Install the door cover or the sill stone first?

Do waterproofing first, and water may seep out in the gaps of the threshold stone if the threshold stone is installed later, it is recommended to do a waterproof treatment along the side seams of the threshold stone.

The first door is blocked. But you have to know the height of your door first, and if you don't feel good about the door can't be put in, you tell the height of the mason's door when you press it.

Home decoration will be installed on the threshold stone, so why install the threshold stone, decoration first install the threshold stone or door, there are many people on this concept is not too clear, let's take a look at it.

1. Why install threshold stones?

The sill stone protects against moisture and prevents the floor from arching. The sill stones in the bathroom and kitchen also have the function of preventing water from flowing outside. If there is no threshold stone, the floor of the bathroom and kitchen will be lowered, which will form a height difference with the living room, which is not only visually unsightly, but also causes inconvenience to life.

Second, when decorating, install the threshold stone or the door first.

1. In the decoration, it is generally the threshold stone that is pasted by the bricklayer first. When you need to make the door, coordinate the time with the merchant who measures the door in advance, and generally try to arrange the time when the carpenter is present. Only by setting the threshold stone first and doing it well, can we ensure that the size of the door is as accurate as possible and better measure the size of the door.

2. Under normal circumstances, the decoration order is to repent: first measure the door - install the sill stone - ground leveling - install the door - install the wooden floor. Install the sill stone, the vertical plate of the door stands directly on the stone, so that the stone can play an isolated role on the door and the wet ground, if the door is installed first, the closing of the interface between the stone and the door vertical plate is not easy to deal with.

Another point to note is that when installing, pay attention to the level of the door opening and door sleeve and the hammer line.

The above is why the threshold stone should be installed, the whole content of the threshold stone or the door is installed first when decorating, I hope it can help you understand the relevant knowledge of the installation of the threshold stone and the door, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention.

The threshold stone is also called the door stone. Many owners do not know the role of the threshold stone, and even many owners do not install the threshold stone, in fact, the threshold stone is not "useless", and the choice of style and material can also become a bright presence in the home. Today, I will bring you what situation to install the threshold stone, and what materials are used for the threshold stone, let's take a look.

What is the case to install the sill stone

1. The living room is tiled, and the dining room is floored.

Not limited to the living room and dining room, the floor of the two connecting rooms is paved with different materials, and the threshold stone is needed to connect, which is easier for the master to construct when he closes the mouth.

2. There is a height difference on the ground.

For example, if you need to plaster cement mortar when laying tiles, there is a height difference between the ground and the laminate floor, you need a sill stone to adjust, and make a chamfer on the low side of the ground, and the rounded corners and bevels can be.

3. Water retention. This is the beginning of the bathroom must be installed, especially the bathroom without dry and wet separation, at the door to install a door sock sill stone a little higher than the ground, can prevent water from overflowing, kitchen and balcony are also installed.

What material is good for threshold stone

There are many materials that can be used as sill stones, but they can be roughly divided into three categories: tile, granite, and marble.

1. Tiles. Ceramic tile is a relatively thin material, the ceramic tile is cheap but its service life is relatively short, easy to break, in feng shui on the threshold stone fracture is taboo, so the use of ceramic tile users is not very many.

2. Granite.

The choice is wider, it is very suitable to use granite to decorate a house with a small area, if it is a large house, it is not recommended to use, and the complex pattern of granite is not suitable for the atmosphere of a large house.

3. Marble.

Marble is a kind of stone widely used in many threshold stones, marble is mostly natural materials, its wear resistance and service life are better, and the gorgeous texture of marble is not comparable to many stones, so for the question of what stone is good for threshold stone, marble is a good answer, but the ** of high-quality marble is generally relatively high, which is also its main disadvantage.

That's all there is to it".What is the best material to use for the sill stone to install the sill stone?

Install the door stone first, and then install the door cover, so that it is a whole.

If you install the door sleeve first, and then install the door stone, it can be theoretically possible, but it is difficult to construct.

Install the door stone first, because there should be a 5 mm gap between the bottom end of the door sleeve and the door stone, which can be moisture-proof and deformation-proof! If you install the door cover first, the gap will be difficult to grasp!

The decoration of the new house, the door cover, and the balcony pass are all necessary to wrap the bathroom du door cover inside the door cover does not need to be packaged, only the outside is only wrapped outside, and the door cover is also wrapped inside, if the time is long, because the moisture of the bathroom is not very good.

The procedure of decoration is to go first, water, electricity and heating - in the carpentry and ceiling engineering - wall and floor tiles - batch putty - paint - latex paint|- Do a thorough cleaning. To add, after pasting the wall tiles, you can customize the cabinets and sanitary ware. During the renovation period, you can go and see the lamps and furniture.

There is a point that you need to understand the market before renovating, so that you will save a lot of money.

The living room uses large vitrified tiles, and white can make the room appear bright, but the problem of black joints is more serious. It is recommended to use some.

The version is darker in color, but also.

The floor of the living room is up to you.

I have a hobby! You can choose matte non-reflective and non-slippery, if you have money in the bedroom, you can lay zhi solid wood flooring, no money dao pave composite wood flooring, the door cover for entering the door should be done, and the consequences of not doing it will help the door side after brushing the wall and changing shoes, and it will be black after a long time, unless you can think of a better way, and then there will be no overall effect will not look good.

The living room floor tiles are made of vitrified bricks, which can prevent penetration. The bedroom is painted with a floor, which is durable and can be matched in any color.