What are the benefits of surface mounted radiators?

First, the temperature rises quickly

Compared with floor heating, the heating of the radiator is very fast, and the radiator will be hot in ten minutes after being turned on at the earliest, and the temperature in the room can be warmed in one or two hours. Floor heating, on the other hand, can heat up in three or four hours at the earliest, but it usually takes two to three days to warm the whole house.

Second, the installation investment is low

Take a 120-square-meter, four-bedroom house as an example, install radiators, the lowest is 10,000 20,000 yuan; Installation of floor heating, the highest in 20,000 30,000 yuan, if you buy a better wall-hung boiler, ** higher than about 10,000 yuan. Surface-mounted radiators, only radiators, pipes, and wall-hung boilers are required. Floor heating, on the other hand, requires insulation panels, reflective films, coils, silicon crystal mesh, water separators, wall-hung boilers, and cement protective layers.

Compared with this series, the cost of radiators is lower than that of floor heating.

3. Do not occupy the height of the floor

Radiators are usually installed by the window or against the wall. So it does not occupy the floor height of the room. Floor heating, whether it is dry or wet, will occupy at least 7 8 cm in height, after the ceiling, the floor height will be lower, and the high living will be more depressing.

Fourth, easy maintenance

The radiator is installed in the open place, and if there is a water leak or a broken situation, it can be repaired directly. And floor heating, if the water separator and wall-hung boiler are broken, it can also be repaired directly, but if the coil leaks, etc., it will be more troublesome to repair, because the coil is buried in the backfill layer.

Fifth, baking function

The radiator has its own baking function, and it is difficult to dry the clothes and socks washed in winter.

Radiator, a modern heating device favored by consumers. Most people only know that radiators can be surface-mounted, but they don't know why they should choose surface-mounted. So, what are the principles and benefits of surface-mounted radiators?

Let's follow the golden flagship flag brother to find out.

First, the principle. Usually what we call radiator refers to water heating, that is, the use of radiators or boilers to heat circulating water, and then connected to the radiator through the pipe, and then output a suitable temperature through the radiator to form an indoor temperature difference, and the post-heat cycle makes the temperature of the whole room rise uniformly. Heating is the water treated by the heating water treatment equipment in the heating equipment (boiler) so that it evaporates, and the evaporated water vapor is passed through the radiator to heat the room.

Because the house has been decorated and the floor has been leveled, it is impossible to destroy the decoration to open the floor, so it is not possible to do indoor underfloor heating, and can only use radiators to install on the wall heating method - radiators surface-mounted.

Second, the advantages of surface installation.

1. The heating effect is good and the heating is fast.

The open installation method makes the radiators and pipes directly exposed to the room, so that the heat is unobstructed and the heating effect is better. When you need to heat your home, open the radiator valve directly and use it directly, no need to wait, saving time.

2. Do not destroy the decoration.

Open radiators do not need to damage the ground, do not need to groove in the wall, just lay heating pipes, baseboards, ceilings and other hidden places on the wall, and will not damage the original home decoration. The European mainstream steel plate radiator not only has good performance, but also has a beautiful appearance, which is perfectly combined with family life.

3. Independent control.

Each room in which the radiator is installed can be controlled individually without interfering with each other, ensuring the heating effect. It is easy to operate and can be operated by both the elderly and children. At the same time, this kind of room control is also relatively energy-efficient.

4. The construction period is short, the construction is fast, and the installation is convenient.

During the construction process, professional rhinestones are used, dust-free construction, which can be completed in one day. It saves a lot of users' worries and troubles, and hardly affects the normal life of users, going out during the day and going home at night to enjoy the warmth of home.

5. Simple maintenance.

Under normal circumstances, the failure rate of open heating systems is low. Even if there is a small problem, since all the pipes of the open radiator are exposed indoors, it is easy to find the key to the problem without digging the wall in the later maintenance and maintenance, which is conducive to the later maintenance.

3. Installation steps of surface-mounted heating.

1. The route of the pipeline should be determined according to the pre-designed installation position when laying the pipeline. Pipe wiring is generally located in hidden places such as ceilings and baseboards. Try not to disturb the interior decoration or take up too much space.

2. When installing the radiator, the radiator should be placed smoothly, and measured with a level to see if the installation is stable, and then connect the valve connector with the inlet and outlet valves. After checking correctly, reinforce with pipe wrench.

3. The installation of radiators should pay attention to the isolation from the open wire and electrical equipment, and no flammable and explosive materials should be placed around. Specifically, the radiator should be more than 750px away from the gas meter and gas stove.

4. The pressure test and acceptance construction personnel have no running, rising, leaking, dripping and other phenomena in the pipeline stamping test, and can be accepted after being checked and confirmed by the customer.

At present, it is the peak season for decoration, and the heating system will be installed at the same time during the decoration, and the surface-mounted radiator is now a more popular radiator installation method. Let's take a look!

It is conducive to the thermal convection of the air in the room, and the room temperature rises rapidly. Radiator heating uses the basic principle of hot air, which first heats the air around it, and then the hot air rises, and the air around it will be filled, heated and raised again, and the cycle repeats itself, so that the air of the whole house is heated up, so as to achieve the purpose of raising the indoor temperature and completing the heating. If the radiator is placed under the window, it can produce air heat convection well, and if it is installed in a relatively high area, it can not produce heat convection under the radiator, which may seriously affect the actual effect of heat conduction.

Because the radiator is close to the road surface, it can make all the slow heat convection of the indoor air, so that the air in every corner of the house can be heated in a balanced manner, so the heating method is relatively gentle, and it is not easy to produce a feeling of light breeze in the room, but it brings a warm feeling to people and makes people feel comfortable.

From the perspective of indoor layout, it is not easy to use the lower or surrounding of the window to lay out furniture, decorations, etc., and most of them will be solved by blank art, so it is not easy to hinder the layout of home decoration by assembling radiators in such places, and in turn, the radiators are fashionable and trendy in appearance, and the colors are bright, and they can also be used to decorate indoor air and improve the aesthetics of home furniture.

In winter, the window is one of the areas where the cold air from the outside is relatively easy to enter and exit, and the radiator installed under or on the side of the window can easily heat this cold air, and will not make the body feel that there is too much cold air entering, which has the effect of preventing cold. Buying radiators doesn't require too much effort, just three tricks, and you can get it.

Look at "the appearance of the radiator spray paint." This is also the first trick of the user after purchasing the radiator, choosing the radiator, to inquire about the surface painting. See whether the surface paint is smooth, whether the color is authentic, whether it is smooth and delicate.

This is all to confirm that the brand is not environmentally friendly or high in quality in the selection of raw materials.

Touch the "radiator surface spot welding" This is also the second trick of the user after purchasing the radiator, when choosing the radiator, to touch the surface spot welding, is not significant, is not smooth. This is very important because it is necessary to determine whether there is water seepage and other root causes of various conditions in the middle and late stages of radiator use, and to find solutions to problems as early as possible.

Weigh the radiators. This is also the third trick of the user after purchasing a radiator, when choosing a radiator, you should weigh the radiator. In order to avoid shoddy stores, it is also an unexpected problem to control the irator in the middle and late use.

The radiator is highly efficient and easy to use, making it ideal for home installation. With a radiator, children can jump around indoors freely, and parents don't have to worry about their children kicking the quilt and catching a cold when they sleep at night; Radiators are installed to relieve the pain of the elderly with cold legs, and it is more comfortable to live a pure life; Radiators are installed to help dry laundry.

Surface-mounted heating and vertical blades can generally achieve better heating results, and it is also easier to reduce later maintenance. During the installation process, it is necessary to select the appropriate mold-resistant material. Find a professional worker to carry out the renovation.

Doing so should save some money, and the heating will be better, and it is better to choose a big brand that is cost-effective.

In short, the advantages of Mingyin fiber radiator are Fengqing imitation: the installation environment is diversified, even if it is a house that has been renovated, it can be installed.

Disadvantages: The pipes of the surface-mounted radiators are exposed to the outside of the wall, which may be a little unsightly.

Surface-mounted heating also does not need to damage the ground, no need to groove in the wall, just lay the heating pipe on the wall, ceiling, etc., so it will not cause damage to the original home decoration. Because radiator heating uses the principle of hot air, the indoor air is heated through the heat continuously emitted by the radiator to achieve the purpose of heating. The surface-mounted installation method exposes the radiators and pipes directly to the outside, allowing the heat to dissipate unimpeded, and the heating effect is better.

If the heating is installed in the north, the advantages include that it can be dismantled at any time if it is found to be leaking or malfunctioning.

First, easy installation: the installation period of radiators is short, and the radiators can be completed in 3 to 5 days. During construction, the staff often covers the household items as necessary to prevent the dust generated by the punching from staining the furniture, appliances, etc.

Due to the short construction time, the construction is only carried out in a small area, so it will generally not affect the normal life of users. Industry insiders pointed out that the heating installation is good to choose during the non-heating period.

Second, do not destroy the home decoration: the surface-mounted radiator does not need to destroy the ground, does not need to groove the wall, but only lays the heating pipe on the wall, ceiling, etc., so it will not cause damage to the original home decoration. Now people pay more attention to the high style of the room, in the installation of radiators will use well-known brands of radiators and pipes, these products not only have good performance, but also beautiful appearance, especially the modern new radiators, can be well integrated into the home decoration, become a fashionable decoration in the home.

Third, the heating effect is good: in fact, surface-mounted radiator heating is better than concealed installation. We all know that radiator heating uses the principle of hot air, and the indoor air is heated through the heat continuously emitted by the radiator to achieve the purpose of heating.

If the radiators and pipes are blocked, it will affect the heat dissipation, which will also affect the heating effect. However, the surface-mounted installation method exposes the radiators and pipes directly to the outside, allowing the heat to dissipate unimpeded, resulting in better heating results.

Fourth, easy maintenance: because all the pipes of the surface-mounted radiator are exposed indoors, in the later maintenance and repair, there is no need to chisel the wall and break the wall, that is, the crux of the problem can be easily found, which is conducive to the later maintenance and maintenance.

1. Since the radiator pipe is visible, it still has a certain impact on the aesthetics of the room.

2. Secondly, the surface-mounted radiator needs to pass through the wall due to the need for the pipe to be punched in the wall, which will also cause certain damage to the wall of the decoration.

3. For users who use surface-mounted radiators indoors, they must let experienced masters design them, so as not to judge that the hand grip has a greater impact on the aesthetics of the interior.

4. The larger the house, the more difficult it is to dig the pipeline, and the general small apartment surface-mounted radiator is very well designed and piped.

The benefits of surface-mounted radiators are:

1. The installation time is relatively short, because the installation of pipelines and radiators on the decoration surface is simpler in terms of design, and it will not take a lot of time to measure, nor will it destroy the original decoration style, so it saves time and effort in installation, and basically can be installed and debugged in two to three days.

2. Surface-mounted radiators are beautiful and generous, with the continuous upgrading of surface-mounted radiator products and technologies, the radiators on the market are becoming more and more beautiful, and can be used as decorations, and some radiators are designed like a work of art, which can not only greatly exert its heating effect when placed at home, but also greatly increase the beauty of the room and add more points to the decoration of the house.

3. It is more safe and reliable, the whole heating system is completed on the appearance of the decoration materials, which is more convenient and faster in terms of debugging and maintenance, and once the pipeline is corroded, leaking, broken, etc., it can be quickly perceived, and the overall decoration does not have to be destroyed in the process of repair and disassembly, and it can be disassembled and replaced directly, which is not only safe, but also very convenient.

The disadvantages of surface-mounted radiators are:

1. Blackened wall: After the radiator is used for a period of time, the surrounding wall will be blackened, which will affect the beauty of the home, but now the new copper-aluminum composite radiator has an anti-smoked wall design, which can avoid the wall being blackened by a certain degree of radiator.

2. Poor comfort: The temperature of the radiator rises very quickly, but the comfort is slightly worse than that of floor heating.

3. Uneven heating: the radiator is not like floor heating, the temperature of the house surface is the same, the heating temperature of the radiator is uneven, the closer to the temperature, the higher the temperature, if it is far away, it will not be warm.