoid warping or cracking.

    In short, renovating old wood floors requires attention to details and technology, and only by ensuring the quality of the ground can the renovated old wood floors be more durable, beautiful and artistic.

Related questions
2 answers2024-07-13

The steps for refurbishment are as follows:1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house. >>>More

7 answers2024-07-13

Hardwood flooring. as ground.

A common variety of materials, there is a lot of knowledge in the use of materials. Hardwood flooring. >>>More

33 answers2024-07-13

Fill with cement. Cement can fill in the low places, so the problem of height difference is solved.

7 answers2024-07-13

1. Surface phenomenon: small cracks appear on the paint surface of the wood floor, which will cause the paint surface to peel off in serious cases. >>>More

10 answers2024-07-13

Anhui Hefei desiccant moisture-proof agent mildew tablets How to prevent moisture and mildew in the family rainy season How to prevent moisture and mildew in furniture How to prevent moisture and mildew in electrical appliances. >>>More