Is it better to connect a wall hung boiler to floor heating or a radiator?

The wall-hung boiler is connected with floor heating or radiators, which is better, to be seen from the following aspects:

1. From the perspective of installation, it is better to connect the radiator, because the construction is less limited, and the floor heating needs to be buried before the decoration, and the radiator can be installed before or after the decoration.

2. From the perspective of comfort: the floor heating starts from the bottom of the foot, which is more in line with the comfort of the human body, and it is good to connect the floor heating from this point of view.

3. From the perspective of operation, floor heating is theoretically more energy-saving than radiators, and it is better to connect to floor heating from this point of view.

4. In terms of the speed of heating, the floor heating is generally two to three hours, some are as long as five hours, and the radiator is generally twenty to thirty minutes. Of course, there is a similar situation with the indoor temperature dropping after the shutdown. From this point of view, it is good to connect to the floor heating.

5. From the perspective of space utilization: floor heating does not occupy horizontal space, but occupies vertical space, and radiators occupy horizontal space. From this point of view, it is good to connect to the floor heating.

6. From the perspective of operation and maintenance, the flushing and maintenance of radiators is simpler, and the flushing and maintenance of floor heating generally requires a professional team.

It is okay to use a gas wall-hung boiler heating system at home, and to apply floor heating or radiators. But in comparison, I personally think it's better to use a radiator! Especially for gas wall-hung boiler users who have no one at home during the day, it is better to use a radiator and save gas.

Because the radiator is correspondingly fast, it can heat up quickly after the gas wall-hung boiler is started. Therefore, when there is no one at home, you can turn down the temperature or even stop the stove, and turn up the temperature when you get home from work. It works better with a temperature controller.

However, due to the large thickness of the surface covering, it takes a long time for the heat to dissipate after the gas wall-hung boiler is started, and the indoor temperature will rise, so it is difficult to make accurate adjustments.

I think wall-hung stoves.

Good underfloor heating. Advantages of wall-hung boiler floor heating: wall-hung boiler heating is energy-saving and environmentally friendly, because the wall-hung boiler adopts a separate heating method.

The wall-hung boiler is connected to the floor heating, so that the temperature does not need to be too high, which is energy-saving and environmentally friendly; If it is connected to the radiator, it needs 70 to 80 to increase the temperature of the space.

Floor heating is a bit hidden, it looks like the overall effect will be good, but the later maintenance will take some effort, and if it is a tile, once there is a water leak, you have to smash all the bricks, the cost is not low, the radiator will be simpler in the later stage, the cost of maintenance will be reduced a lot, but aesthetically speaking, there is definitely no floor heating beautiful.

So which one to connect depends on your own needs.

Hope you find these answers helpful!

The wall-hung boiler can be connected with the floor heating or radiators, and the corresponding power of the wall-hung boiler can be selected according to the floor heating area or the number of radiators.

The wall-hung boiler is well connected to the floor heating, and the indoor space is large and relatively clean.

The wall-hung boiler is well connected to the floor heating.

This is the commonly used way of self-heating, the two ways you said are very common, you can do it, depending on the actual needs of your home. ,, above, is Rubens,,。 Underfloor heating, the reference information provided by the warm qi sheet, 5

Radiators are better than installing radiators for the following reasons:

1. The installation of radiators is simpler, and the radiators installed in homes are basically installed on the wall. The common installation location is basically made of a certain wall in our room, for example, the living room is generally on a certain wall in the living room, if there is a window in the bedroom, it is generally on the lower side of the window, and it can be installed directly on the wall in the kitchen or bathroom.

2. From the perspective of later maintenance, the radiator is also simpler, for example, after a few years of heating at home, there may be a slight leakage, if it is the leakage of the radiator, it can be easily repaired. But if there is a leak in the floor heating, the pavement layer of the ground needs to be removed, if the ground is paved with tiles, the tiles should be removed, and then the concrete will be smashed open, revealing the floor heating pipe inside, so that it can be repaired.

Precautions for the use of radiators

1. Avoid changing the position of the radiator at will.

The installation position of the radiator is generally designed and installed through door-to-door measurement, and is arranged in a position conducive to indoor heating according to the user's house situation, which can ensure that the air convection and indoor temperature are relatively average, and once the location is changed, it will cause an imbalance in the indoor temperature. And once the pipes and radiators are displaced, there may be water leakage, causing unnecessary losses.

2. Avoid blocking the radiator.

In order to ensure that the radiator dissipates heat well, try to ensure a certain amount of heat dissipation space around it, and do not pile up sundries. Do not block the front of the radiator with a sofa or cabinet to avoid damaging the furniture. It is best not to cover the periphery of the radiator, excessive decoration not only affects the heat conduction and air convection, reduces the heating effect, but also is not conducive to the timely detection of the use of the radiator.

3. Avoid piling heavy objects on the radiator.

The weight of the radiator is limited, do not put too much heavy objects on it, and it is best not to use it as storage and stacking sundries in the non-heating season. In daily life, it is necessary to avoid the radiator being squeezed and bumped by heavy objects, so as to avoid water leakage caused by distortion and deformation of the internal pipes.

Summary. Hello dear, recommended radiators. 1. In terms of comfort, floor heating is more suitable for floor heating

This is a kind of heating method recognized by everyone, and it is laid under the floor heating pipe, which is better able to meet the needs of the human body for temperature, and the heat dissipation is relatively uniform, there is no hot air blowing feeling, and there will be no dust clean, and it is more environmentally friendly, from the center of the foot to the top of the head. 2. Comparison of heating speed: radiators heat up more quickly and floor heating:

People who have used floor heating know that floor heating is slow, and it generally takes several to reach a comfortable temperature, the main reason is that floor heating uses low-temperature water radiation, and the surrounding radiation objects must be heated before they can be gradually radiated, and finally the air in the room can be heated. Radiator: The radiator heats up quickly, and the temperature of the room can be reached from half a moment of opening to reach a comfortable temperature, and it does not need to be heated for a long time, so that it can be turned off at any time, which is suitable for most white-collar office workers.

3. Comparison of installation convenience: radiator installation is more convenient for floor heating: floor heating is a hidden project, the amount of work is large, especially the laying of floor heating pipes should be very careful, to avoid water leakage in the later stage, and only the rough house can install floor heating, there are certain conditions.

Radiator: There are two ways of radiator installation, surface installation and concealed installation, and both methods of blank room can be used. Concealed pipes are hidden, the construction is slightly complicated, and the house that has been renovated can only choose the surface-mounted installation method, and the open-mounted pipelines are short, convenient and fast, and the beautiful pipe technology of Huashang HVAC is a major breakthrough in the installation of open pipes.

Hello dear, recommended radiators. 1. Floor heating is more suitable for floor heating in terms of comfort: this is a heating method recognized by everyone, and floor heating is laid under the floor heating pipe, so that the heating method is better able to meet the needs of the human body for temperature, and the heat dissipation is relatively uniform, there is no hot air blowing feeling, and there will be no dust clean, and it is more environmentally friendly, from the heart of the foot to the top of the head.

2. Comparison of heating speed: radiators heat up more quickly Floor heating: people who have used floor heating know that floor heating is slow, and it generally takes several to reach a comfortable temperature, the main reason is that floor heating uses low-temperature water radiation, and the surrounding radiation objects can be heated gradually after radiation, and finally the air in the room can be heated.

Radiator: The radiator heats up quickly, and the temperature of the room can be reached from half a moment of opening to reach a comfortable temperature, and it does not need to be heated for a long time, so that it can be turned off at any time, which is suitable for most white-collar office workers. 3. Comparison of installation convenience:

Radiator installation is more convenient for floor heating: floor heating is a hidden project, the amount of work is large, especially the laying of floor heating pipes should be very careful, to avoid water leakage in the later stage, and only the blank house can install floor heating, there are certain conditions. Radiators:

There are two ways to install radiators, open and concealed, and both ways can be used in the rough room. Concealed pipes are hidden, the construction is slightly complicated, and the house that has been renovated can only choose the surface-mounted installation method, and the open-mounted pipelines are short, convenient and fast, and the beautiful pipe technology of Huashang HVAC is a major breakthrough in the installation of open pipes.

Mainly considering the installation and later maintenance.