How to remove the steering wheel of a car, the steering wheel is locked, how to remove the steering

The steps of disassembling the steering wheel of the car are as follows, the tools for dismantling the steering wheel are prepared, there are two kinds of tools available for dismantling the steering wheel, the two groups on the left are in addition to the detachable Puli disassembly, the steering wheel is also very easy to use, and the one on the right is a special tool for dismantling the steering wheel. In addition, if you do not have tools, you can disassemble it by tapping or shaking it up and down, left and right. However, if the conical surface is sticky, or if it is bitten to death due to rust, it is necessary to use special tools.

If you have a car equipped with SRS, it is best to hire a professional to be more secure. If you really have to come by yourself, you must first disarm the SRS system and then remove the airbag. At first, the periphery of the steering wheel is lowered, and if there are no screws behind the back, the case can be removed with a little force.

At this time, you can first relax the screws of ** for 3 to 4 teeth (pull out the key from the steering wheel and kill it, you can fix it). Remove the necessary devices, and after that, you will definitely see 2 to 3 screw holes around the ** screws, which are used to remove the steering wheel. Prepare the tools, pay attention to be sure to place the match, otherwise it is easy to damage the nut or thread.

Set up the disassembly tool and lock the two screws, as shown in the figure: in fact, it uses the principle of reversing force to separate the tight cup joint. You can use a general wrench to rotate and force the steering wheel out.

Note that as mentioned earlier, as long as the nut is loosened, it is to protect the teeth of the central column from being damaged by the pressure of the disassembly tool. In this way, even if the central screw tooth is deformed due to compression, the tooth can be re-aligned when the nut is unscrewed.

Disassemble the steering wheel of the car: pry open the small covers on the left and right sides of the steering wheel, unscrew the screws in the six sides of the cover, remove the main airbag, and remove the plug. Remove the airbag coil. Then remove the large screw in the middle, and you can take off the steering wheel.

Many switch buttons in cars are installed on the steering wheel, and once they fail, it is indispensable to disassemble the steering wheel of the car. But due to misbehavior in operation, the operation of the steering wheel often becomes complicated and cumbersome. In fact, as long as you follow the correct method, it is relatively easy to disassemble the steering wheel.

1. Disconnect the battery;

2. Turn the steering wheel about 90°;

3. Use a small flathead screwdriver (Stard's small flat mouth is about the same, but slightly longer) from front to back into the hole behind the steering wheel;

4. Insert the head of the screwdriver into the middle of the circlip and the airbag hook, and use the clever force to lift the circlip strip away from the hook, and the side of the airbag will automatically pop out a little in the direction of the seat;

5. After that, turn the steering wheel 180° and continue to pick up the circlip on the opposite side (if it is difficult to pick up, it is recommended to gently press the side airbag that has been cocked, but you can't press the buckle into the circlip again);

6. Remove the airbag, pick up the yellow safety buckle behind the airbag, and then pull out the airbag plug to remove the airbag;

7. Pull out the socket of the airbag coupling coil above the inside of the steering wheel;

8. Use the spline of M12 to loosen the fixing bolt in the middle of the steering wheel counterclockwise;

9. Finally, carefully remove the steering wheel (take care to prevent the coupling coil below from rotating unexpectedly).

I have only dismantled Junjie's, to give you a little reference, the lump under the steering wheel, the left and right sides (that is, next to the turn signal lever and wiper lever) each have a plum screw, to use a plum wrench to reach in and twist. Unscrew the two screws to get out the airbag.

The steering wheel is naturally unlocked after starting the vehicle with the key, and the steering wheel automatically locks when the vehicle is turned off, which is a simple anti-theft function. But sometimes when parking, the steering wheel is placed at a certain angle, and this angle only turns the key to ignite but cannot unlock it. At this time, the car owner gently twists the key with his right hand, and gently turns the steering wheel with his left hand, and the steering wheel is automatically unlocked.

The extended data comes from more than 120 years ago, when the steering wheel, originally installed by the inventor of the automobile on a steam car, was mounted on a vertical steering column, the defect of which was not conducive to the driver's maneuvering and obstructed the view. Mechanics at Germany's Daimler AG overhaul a Felton stop-in car from Strickland.

A repairman tried to correct the crooked steering column, but accidentally found a new angle that made the steering wheel no longer difficult to operate and obscured the view. If you think of the steering wheel as a clock face, hold it between 9 and 10 o'clock with your right hand and between 3 and 4 o'clock with your right hand. In case of a collision, this posture is more conducive to supporting the body.

If you hold the steering wheel with only four fingers and your thumb attached to the steering wheel, when the wheel hits a stone or a high step, the front wheel will sometimes suddenly turn to one side, driving the steering wheel to turn quickly, and you may break your thumb. Many novices because of the poor feeling of the car, in order to see the front of the car clearly, try to adjust the seat to the front, almost with the steering wheel to drive; There are also some old drivers who like to lean back the seat back when running long distances, and drive half-lying down, which is not safe. The correct way to do this is to adjust the reclining angle of the seat back to about 110 degrees.

When driving, do not operate with one hand for a long time, and do not put your hand on the gear or window frame for a long time, except as required for the operation. When turning the steering wheel, don't push too hard, but retreat sharply. Do not turn the steering wheel after the vehicle has stopped.

When driving on rough roads, hold the steering wheel with both hands to prevent the steering wheel from getting out of control and causing accidents. If the steering wheel does not turn well, it is easy to get into an accident, so it is best to slow down when the vehicle is turning. When entering a curve, slowly turn the direction according to the arc of the curve.

If you just remember the number of revolutions and don't look at the front of the car, it is easy to have an accident. The steering wheel of the car does not turn, and the key does not move. What's going on?

A lot of new car owners have encountered such problems.

This is not always the case when the ignition is started, and the steering wheel is automatically unlocked after the vehicle is started with the key. Many car owners don't know much about this. But sometimes when parking, the steering wheel is placed at a certain angle, and this angle is just to turn the key to ignite but cannot unlock it.

At this time, the car owner gently twists the key with his right hand, and gently turns the steering wheel with his left hand, and the steering wheel is automatically unlocked. Impurities and rust must be removed first. The paint must be done in small layers, carefully applying a thin layer, and then a second coat after drying and curing, until it is flush with the surrounding paint surface.

After repair, wait for the paint surface to harden for a day before washing and waxing. There is a very if the body scratches are deep and the area is large, be sure to go to a professional shop. The steering wheel shook a little.

This is mostly caused by deformation of the tires or the drivetrain of the vehicle.

The steering wheel is locked, and there is no problem when removing the steering wheel, there are many circuits on it, so you only need to open the upper cover to remove the steering wheel.

The steering wheel should be unscrewed down, and some screws and tools should be placed in the car, so if there is a lock, then the steering wheel should be removed in time so that it can be installed again.

Open the car door, then find the car keyhole, insert the car keyhole, turn the steering wheel, at this time turn the car key to the ON position, the strength of shaking the steering wheel must be large, so that the steering wheel can be removed.

In such a situation, I feel that you should use a screwdriver to unscrew these screws, and then unscrew the lever of the steering wheel, and then you can remove the steering wheel.

Tool: Word change cone.

1. First find the screws under the steering wheel, where the steering wheel shaft touches, as shown in the figure below.

2. Use the slotted cone to twist the screw and remove the screw. Pay attention to the pry process to be evenly forced, and stop when you hear a click, as shown in the figure below.

3. After that, you can take off the cover plate on the steering wheel, as shown in the figure below.

4. After that, pry up the bolts that fix the airbag under the steering wheel cover plate with a modified cone, as shown in the figure below.

5. In this way, the steering wheel airbag cover is disassembled.

Summary. Hello dear, you first need to get off the periphery of the steering wheel, if there are no screws behind it, you can remove the case with a little force. At this time, you can first relax the screws of the ** 3 4 teeth (pull out the key from the steering wheel and kill it, you can fix it).

Then remove the necessary device, and then you will definitely see that there are 2 3 screw holes around the ** screws, which are used to remove the steering wheel. Then prepare the tools, pay attention to be sure to place the sleeve, otherwise it is easy to damage the nut or screw teeth. Remove the removal tool, and remove the nut.

Be careful, don't take out the steering wheel right now. Make a mark first, as indicated by the arrow. In this way, the position will not run out during installation, and the steering wheel will be deviated to one side.

Finally, take out the steering wheel, and you're done, and you can install it in reverse order. Hope mine can help you, oh dear<>

Hello dear, you first need to get off the periphery of the steering wheel, if there are no screws behind it, you can remove the case with a little force. At this time, you can first relax the empty screw of ** 3 4 teeth (pull out the key from the steering wheel and kill it, you can fix it). Then remove the necessary device, and then you will definitely see that there are 2 3 screw holes around the ** screws, which are used to remove the steering wheel.

Prepare the tools and pay attention to the fact that the sleeve must be placed, otherwise it is easy to damage the nut or screw teeth. Remove the removal tool, and remove the nut. Be careful, don't take out the steering wheel right now.

First make the mark in Douzhou, as indicated by the arrow. In this way, the position will not run out during installation, and the steering wheel will be deviated to one side. Finally, take out the steering wheel, and you're done, and you can install it in reverse order.

Hope mine can help you, oh dear<>

To disassemble the steering wheel of the car: pry open the small covers on the left and right sides of the steering wheel, unscrew the hexagonal screws in the cover, remove the main airbag, and remove the plug. Remove the airbag coil. Then remove the big screw in the middle, and you can remove the steering wheel of Minju.

Since many of the switch buttons on the car are mounted on the steering wheel, once they fail, the steering wheel of the car has to be removed. However, the operation of the steering wheel is often complicated and cumbersome due to improper operation. In fact, as long as you follow the correct method, it is relatively easy to disassemble the steering wheel.

Dismantling the Fang Hao Family Disc Guide:

1.disconnect the battery;

2.Turn the steering wheel about 90 degrees;

3.Use a small flathead screwdriver (similar to the small flat mouth of Shida, but slightly longer) to enter the hole behind the steering wheel from front to back;

4.Insert the head of the screwdriver between the circlip and the airbag hook, and lift the circlip up from the hook with dexterous force, so that one side of the airbag will automatically pop out towards the seat;

5.After that, turn the steering wheel 180° and continue to pick out the opposite circlip (if it is difficult to pick out, it is recommended to gently press the airbag on the side that has been tilted, but do not push the buckle into the circlip again);

6.Remove the airbag, pick out the yellow buckle behind the airbag, and then pull out the airbag plug and remove the airbag;

7.Pull out the socket of the coupling coil of the airbag in the upper part of the steering wheel;

8.Use the M12 spline to loosen the fixing bolt in the middle of the steering wheel counterclockwise;

9.Finally, carefully remove the steering wheel (take care to prevent the coupling coil underneath the coupling coil from turning unexpectedly).

Millions of car purchase subsidies.