-
Not to come.
Painted over the walls of the self.
The wall must be scraped after the putty is scraped, and the bai can not be shoveled off with du
The blowtorch was shoveled off as soon as it was baked.
Zhi putty powder is a kind of building decoration material, and the main ingredients are talcum powder and glue. The surface of the newly purchased blank house is a layer of white - putty, usually the whiteness of the putty is above 90 and the fineness is more than 330.
Putty is a substrate used for wall repair and leveling, which lays a good foundation for the next step of decoration (painting and wallpaper). Putty is divided into two types: interior wall and exterior wall, and the exterior wall putty should resist wind and sun, so it has high gelatinity, high strength, and slightly lower environmental protection index. The comprehensive index of interior wall putty is good, healthy and environmentally friendly, so the interior wall is not used externally, and the exterior wall is not used internally.
Usually putty is gypsum or cement-based, so that the surface is rough and it is easier to bond firmly. However, during construction, it is still necessary to apply a layer of interface agent on the base layer to seal the base layer and improve the adhesion of the wall, so that the putty can be better bonded to the base surface.
Painted walls with wall paint, in general, it is not easy to hang putty powder. Putty powder is water-soluble, and it is not easy to bond with paint, and if it is not removed, it will leave hidden dangers on the wall in the future.
The surface of the wall painted wall is smooth and not easy to adhere, and when the seasons change, the temperature difference is large, and it will slowly fall off in pieces.
To decorate the house by yourself, you must tell the renovation workers that the trouble must be eradicated. Even if you increase your salary, you have to eradicate it completely.
-
Can you brush putty powder by brushing the back glue on the wall paint?
-
Yes, for the following reasons:
Some putty is easy to fall off the powder, and the latex paint is not easy to fall off the powder, the powder does not fall off the powder, just wipe the wall with your hands, you will find that many walls without latex paint will be easily stained with white powder on the hands, which is the reason why the home should be painted with latex paint.
After brushing the latex paint, the wall is more flat, the putty is paste-like, and after the putty is scraped, it has to go through the grinding process; The latex paint is in a liquid state, in contrast, it is easier to make the wall smooth, and the flat effect achieved by brushing latex paint is better than the effect after scraping putty.
Purchase method: according to their actual needs to buy general putty (Y type) or water-resistant putty (N type), normal wall we recommend the use of high-quality water-resistant putty, you can do it once and for all, because the putty layer is not a topcoat layer, easy to rework, once the putty layer has a problem, you have to shovel off, very troublesome, greedy for a small bargain, and then you have to pay more money.
To buy finished putty, the putty should have good packaging, and the packaging should indicate the implementation standard, weight, production date, packaging, transportation or storage precautions, and the product inspection certificate issued by the quality inspector of the manufacturer of the product. For the health of your family, do not buy unfinished putty that needs to be temporarily blended.
-
Mainly your requirements for the wall, good putty powder has the characteristics of white, light, hard and water resistance, even if you don't paint it, but the existence of putty itself is the auxiliary material of latex paint, the wall that has scraped the water-resistant putty is brushed with latex paint and renovated again, you can directly scrape the water-resistant putty powder again, you can not eradicate it, and the latex paint has waterproof permeability, and the fuel can be washed off on the wall, but the putty has water absorption will suck the pigment into the wall, which is not easy to get rid of. And the renovation to brush the primer can be a batch of putty powder, the wall paint is soft ** not so hard, the color has always been beautiful, just say so much, add a sentence, if the putty powder is not good, you brush any paint is useless, after moisture will peel off, renovation is not brush paint must be removed. So it is important to choose putty.
-
Definitely, putty powder will be powdered, and it must be brushed with primer and topcoat.
-
That's a must, otherwise the clothes will be a layer of white and dust.
-
If you can't shovel it off after brushing the wall paint, use spray putty to shovel it off! Walls that have been painted must be painted. In general, hangingPutty powderNot easy.
It is water-soluble and does not bond easily with paint. If it is not removed, the wall will leave hidden dangers in the future. The surface of the wall painted is smooth and does not adhere easily.
If you encounter seasonal changes, the temperature varies greatly and will slowly fall off, making it difficult to completely remedy it. If you renovate the house yourself, you have to tell the decorator that even if you add some wages, you can do it thoroughly.
Brushed with latex paint.
It is better to remove the old wall and then scrape putty.
and paint. You can use an abrasive cloth to sand the latex paint on the wall, then brush the putty, and then the latex paint. Latex paint is commonly known as latex paint. It is a type of acrylic ester.
Copolymer emulsion is a synthetic resin represented by emulsion coatings. Latex paint is a type of water-dispersible paint. It is a coating made of synthetic resin emulsion, which is refined by adding various additives after grinding and dispersing.
Latex paints have a number of advantages over traditional wall paints.
For example, it is easy to brush, fast drying, water resistance of paint film, good scrub resistance, etc. In China, people are accustomed to using synthetic resin emulsion as the base material, water as the dispersion medium, and adding pigments, fillers (also known as physique pigments) and additives. Paints that are made through a certain process are called latex paints, also known as latex paints.
All the walls of the old painted walls need to be removed first, then removed, and dust off the walls again. After that, you can scrape putty on the wall. When scraping putty, it is best to scrape it twice.
After the first scrape, you should wait until it is completely dry before scraping the second time. After scraping the putty, you can move on to the next step of wall decoration.
Before scraping putty, it is necessary to ensure that the wall is in a dry state, and the putty can not be scraped when it is wet, otherwise it is likely to affect the quality and effect of scraping putty, and it is easy to peel off and fall off in the later stage. No matter which wall decoration material you choose, it is best to choose a better quality material, which will be more environmentally friendly and more assured to use. After the wall construction is completed, you also need to pay attention to ventilation, you need to open the windows in your home, but you need to wait for the decorative materials and the wall to be completely glued together before you can open the windows for ventilation.
-
Painted walls can also be scraped with putty. Because you can first remove the old wall surface, and then scrape putty and apply wall paint.
-
I don't think it's okay to scrape putty on a wall that has been painted; The main reason is that the wall has been painted with wall paint, and if you scrape putty, you can't blend with the wall, and there is no way to find a balance.
-
Walls that have been painted can be scraped putty; Because latex paint has a waterproof system and a clear system, if the latex paint depowdering is not serious, you can directly scrape putty.
-
Dear, I'm glad to answer for you A: Primed walls can be made with putty powder. After scraping putty powder, the primer is painted, when the wall is found to be uneven or other reasons, you can scrape the putty powder again, but the putty powder needs to be dried thoroughly and then polished and then primed, because the primer is mainly to prevent Sentan mildew, alkali, and prevent the return to this fierce tung sand, etc., the wall is painted with latex paint is a very important thing, and the effect is also very large.
Therefore, the primed wall can be re-putty powdered.
-
Summary. Putty is not allowed to paint on the wall. Hello dear!
I am glad to answer your questions, I make the following: putty wall can be directly paintedPutty wall can not be directly painted, especially when there is floating ash on the putty layer, height inequality, it is not possible to directly brush latex paint, which will affect the bonding effect, it is best to polish the putty layer first, you can first use coarse sandpaper to polish the more obvious unevenness, and then use fine sandpaper to polish smooth before painting. Second, what to pay attention to in wall painting 1, pay attention to the hardware protection wall in the painting construction, it is easy to brush on other hardware, it is inconvenient to clean after drying, so before painting, we must first protect the hardware, you can paste a single-sided tape on the part that is easy to be painted.
2. Pay attention to the construction quality of wall painting has strict requirements for construction quality, because it is a direct external layer, requiring the professionalism of construction personnel, in order to ensure that the wall paint is formed once, if there is repair, it is not possible to ensure that the color of the coating is consistent and the thickness is uniform, which will have some impact on the overall aesthetics. 3. Pay attention to the maintenance of latex paint after construction to keep indoor ventilation, mainly to make the paint layer dry as soon as possible to form a film, especially in the northern winter period of the paint, the outdoor temperature is too low, it is easy to affect the effect of the paint film, so not only ventilation is needed, but also need to pay attention to heat preservation.
Is it okay to paint the putty wall.
Putty is not allowed to paint on the wall. Hello dear! I am glad to answer your questions, I make the following:
Can the putty wall be painted directlyThe putty wall can not be painted directly, especially when there is floating ash and unequal height on the putty layer, it can not be directly brushed with latex paint, which will affect the bonding effect, it is best to polish the putty layer first, you can first use coarse sandpaper to polish the more obvious unevenness, and then use fine sandpaper to polish the smooth before painting. Second, what to pay attention to in wall painting 1, pay attention to the hardware protection wall in the painting construction, it is easy to brush on other hardware, it is inconvenient to clean after drying, so before painting, we must first protect the hardware, you can paste a single-sided tape on the part that is easy to be painted. 2. Pay attention to the construction quality of wall painting has strict requirements for construction quality, because it is a direct external layer, requiring the professionalism of construction personnel, in order to ensure that the wall paint is formed once, if there is repair, it is not possible to ensure that the color of the coating is consistent and the thickness is uniform, which will have some impact on the overall aesthetics.
3. Pay attention to the maintenance of latex paint after construction to keep indoor ventilation, mainly to make the paint layer dry as soon as possible to form a film, especially in the northern winter period of the paint, the outdoor temperature is too low, it is easy to affect the effect of the paint film, so not only ventilation is needed, but also need to pay attention to heat preservation.
What are the benefits of painting on mud whitewashed walls.
On the one hand, it can make the wall stronger and firmer, and on the other hand, it can also make the wall smooth and flat, and the aesthetics are stronger. In addition to brushing putty powder, a layer of paint should be applied afterwards to prevent the wall from peeling powder.
I'm not an expert, I got inspiration through my own decoration, 1. Don't have dark floors, dark house haircuts; >>>More
I've done a lot of this in your family. The black stuff you call is generally the smoke sticking to mosquitoes and flies, or the feces pulled by flies. If you just batch two putty, it will definitely turn yellow. >>>More
One of my things is this, as long as the wall is flat, basically you can put wallpaper or paint after polishing, and the average family should reconsider decoration or wallpaper, painting, etc. after about ten years. I did this before moving in, and there was no problem for five years, and I could also brush the water on the wall to see if there was a bubbling after a few days, as the first floor said, and it was okay if there was none.
Invites. Once the house has been painted, it's best not to live in it immediately for health reasons! >>>More
The specific steps to make a wood grain effect on a steel pipe are: >>>More