What to do if the child s clay dries, what to do if the paper clay dries

Step 1: Cut or tear the clay into small pieces, which can be torn by the children, which can not only exercise the children's hands-on ability, but also allow the children to participate in the recovery steps of the clay;

Step 2: Add more water than the amount of clay for soaking, pay attention to the soaking time is not too long, control it in about 10 seconds, in order to master the time and water, this step is best operated by parents;

Step 3: Filter out the excess water over the clay, parents help the child to complete this action, which can increase the child's hands-on ability;

Step 4: Place the moistened clay pieces for 1-2 hours, taking care not to put them in a particularly dry place, during this time period, you can also let the child observe the change process of the clay;

Step 5: Pick out the clay that is basically melted into a piece from the box, you can slowly rub and play with it as you usually play with clay, this process can be completely completed by the child, let the child feel the changes in the clay with his fingers, this process of playing will be longer, and it can also be used to cultivate the child's patience.

If it's completely dry, there's no way to do it, and if it's not completely dry, add some warm water to make it soft. Because the composition of paper clay mainly includes paper pulp, foaming powder, water, and paste, if it is completely dry, it will melt away if water is added.

After usual use, put it in a sealed plastic box or cladding plastic film, it will not dry, it mainly depends on weathering and drying, and it can be kept dry for one to two months after being isolated from the air.

1. Cut the clay into small pieces, the smaller the better.

2. Then put it in a clean container and soak it in water. (There must be no oil in the container) and the water should not be too much, just overflow the clay.

3. Soak for 10 seconds, don't take too long (10 seconds is OK, don't absorb too much water) and pour out the water. Wait about 5 minutes for the clay to absorb the water.

4. Take out the ultra-light clay and knead it, and knead it repeatedly. Knead the strips. The ultra-light clay blends together and becomes soft. will restore the clay to its original state. (Let's rub this slowly.) You don't need to knead it all the time, knead it for 5 minutes and rest for 5 minutes to let the water and clay fully blend).

The clay will dry out if you don't use it for a long time! I believe that many friends who play clay will encounter this problem, so how can we make ultra-light clay recover from scratch? Don't worry, just follow these steps!

1.Cut the clay into small pieces, the smaller the better

2.Then add water and soak!

3.The soaking time must not be too long, about 10 seconds or so, and the water can be poured out!

4.And then you'll find that the clay becomes like this

5.Buckle out the clay and rub it patiently and slowly like kneading dough 6During this period, you should keep rubbing, you can rub it into various fun shapes to pass the time!

7.Eventually, the clay becomes like this! It's back to its original form, and there's a wood!

8.It doesn't matter if you add too much water, you can use this method of stretching strips to squeeze out the excess water

Write at the end! When you save the clay, you must pay attention to the closure, preferably in a closed, dry space, if the space is too wet, it may also cause the clay to grow hair!

1. Remove the hardened clay.

2. Cut it into small pieces with a knife (hand breaking is also OK), the smaller it is, the shorter the time to soften.

3. Add water and soak for about 10 seconds, don't take too long.

4. Drain the excess water.

5. Soak for 2 hours.

6. Take it out and rub it, and the color of the clay will stick to your hands at first, but as the clay becomes softer and softer, its viscosity becomes stronger and stronger, and the color on your hands will return to the clay again, and your hands will still be clean.

7. How about it, the clay has become softer! What you want to do depends on your performance.

Note: Add less water first, if not, it will be difficult to do more! If it is only slightly dry, wet your hands and rub them for a while, it is not recommended to wet the water directly on the clay.

Well, yes.

1. Cut the clay into small pieces, 2. Put it in a sealed container 3. Soak in water (soak for about 10 seconds) 4. Pour out the water.

5. Keep the clay moist for about 2 hours.

6. Take out the clay and rub it constantly (it will be sticky at first) and then it's good (if it's still too hard, start with step 2).