The toilet is often clogged, whether it is the toilet or the sewer

If the toilet drains slowly, the pipe is generally clogged.

If there is a blockage in the pipes, the water cannot be discharged. We need to dredge the sewer pipe, the more effective way is to use the pipe dredging agent, directly add it to the sewer, wait a little, fully dissolve, remove the blockage inside, you will find that the toilet drain speed will become faster, and it will be effectively solved.

Toilet blockage solution:

1. Slightly clogged toilet: generally toilet paper or sanitary napkins.

The toilet bowl is clogged by towel rags, etc., which can be dredged directly with a pipe dredging machine or a simple dredging tool.

Toilet blockage: Accidentally fall into plastic brushes, bottle caps, soaps, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

2. Aging and blockage of the toilet: If the toilet is used for a long time, it will inevitably scale on the inner wall, and in serious cases, it will block the air outlet of the toilet and cause the toilet to drain slowly.

The solution is: find the vent and scrape the dirt to make the toilet drain unblocked. Toilet installation error:

Generally, it is divided into: the outlet at the bottom is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

3. Squatting pit to toilet: some old houses are installed when building a squatting pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow, and when the toilet is recreated, the bottom elbow can be replaced with a direct bend, if it can't be replaced, then before installing the toilet, it is necessary to do a good job of cleaning up the bottom anti-water bend, and do not let cement or tile fragments fall into it during installation.

You should first check the reason, there are two reasons for the toilet blockage, one is that the toilet often goes to the toilet during use, and there are still foreign objects in the toilet, such as toilet paper that cannot be melted for a while and is blocked, and the other is that there are foreign objects blocked at the drain at the end of the sewer pipe and not going into the water. Another point: you check whether the joint between your toilet bowl and sewer pipe is installed properly, these reasons must be found, and the water can be connected after treatment, and there will be no more problems.

The toilet is often clogged, which can be the cause of the toilet or the sewer. It's all possible. The biggest possibility is the elbow of the toilet, which is the easiest to block.

In general, it is the cause of the sewer, if it is a toilet with a trap, and the water pressure is not enough, it may also be blocked, but it is relatively unlikely.

It's either a toilet or a sewer, and in general, it's a drain that isn't smooth, and if the sewer is unblocked, the water will go down with a hula.

Personally, I think there are two reasons, one is that the toilet is different from the sewer during the installation process, and the other is that there may be debris at the bend of the sewer, resulting in poor drainage, and it is recommended to ask the master to repair it immediately.

This depends on the situation, and there may be two reasons, so take a closer look at it a few times to see how it is blocked!

Of course, it is the problem of the sewer, the sewer is not smooth, and if you don't pay attention to the toilet bowl too much paper, it will cause blockage.

Toilets generally have a smooth surface, and human excrement can be flushed down by the pressure of water, but if something large or hard enters the pipe, it is easy to accumulate and clog the pipe and toilet, so it is recommended not to throw toilet paper and other waste into the toilet.

The toilet is clogged but still draining slowly – causes and solutions.

First, the pumping power of the water tank is insufficient.

Cause analysis: The slow draining of the toilet bowl is not necessarily a blockage problem, and it is very likely that the phenomenon of slow toilet draining occurs because the water pressure of the water tank is insufficient.

Solution: 1. First of all, increase the water volume of the water tank, the method is very simple, open the water tank, put an empty bottle in it, the purpose is to increase the buoyancy of the water tank.

2. In addition to placing empty bottles, you can also readjust the screw of the clockwise water inlet valve, at this time, you will find that the water level can rise rapidly, but the water level can not be too full, and it should be about 10 mm away from the overflow nozzle of the drain valve.

3. Open the lid of the water tank and adjust the amount of water. There are two plastic rods under the toilet water button, and there are cocks on them to adjust the length of the plastic rods to control the amount of water.

4. If the above method is done, the drain is still relatively slow, it may be that the toilet sewer pipe is blocked by impurities, check the toilet tank to the flushing outlet, and take a thin iron wire to dredge the impurities of the water tank.

Second, the blockage leads to slow draining.

Reason analysis: The toilet has been used for a long time, and the accumulation of stains is not treated in time, which will also cause the toilet to be blocked but still drained slowly.

Solution: 1. Remove the sewer pipe, place it in an acidic substance, soak it for a few minutes to eliminate the accumulated stains, and when you reuse, the water will be much faster.

2. If the soft items in the paper towel cause the toilet to be blocked, you can go to the hardware store to buy a leather pick, ** is very cheap, a few dollars to get it, a few hard strokes on the toilet mouth, and the toilet will generally be dredged.

3. If it is blocked by hard objects, such as accidentally dropping hard objects such as brushes, packaging bags, bones, etc., and it is ineffective to use a leather picker, it is recommended to ask a professional company to solve it.

3. Homemade dredging agent.

Buy a bottle of large cola and pour it into the toilet bowl and let it sit overnight, because cola is rich in carbonated ingredients, which will have a chemical reaction with the dirt on the toilet bowl and quickly dissolve the stains, which will reduce the adsorption of the dirt on the inner wall of the toilet bowl and let the dirt fall off quickly. Generally speaking, the next day, it will be solved with a flush of water.

If the toilet is clogged but it can still drain slowly, you can try it in the following ways.

1. Use a large bucket to rinse.

The toilet is clogged, there is too little water, of course it can't be flushed, you can use a large bucket, fill it with water and flush it directly into the toilet. Flush the poop down with the pressure of water. Rinse several times until the water flows smoothly.

2. Use a toilet plug.

If the water can't be flushed, then use the toilet plug, use the toilet plug in the toilet bowl and press it several times, remember, be sure to adsorb it before pressing, let the pressure of the vacuum suck up the clogged things, and then press it down, and finally flush it with water until the water can flow smoothly, which proves that the toilet is unobstructed.

3. Make use of a toilet unclogger.

For deeper places that are blocked, this method is very effective. Go to the hardware store to buy a toilet dredge or a bicycle tie, because this tie is hard and easy to bend, and then bring rubber gloves to insert the toilet dredge into the toilet, be patient, take your time, stir back and forth after insertion, back and forth dredge, slowly you will feel that the agitation is easier than at the beginning, then it proves that the dredging is effective, and it feels almost flushed with water and flushed until the water runs smoothly.

4. Find a property.

It's also a good idea to find a property or an experienced neighbor to help clean it up. If you don't have the strength, you can also find someone to help, after all, the person in the property has experience, knows where the problem is, and has the tools to help clean up.

5. Find a professional toilet unclogging person.

Find a professional toilet unclogger to help, but it will cost a little money! They will bring professional dredging tools, put the pipe into the toilet, start the engine and stir, and let it go for one or two minutes to ensure that it can be unobstructed.

Hello, the toilet is clogged.

But it is still slowly entering the water.

This situation indicates that it is not completely blocked.

It can be unclogged with a pipe uncrusher.

This situation indicates that the toilet has been blocked, but it has not been blocked, and then the underwater is relatively slow, it is recommended to boil a pot of boiling water, pour it into the toilet, and then close the lid and stuff for 15 minutes This is conducive to the dredging of the toilet Under normal circumstances, this repeated to the person boiling water two or three times The toilet can be drained smoothly.

The toilet is blocked, but it is still slowly draining, which means that the toilet is blocked, and it is still slowly draining, it is impossible to block it tightly, so it is still slowly draining, you had better find a professional to pass it for you.

1. Dun cloth method: use your mopping dun cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. If the toilet is blocked by a hard object, it can be solved in this way. Pick up the dirt first, put the water while carrying it, so that there is only water in the toilet, and then use a towel to dry the water, find a small environment, preferably the kind of small mirror on makeup, a flashlight, put the small mirror at the bottom of the toilet.

4. Adjust the angle of the light source and the mirror to see a part of the inside of the pipe, usually the small thing will be stuck in the innermost part of the pipe to bend downward, find a more suitable wire, if your luck is good, this small thing stuck in the toilet noise eye will be solved.

Toilet Routine Maintenance:

1. The user cleans the toilet at least once a week.

2. If the water source of the user's location is hard water, it is necessary to keep the outlet hole clean.

3. Frequent turning of the toilet seat will cause the fastening washer to loosen, please tighten the cover nut.

4. Do not knock or step on the sanitary ware.

5. Close the toilet lid and don't be too fast.

6. When the detergent is poured into the toilet, do not close the machine immediately, and close it after rinsing with water.

7. Do not use high-temperature water to scald the sanitary ware.

The toilet is blocked, but it is still slowly draining, at this time, it must be dredged in time, otherwise the next time you poop, it will be all blocked immediately, and you will never be able to go into the water again.

If the toilet is blocked and drained slowly, it means that the toilet is not completely blocked, so you should find a way to dredge it, otherwise it may be more blocked.

It's better to dredge it, if it's completely blocked, it's not easy to deal with, and it's not good to overflow.

Clogged toilets and drains are common problems we encounter in our daily lives. There are many reasons for these problems, many of which will be discussed in this article.

1.Solid waste: Solid waste such as paper towels, sanitary napkins, wet cloths, cigarette butts, kitchen waste, etc., is one of the main causes of clogged toilets or sewers. These things are thrown down the toilet or down the drain and, over time, can form sediment that eventually leads to clogging.

2.Grease: In the kitchen, we often cook all kinds of food, but the leftover grease can cause a blockage in the drain. When grease enters the drain, it cools down in the pipe and solidifies, gradually forming a long clump that eventually leads to a blockage in the drain.

3.Lack of cleanliness: If you don't clean your toilet bowl or drain regularly, they can get dirtier and dirtier, especially if you haven't used them for a long time.

Generally speaking, whether it is a toilet or a drain, the dirtier it is, the more likely it is to be clogged by various substances, so it is important to clean it regularly.

4.Poorly designed internal piping in a building: In some buildings, the piping may be unreasonable or too steep, which can cause the angle of the piping to be too steep for fluid to pass through the pipe, which can lead to clogging.

5.Weather factors: In cold weather, freezing of pipes can also lead to blockages of pipes. This is because the water expands after freezing, making the pipes narrow and difficult to pass through.

6.Not used for a long time: If the toilet or sewer is not used for a period of time, water can accumulate and deposit in the pipes, which can lead to clogged pipes.

In conclusion, there are many reasons for the formation and prevention of toilet and sewer blockages, and regular cleaning and proper use are the key to preventing these problems.