The principle of the single wing drop testing machine, and what is the difference between the single

The drop tester simulates the situation of different edges, corners and surfaces falling to the ground at different heights after product packaging, so as to understand the damage of the product and evaluate the drop height and impact strength that the product packaging components can withstand when dropped. In order to improve and perfect the packaging design according to the actual situation of the product and the scope of national standards.

1.**Difference: Single-wing drop tester is cheaper than double-wing drop tester.

2.Drop height difference: the height range of single wing drop is 300 1500mm, and the drop height range of double wings: drop height: 400 1500mm

3.The maximum size of the test: the maximum size of the single-wing drop specimen is (L W H) 800 700 800mm, and the maximum size of the double-wing drop specimen (L W H) is 1000 1000 800mm

4.The area of the drop panel is different: the area of the single wing drop panel (L W) is 1700 1200mm, and the area of the double wing drop panel (W L) is 1200 1400mm

5.Difference in functional use: The single-wing drop testing machine is generally applied to the drop of the packaging box in terms of functional use, and the comparison rules can be achieved on all six sides. The double-wing drop tester is used for the fall of larger packaging boxes and irregularly shaped objects in terms of functional use.

Of course, when the customer chooses a single-wing drop tester or a double-wing drop tester, it mainly depends on the volume and shape of the customer's falling object to determine whether a single wing or a double wing, and if the weight of the object is greater than 60kg, you need to make another choice, you can consult with our Kunshan Haida Instrument sales engineer.

The single-wing drop tester can do a free drop test on the surface, angle and edge of the package, and is equipped with a stool missing digital height display and a decoder for height tracking, so as to accurately give the drop height of the product, and the error from the preset drop height is not more than 2% or 10mm. This machine adopts a single-arm double-column structure, with electric reset, electronically controlled drop and electric lifting device: easy to use; The unique hydraulic buffer device greatly improves the service life, stability and integrity of the machine Single-arm setting, which can easily place the product, and the angle error between the impact surface of the drop angle and the plane of the bottom plate is less than or equal to 5°.

The single-wing drop tester is designed to test the damage caused by a drop in the product packaging and to evaluate the impact strength during transportation and handling.

Display mode: digital height display instrument Drop height: 300 1300mm Maximum size of the specimen:

l w h) 1000 700 1000mm drop panel area: (l w) 1700 1400mm bracket arm size: 290 240 8mm

Drop error: 10mm

Drop plane error: 1°

Dimensions: (L W H) 1700 1400 2015mm Control box size: (L W H) 350 350 1100mm Machine weight: 450kg

Power supply: 1, AC380V, 50Hz

Transmission mode: electric transmission.

1. After each test, the drop arm must be dropped, so as not to pull the spring of the drop arm that has been reset for a long time, which will affect the test effect.

2. After the installation of the new machine is completed in the factory, it is necessary to add appropriate low-concentration engine oil at the sliding round rod, and it is strictly forbidden to add anti-rust oil or high-concentration engine oil and backlog of corrosive oil).

3. If there is too much dust in the oiling place for a long time, please lower the machine to the lower part, wipe the previous oil, and then re-oil;

4. The drop machine is an impact mechanical equipment, and when the new machine is used more than 500 times, the screws must be tightened.

This testing machine is specially designed to test the internal damage of the product caused by the fall during the handling or transportation of various products after packaging, and in order to prevent and eliminate the damage in advance, this machine can be used to predict the test, so as to obtain the best solution, so as to minimize the loss during transportation, and evaluate the impact strength of the electronic components when dropping during handling; Equipment for the reliability of the diamond, solution and surface of the packaging container.

1.height range; 300mm~1500mm

2.Test space: 800*1000*1000mm3Weight: 70kg

4.Height adjustment: chain drive.

5.Base plate area: about 1200*1800*20mm6

Main machine volume: about 2300*1200*1800mm7Control Console:

Approximately 1080*400*400mm8Power supply: AC 380V 50Hz 5P

9.Weight: about 700kg

10.Power: 750W

11.Test method: faces, edges, and corners fall in all directions.

12 Altimeter: Made in Taiwan.