The installation of the physical filter of the fish tank, how to install the filter on the side of t

There are many different shapes of filters on the aquarium market, but they are all included in the upper filter, built-in filter, bottom filter, external filter and biochemical cotton filter.

The filter media of the filtration system is set in the direction of the water flow, and the order of the filter media of the filtration system is as follows:

Water Inlet (Water Pump) Physical Filtration Chemical Filtration Biological Filtration (Water Pump) Water Outlet".

Physical filtration can be done with filter cotton (thickness).

Use the fibers in the filter cotton to block the insoluble impurities and waste in the water, and clean it regularly.

The specific operation steps for the installation of the filter on the fish tank side are as follows:

1. Thread the oxygen tube into the fish tank through the corner of the baffle.

2. Connect the bubble head at the outlet of the oxygen tube.

3. Put the filter bag directly into the fish tank.

4. Cover with filter cotton.

5. Install the filter pump, which is a suction cup and directly adsorbed on the glass.

6. Take out the oxygen pump.

7. Connect the oxygen pump to the other end of the oxygen tube.

8. The oxygen pump is placed on the top of the fish tank, and the side filter is installed.

As long as the filter material is placed on the fish tank side filter, the water pump can be used without special installation.

Fish tank side filtration is a kind of filtration method that uses part of the space on the side of the fish tank to separate the filter tank, and the advantage is that the scattered water pump, heating rod and other objects can be concentrated in the filter tank to make the main tank tidy. See image below

The side filter is usually divided into multiple compartments, as shown in the picture above, which is divided into three. The first few compartments are filter chambers, where various filter materials are placed, and the last compartment is the equipment room, where only water pumps and heating rods are placed. What to put in the filter material should be determined according to the feeding object.

If you are raising marine fish, there is also a water replenisher in the equipment room.

You can make it live, or you can make it integrated with the fish tank (not recommended), and if you make it active, you need 6 pieces of glass to stick it with 3mm glass in my way, and there should be a gap of about 5mm-10mm between the two glasses. The larger the opening of the first glass and the greater the drop between the two glasses, the greater the number of watts that need to be pumped. Take control of your pump choice.

The filter of the fish tank is important to ensure the health of the water quality. How to install the filter of the fish front acre tank? PChouse will take you to find out.

First of all, hold the outer frame of the filter with both hands, pay attention to its sealing gasket upwards, and do not collide with hard objects. Plug in the ventilation rubber tube above the built-in filter, pay attention to the power line as far away from the water surface as possible, or buy a sticky glass suction tip directly, you can fix the wire at the edge of the fish tank wall. Plug in the filter power and try it, if there are bubbles and no noise, it proves that the installation is complete.

The details are as follows:

1. Proper pump installation: forming a cycle, and being able to be cautious and not retain feces is the best way to detect.

2. The wattage of the pump is a little larger than the conventional one: the water absorption is large and the circulation is accelerated.

3. The filter cotton is thicker: it not only plays a filtering role but also serves as a nitrifying bacterium bed to achieve biological circulation.

In addition, many people use submersible pumps for aesthetic purposes. After buying, the outlet hose and its set of outlets should be connected to the water surface from the outlet located at the bottom of the tank, and then filtered from the filter box and flowed into the water to complete the water circulation. Take the plastic sheathed line pipe for electricians, cut it off according to the distance between the pump and the water surface, and connect the water outlet with a sheath wire elbow at a right angle.

In this way, the pipe occupies less space in the water, is welt, beautiful, and easy to scrub.

Abstract: Fish tank filter is one of the necessary devices in the fish tank or aquarium, pay attention to the correct installation method when installing, first choose the appropriate type of fish tank filter, and then choose the appropriate installation location, the specific installation location is different according to the fish tank configuration, the number of fish farming, after choosing the appropriate position, the fish tank filter is plugged into the tube to connect the submersible pump, connect the power supply, the wire is fixed on the side of the fish tank, and then plug in to try it. When installing the fish tank filter, it is necessary to pay attention to the combination method of the submersible pump and the filter, the position of the nozzle and the position of the pump.

Let's take a look at how to install the fish tank filter. 1. How to install the fish tank filter.

Fish farming first raises water, fish tank filter as a device in the fish tank to purify water and replenish oxygen, is very important, needs to be installed, so how to install the fish tank filter?

The installation method of the fish tank filter is: first hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, and do not collide with hard objects. Then plug in the ventilation rubber tube above the built-in filter, pay attention to the power line as far away from the water surface as possible, or buy a sticky glass suction tip directly, you can fix the wire at the edge of the fish tank wall.

Then plug in the filter power and try it, if there are air bubbles and no noise, the installation is complete.

2. What is the best position for the fish tank filter to be installed in the fish tank.

When installing the fish tank filter, the installation position of the fish tank filter is also a problem worth considering, if the installation position is not suitable, the filtration effect may not be good, so where is the fish tank filter installed?

Generally speaking, there is no fixed requirement for the location of the fish tank filter to be installed, and the position of different types of fish tank filters is also different, such as the upper filter is installed on the top of the fish tank or aquarium, the bottom filter is installed at the bottom of the water tank, and the built-in filter can be directly sunk in the water; As for the specific installation location, it is necessary to consider the shape and configuration of the fish tank or aquarium, as well as the situation of fish farming, and install it in a reasonable position according to the actual situation.

3. Precautions for installing fish tank filters.

1. Pay attention to the combination of submersible pump and filter.

The submersible pump and the fish tank filter are more beautiful, and the matching water outlet hose should be selected during installation, which is connected to the water surface from the slag outlet located at the bottom of the tank, and then filtered from the filter box and then flowed into the water to complete the water circulation.

2. The position of the nozzle should be appropriate.

When installing the fish tank filter, you should also consider the location of the water outlet, try to put the water outlet and water inlet on both sides of the fish tank, and the net of the water inlet should not be too high, and it is advisable to be close to the bottom of the tank.

3. Pay attention to the position of the pump.

The pump should be installed in a suitable position to ensure water circulation and not leave dirt such as fish feces. If you need more water absorption and circulation speed, you can consider choosing a pump with a higher wattage, and the filter can also be set thicker.

If the filter of the aquarium fish tank is not properly placed, the water in the fish tank will still be turbid, so how to install the filter is very important. Here are the two filter placement methods summarized for you, let's take a look.

First, the basic method.

1. The pump is properly installed --- form a cycle, and leaving no feces is the best test.

2. The wattage of the pump is a little larger than the conventional one--- the water absorption is large, and the circulation is accelerated, 3. The filter cotton is thicker--- which not only plays the role of filtration but also serves as a nitrifying bacterial bed to achieve biological circulation. I've seen a lot of pumps in fish tanks with high suction ports, so don't laugh at this method. In addition, I have encountered white fog in the new tank, and I have tried to change the water and add medicine, so it is better to adjust the pump and add a little water purification king, and there will be no more such things.

However, with the addition of water purification king, you must look at the filter material, and wash it in time if the water overflows.

Second, the cylinder aesthetic method.

In addition, many fish are raised with submersible pumps (filters). After buying, the outlet hose and its set of outlets should be connected to the water surface from the outlet located at the bottom of the tank, and then filtered through the filtration and flowed into the water to complete the water circulation. This hose is ugly in the water and dirty and hard to wash due to its softness and threads.

I have a solution: take the electrician's plastic sheathed wire pipe (hard, straight) (available in building materials stores) according to the distance between the pump and the water surface, and connect the water with a sheath wire elbow at a right angle. In this way, the pipe occupies less space in the water, is welt, beautiful, and easy to scrub.

Give it a try. If there is a surf port, two outlets can be connected to the filter with one in a tee.

When installing the fish code type mountain tank filter, try to put the water outlet and water inlet on both sides of the fish tank respectively, and the net of the water inlet is close to the bottom of the tank. The pump should be installed in such a way as to ensure that the water can be circulated.

The fish tank filter is a water purification and oxygen device used in fish farming appliances, its purpose is: to remove feces and other dirt in the water, to keep the water clear, sufficient oxygen, no harmful substances, no pollution, suitable for the growth of fish.

There are many types of filters, such as: gas lift biochemical cotton filter, bucket external filter, aquarium top filter, fish tank filter with shape, etc. The main filtration methods are: physical filtration, biological filtration, chemical filtration, etc.

The self-cleaning filter overcomes many shortcomings such as small dirt holding capacity of traditional filter products, easy to be clogged by dirt, the filter part needs to be disassembled and cleaned, and the filter status cannot be monitored, and has the function of filtering the raw water and automatically cleaning and sewing the filter element.

Advantages of fully automatic filters

The filtration area is large, the dirt holding capacity is high, and the user can customize it according to the actual working conditions. The cleaning method is simple, and the cleaning cycle is electronically monitored, which can realize automatic cleaning and sewage discharge. All parameters in the automatic self-cleaning filter control system can be adjusted, etc.

Stainless steel brush filter The types of stainless steel brush filter are: automatic stainless steel brush filter, hand-cranked stainless steel brush filter. Its main function is to remove the suspended solids in the water, reduce the concentration of suspended solids in the water, particulate matter, reduce turbidity, purify water quality, reduce system fouling, bacteria and algae, rust, and purify water quality.