What are the right steps for a newbie to start driving?

I will come to you to solve this problem for you and help you solve your problems.

When starting, turn on the left light (turn on the right light when the car is parked on the left), look in the mirror (remember), and start starting after confirming that it is safe. Step on the clutch and get into first gear (remember). The steps to release the clutch are:

Fast-stop-slow. Quickly find the semi-linkage point, at this time the car starts to shake slightly. Stop at this location.

1. Adjust the position. The distance between the front and back, the manual gear mainly adjusts the left foot, and after the ball of the foot steps on the clutch to the end, the foot has a slight margin. Automatic throttle adjustment.

If the feet are adjusted, the hands will generally not have much problem, and the hands will be convenient to operate the steering wheel. The backrest is based on comfort, and everyone's requirements are different, but from a safety point of view, try not to put it too low, driving while lying down will affect the function of the seat belt.

Second, familiar with the car. If you are not a commonly used car, first familiarize yourself with the use of gears, lights, horns and other equipment, and the settings of different car manufacturers are not exactly the same. You should be familiar with the gear before ignition, and other equipment can be familiar after ignition.

3. Prepare for the fire. Manually shake the stick left and right to see if it is already in gear. The automatic gear observes the gear situation and marks it very clearly.

For the sake of insurance, you should develop the habit of stepping on the clutch and igniting the brakes in the manual transmission, even if the car is in gear, there will be no problem with starting this way. Automatic transmission applies the brakes. That's why you can change your seat first and then light the lighter.

To sum up, this is how to drive a car for novices and how to drive and control the car.

The correct steps for novices to start driving: fasten the seat belt, adjust the seat reflector, hang neutral gear, ignition, hang first gear, release the clutch, slowly increase the gas pedal, the speed is up, hang the second gear, and adjust the gear according to the speed.

Novice driving. By car. The steps are. Let's take a look at the people around first, no one has accidentally touched them, and then look at the clutch. Then take a look at the turn signals, are they all okay?

The precautions for novices to start driving should be to first look at whether there are people around, and then look at the situation of the lights and the clutch.

The order of starting is as follows:

1. You must go around the front of the car and then enter the car through the front door.

2. Adjust the seat, rearview mirror, and wear a seat belt.

3. First hang neutral, and then turn the key to ignite (you can step on the clutch when ignition).

4. Step on the clutch and hang a gear.

5. From the rearview mirror and whether the front of the car meets the driving conditions, and then hit the left turn signal.

There are two situations in which the steps to drive are different:

1) The car is parked on flat ground: put the handbrake down, slowly lift the clutch, when you feel the car shake violently, you should hold still, if the car does not respond, then lift a little more, feel the car move, fuel the accelerator, the car will be started.

2) The car is parked on the slope: step on the clutch and foot brake, put the handbrake down, slowly lift the clutch, when you feel the car shake violently, you should stabilize the clutch and not move, the foot brake quickly let go, if the car does not respond, then lift the clutch a little more, feel the car move around, and then refuel.

Dangerous maneuvers to avoid when driving a novice car.

1. Drive to pick up ** or play with mobile phones.

Driving a mobile phone or answering ** is a dangerous action, whether it is in a traffic jam or on the road is not advisable, this will distract your attention, in case of any emergencies along the way, so that you can not react to the accident is likely to occur.

2. One-handed control of the steering wheel.

Nowadays, many car owners like to control the steering wheel with one hand to drive, free up the other hand to do other things or drive like this is more handsome. This is very likely to cause accidents, for example, if a car suddenly comes out of the side, it will definitely be slower to control the steering wheel with one hand, so it is likely to collide.

The above content reference: traffic safety knowledge learning - tips for starting a car and key points for starting a car.

First, start on a flat road.

1) Put your right hand into 1st gear.

2) Turn on the left turn signal with your right hand.

3) Press the horn with your left hand.

6) Listen carefully to the engine sound: if it gets low, refuel in time or loosen the parking brake pedal in time; If the engine noise becomes high, reduce the throttle or lift the clutch pedal in time.

7) Release the clutch pedal with your left foot after the car starts 3-4m.

Second, the ramp starts.

1) Put your right hand into 1st gear.

2) Turn on the left turn signal with your right hand.

3) Press the horn with your left hand.

4) Shift with your left foot and slowly accelerate with your right foot.

5) When the engine sound changes or the body shakes slightly, quickly release the hand brake, and then step on the accelerator pedal slightly, and slowly lift the clutch pedal.

7) Release the clutch pedal with your left foot after the car starts 3-4m.

1. Before starting to drive, adjust the seat to ensure that the left and right feet can step on the clutch, accelerator and brake, and when stepping on the bottom, the thigh and calf are naturally bent, and the front and rear positions of the seat are appropriate.

2. If it is a manual transmission car, then the first gear should be hung up when starting, and the clutch should be pressed to the end, and the right foot should be placed on the accelerator.

3. When the car starts, the clutch of the left foot should be slowly lifted to the halfway position, and when the car begins to shake, the handbrake should be released in time, and then a little throttle should be added to make the car start successfully.

4. When the car starts, you must step on the clutch and brakes, and when the clutch is halfway up, you must release the brakes, and at the same time add the accelerator to start successfully.

5. Don't be in a hurry to ignite after inserting the key when the automatic gear starts the hall, you should first step on the brake pedal, and then switch the gear from P gear to N gear, that is, neutral gear, and then rotate the key to start the engine, and then switch the gear to D gear, that is, the forward gear.

6. When the car is shaking, quickly release the handbrake, and then follow up the throttle, lift the clutch to the exact position, that is, complete the start. Automatic transmission cars need to apply the brakes when changing gears, and then change gears after the vehicle has stopped, because it is safer.

Vehicle: Citroen C6 manual transmission.

The first step is to insert the car key into the ignition, as shown in the figure below

The second step is to twist the key upwards and pause to let the oil pump start the self-test of the oil supply electrical equipment, as shown in the following figure:

The third step is to determine the position of the gear lever in neutral gear, as shown in the following figure

Step 4: Step on the clutch, as shown in the figure below

Fifth, the key in the upward twist for two seconds to hear the sound of the engine start normally, release the key, Dan Gao and then the dashboard lights up, as shown in the following figure

Sixth, release the clutch pedal with the left foot according to the essentials, and at the same time step on the accelerator pedal moderately to make the vehicle start smoothly, as shown in the silver pants in the figure below

What are the right steps to start driving? The correct steps to start driving: 1. Adjust the seat after getting into the car, improper sitting posture will lead to abnormal feeling while driving, and controlling the accelerator and clutch for a long time will be very fatigued; 2. Start the engine, usually the indicator light in the general state plate of the Bicha instrument should be repented, if the fault lamp is lit for a long time, it indicates that the source obstacle lamp before rolling is abnormal for the components, it should be turned off immediately, and the vehicle should be checked and the engine should be restarted after troubleshooting; 3. Step on the clutch deeply, press the clutch pedal to the end with your left foot, if the clutch pedal is not stepped on to the end, there will be a sound of hitting the gear when the gear is hung or even the gear cannot be put into gear, which will easily cause damage to the gearbox gear; 4. Hang to 1st gear, relax the parking brake lever, and observe the surrounding situation of the car at the same time to see if it has all the conditions for starting; 5. Release the clutch, slowly lift the clutch, find the semi-linkage point, and judge it by the engine sound, shaking and speed; 6. When you find the clutch linkage point, gently step on the accelerator, then the vehicle will shake slightly, and then the left and right feet move in opposite directions, the left foot continues to slowly relax the clutch pedal upward, and the right foot slowly steps down on the accelerator pedal, and the action should be slowed down.