Can you tile the living room wall? How do I avoid falling out?

The living room wall can be tiled to avoid falling off: generally speaking, when we decorate our own house, we expect the best quality of our own decoration house, so that in the case of interior decoration on the wall tiles, in fact, the quality is very guaranteed, the tiles are more hard, and special wear resistance, all of which are some good information that we must choose when decorating. And the tile is very comfortable in the summer, the appearance is particularly simple and generous, decades are not outdated, if you change to the wallpaper, you need to often change some new design style, but because the design style of the tile is very simple, so it has been fashionable.

The first option for wall tiles in the large living room is the glazed brick. That is also a commonly used choice plan scheme in the past, that is, the tiles selected for the wall of our large living room, which are the main wall tiles. This kind of tile refers to the general glaze tile.

The vast majority of glazed tiles belong to ceramic tiles, which have a relatively high water absorption capacity. The surface has a layer of glaze, and it also has the characteristics of waterproof, stain resistance and cleaning resistance. Therefore, it is very suitable for use on walls.

If there are quicklime powder, wall paint, wallpaper and other decorations on the wall, or there is waste on the ground, it must be cleaned up, otherwise the mixed mortar and the rural base are not firmly bonded. If there are gaps in the wall itself, they should be properly disposed of before tiling.

Wall tiles should be soaked sufficiently: due to the high moisture content of wall tiles, it is important to take this property into account when attaching. Before tiling, it should be completely watered and damp, otherwise the moisture in the cement mortar will be quickly digested and absorbed by the dried bottom layer and the tile and solidify quickly, which will directly affect its bonding color fastness.

Otherwise, the wall tiles absorb water from the concrete, so that the concrete cannot have the effect of adhesive. The floor tiles should be scraped first: the uncoated concrete floor tiles should be laid on the ground, and after being knocked flat, the cement mortar should be coated with the floor tiles and paved on the road surface, and the diagonal parts of the four bricks should be level.

The wall of the living room can also be tiled, but there are pros and cons to tiles, and the advantages are convenient to take care of, while the B-end is too cold and cold, which will give people a not very warm feeling; First of all, the tiles should be soaked in more water, and if they are soaked in water, they should be soaked full, and there is to clean up the base layer before tiling, and then they should be tiled.

Yes, you must soak the tiles with water in advance when pasting tiles, and then you can use the tile adhesive, so that the tiles will be particularly firm.

It is possible to paste tiles, you need to pay attention to not leaving too many gaps in the middle of the tiles, and to carry out beautiful seams, the tiles should be relatively strong.

I think it's possible to put tiles. Be careful not to stick too close to each other. You can leave some beautiful seams. It's better to choose a square one.

I think the wall of the living room can also be tiled, but for the overall effect, it is better not to put tiles; When choosing tiles, be sure to pay attention to their quality, but also pay attention to the overall color and **.

Of course, you can, be sure to choose light-colored stone bricks, so as to improve the overall brightness, and it will not look particularly large.

Tiles can be pasted on the living room wall, and the effect of pasting: the ceramic tile TV background wall is the shining point of the living room design, which can reflect the owner's hobbies and artistic accomplishments, so how to choose the TV wall and material content is particularly important. A tile video wall can help you solve this problem.

If the interior decoration is good, the level of the house seems to have improved a lot. Mr. Sun can choose too many types of graphics, and he can choose the pattern of the tile TV background wall according to the style he likes. For example, cultural integration style, European regional style, non-mainstream girl style, etc.

Choose large living room wall tiles, and the imitation tiles of family tiles are imported from abroad. It has anti-slip and anti-wear properties on the ground. It is a very good choice for a home with elderly people and children, or a home environment with a European style decoration.

In addition, when tiling imitation tiles, there is no need to deliberately distinguish the color of the tiles. The process characteristics of imitation bricks are that there are several different colors and concave and convex surfaces in a box of bricks. In this way, according to the combination of a variety of colors and concave lines, it can achieve the actual effect of personalized tiling full of natural atmosphere and fashion trends.

Attention to wall tiling: if there is a small white on the wall of the initial living room, after removing the small white, it is also necessary to use equipment to polish the residual white that penetrates into the wall body, and at the same time has the initial wall to grind into a sand surface, and at the same time the impact drill is used to carry out all-round care on the wall, which is beneficial to the wall tile bonding, after the grinding and polishing is completed, it is proposed to use a high-pressure water pump to clean the wall floating layer until it is dried, and then carry out the wall solid rolling paint of the wall.

If the wall tile is a processing brick, then the tile should be carried out before the self-adhesive rolling paint of the tile, the use of special balance cement to pave the paving, if it is a general porcelain tile brick, it is proposed to make tea work in time, and leak adhesive when paving. In the end, when the living room wall is tiled, it is proposed not to pave the beam, because it is very easy to fall, there is a risk, if you really want to paste, it is to implement the construction technology of wet hanging with copper wire, to ensure that the tiles under the beam are not easy to fall.

It can be tiled, the effect is very bright, and the home will be particularly advanced, but there will be a cold feeling, not warm at all.

It is possible to apply tiles, but the effect is a bit cold, not warm at all, and will make the home feel very cold.

In fact, the wall of the living room can also be tiled, but the effect of pasting is not particularly good, and it is better to paste wallpaper.

Yes, but most people don't do that. It's not particularly good, it looks very cold, and it's more like a hotel.

Tile adhesive: In the case of pasting tiles, it is impossible to choose the tile adhesive with the right tile materialTile adhesive, mixed powder raw materials, quartz sand inside, through the selection, water cleaning, drying and other processes, high-quality concrete, other auxiliary raw materials, mixed production and processing of machinery and equipment, before the construction of the project, poured into the plastic tank, only the appropriate amount of water must be added, stirred evenly can be constructed. Traditional mixed mortar renewal products, mainly used in difficult interior decoration paste tiles.

Tile material type: In the case of home decoration, we all understand the high-grade air of ceramic tiles, improve the actual effect of the overall decoration, and make people feel bright. But it is not clear that the tile material is not the same, paste wall tiles, in fact, it is a tile, the specifications are small and slightly thinner, the surface of the tile is not hygroscopic, the bottom of the billet water absorption flow is very high, the floor tile specifications are large, and the relative density is particularly good, the floor tile on the reverse side of the tiny small round hole is not, so the floor tile is not hygroscopic, naturally, the interior decoration paste tile improves many difficulty factors, especially on the floor tile wall is not easy to paste.

Wall quality assessment, that is, we want to paste the quality of the tile wall, because the wall must be pasted with wall tiles, the wall mixed mortar is loose, there is no stronger adhesion to the pasting tiles, it is very easy to fall off the bricks, according to the total area of the bonded wall tiles, we must carry out a quality assessment, find that there are cracks or loose parts, according to the size of the range to decide the solution later, so that the probability of falling off the tile can be reduced at a greater level. The position of the relative density of the bottom layer of the wall is good, and the key is used to scratch twice on the top to determine the quality of the bottom layer of the wall. With everyone's mastery of ceramic tiles, it can be roughly divided into two types, one is sandy bricks, and the other is stone bricks.

Clay bricks are tiles that must be paved by soaking in water, while stone tiles are tiles that are not necessary to be soaked in water.

The alias for sand bricks here is ceramic tiles or wall tiles, and stone bricks refer to floor tile series products. These two kinds of billet tiles can be directly paved with concrete according to the previous traditional paving processing technology, the tiles that must be soaked in water are used for wall decoration, and the tiles that are soaked in excess of water are used for pavement decoration design. The product quality of tile adhesive, that is to say, the quality of the tile adhesive you order is not qualified.

In addition, tile adhesive is not within the standard shelf life. Only the tile adhesive that is qualified in quality and within the warranty period can be pasted with tiles, otherwise there may be a problem of falling bricks. We ordered tile adhesive with qualified quality and within the warranty period.

Subsequently, we should mix the tile adhesive evenly in accordance with the application regulations of the tile adhesive, and then apply the evenly mixed tile adhesive to paste the tiles. In this case, it is not easy to cause the brick to fall due to the quality of the tile adhesive.

I think it is also possible to fall off the bricks, so pay attention to polishing in advance; The wall should be polished with cement in advance to avoid hollowing and other situations, and the glue and the wall should be fully bonded to remove the bubbles inside.

If it is a regular product to buy, the quality of the glue tile will not fall, we must choose a regular brand when sticking the bolt, choose a good master.

This situation will occur, so when pasting tiles, it is better to choose a glue with relatively large adhesiveness.

If you can pay attention to the following points when pasting tiles, the chance of falling off after pasting will be greatly reduced.

1. Pay attention to clean the base layer before tiling to reduce the possibility of dust on the wall as much as possible.

2. The moisture content of the wall should not be too low, that is, the wall should not be too dry and dry.

3. If the wall (foundation surface) is relatively smooth, it should be painted with an interface agent before pasting tiles.

4. The glazed bricks must be fully soaked in water, and then taken out and drained before pasting.

5. Pay attention to check whether the cement (or finished binder) is expired.

How to paste tiles are not easy to fall off, paste tiles, pay attention to the cleaning of tiles, and the cement humidity of the wall and the viscosity of the glue, Sumei Jijia for this aspect of the choice, ultra-long drying time, anti-slip, strong adhesion, good water resistance, can resist a certain deformation, excellent freeze-thaw resistance, convenient construction, non-toxic and odorless in line with EU standards: EN 12004:2001C1TE type.

The cement is good and the paste is firm.

Because the tiles are getting better and better, the water absorption rate is constantly decreasing, and the traditional cement river sand can no longer meet the requirements of the tiles, and the size of the tiles is getting larger and larger, so it is more difficult to stick, so it is recommended to use professional bonding materials, such as porcelain stickers to paste tiles.

Porcelain sticker knotted tile, strong bonding force, no hollowing, no bricks, no slippage, water and moisture resistance, and the construction is very simple omitted the traditional wet wall, dipping bricks, fixing and other steps, the construction is simple to add water to mix it, so it is a very practical bonding material.

1. Liquidate the base layer before tiling.

If there are cement paste, latex paint, wallpaper and other whitewashes on the wall, or there is dirt in the sky, it must be liquidated and pickled, or the lime mortar is not firmly bonded with the base layer; In addition, if there are cracks in the wall itself, it should be properly solved before tiling, so as not to cause cracking or scattering of wall tiles due to the enlargement of the fundamental structural cracks in the future; In addition, for the sky and wall with too much difference in flatness or verticality, it is necessary to use lime mortar to stop leveling. Before paving, it is necessary to compare the color difference of the tiles.

2. The wall tiles should be sufficiently soaked in water.

Due to the high moisture content of wall tiles, it is necessary to consider this characteristic when pasting. Before tiling, the base layer should be sufficiently watered and moist, otherwise, the moisture in the mortar will be quickly attracted by the dry base and the tile and quickly coagulate, which will reflect its bonding fastness. Otherwise, the wall tiles will attract moisture from the lime, so that the lime will helplessly act as a paste.

3. Paving tiles should first pave the sky.

The unlimeed floor tiles are laid in the sky, and after being knocked out, the lime mortar is applied to the floor tiles and spread in the sky, so that the opposite corners of the four bricks are flush. And the order of the building is also exquisite. If the sky has a slope or a floor drain, pay attention to finding the slope according to the drainage location; The wall tiles should be paved from the bottom up, and for the sake of beauty, the bottom bricks should be pasted back.

After the wall tiles are pasted, press the floor tiles. In addition, a wall could not be attached to the top at one time, in case the tile had a large weight and caused it to collapse. After laying the floor tiles, there is no need to step on them for a long time.

Now the tiles, because the tiles are getting better and better, so the water absorption rate is constantly decreasing, the traditional cement river sand can no longer meet the requirements of the tiles, and the size of the tiles is getting larger and larger, so it is more difficult to stick, so it is recommended to use professional knot materials, such as porcelain stickers to paste tiles.

Porcelain sticker is a special tile bonding material, so there is no need for wet walls, bubble bricks, supports and other steps, as long as you follow the following construction methods to do it.

1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.

3. Knead the tiles on the top during the drying time.