What is heating into the wall and can the heating pipe walk in the wall

Updated on home 2024-07-13
8 answers
  1. Anonymous users2024-02-12

    Heating into the wall is also the heating pipe into the wall, which means that the radiator is designed inside the wall, and decorations such as blinds are installed during decoration, which is both beautiful and does not take up space.

    It means that the radiator is wrapped in the wall, and a large part of the heat will be lost in the wall. Even if the radiator is wrapped in the decoration layer outside the wall, there is more than 30% heat loss, especially when using self-heating equipment (own boiler, non-central heating) The heat loss is large, which will seriously waste energy and cause the use fee to be too high.

    The room at home is small, and when it comes to the renovation of the bathroom, for a house of 10,000 yuan per square meter, the radiator into the wall is equivalent to saving one square meter.

  2. Anonymous users2024-02-11

    Hello, you're talking about heating on the wall, right? It refers to the heating on the wall, which refers to replacing the short heating with a new type of long heating and hanging it on the wall, after all, it looks good.

    Or what you are saying is that the heating into the wall means that the heating is slotted in the wall by the dark pipe, and the heating cannot be installed in the wall to affect the heat dissipation.

    Beijing Rishang Colorful Radiator Copyright 010-59354545 I hope mine can be helpful to you.

  3. Anonymous users2024-02-10

    It means that the radiator is designed on the inside of the wall, and the decoration is equipped with blinds and other decorations, which are both beautiful and do not take up space.

  4. Anonymous users2024-02-09

    The installation of heating into the wall means that the water inlet and outlet pipes connected to the heating are walked into the wall, which will not affect the appearance and the floor in the future.

  5. Anonymous users2024-02-08

    Yes, but if you need to repair it, it's very troublesome, my family's wedding fashion is in the wall, and now there is a little water seepage downstairs, so it's all replaced, and the open pipe is replaced, and the eyes are re-drilled, which is very troublesome. Think about how you can pretend to be okay and think about it.

  6. Anonymous users2024-02-07

    Residential.

    Heating bai sheet is the owner of the purchase of the property.

    As long as the house is private property, the heater in the house should be contained.

    to private property.

    However, the pipeline should be said separately, and the pipeline that belongs to the upper and lower floors or the left and right neighbors is a public facility; The part of the pipe that is dedicated to the exclusive use of the home belongs to the private property of the owner.

  7. Anonymous users2024-02-06

    It is advisable not to go inside the walls, as factors such as repairs, water leaks, etc., should be considered.

  8. Anonymous users2024-02-05

    Compared with underfloor heating, wall heating is also one of the more common forms of heating. However, what is wall heating? Let's take a look.

    Wall heating is a heating equipment that has only been developed in recent years, but in terms of heating methods, wall heating and radiator heating methods are one system. Wall heating originated in some European and American countries, it is the use of low-temperature hot water and electric heating materials for heating, the main dissipation is to use the wall as a radiant surface, and then release mild radiant heat, so as to achieve the heating effect of warming the room.

    Nowadays, most of the carbon crystal wall heating is used on the market. The carbon crystal wall is small and thin, and does not occupy the space of the first bridge of the room. The thickness is about 1 cm, which not only does not occupy the indoor area, but also plays a certain role in beautification.

    The carbon crystal wall heats up quickly, and the heating effect can be achieved in 1 minute. Installation is also simple.

Related questions
12 answers2024-07-13

1. How to deal with water leakage in heating pipes?

When there is a leak in the heating pipe, it is necessary to find out the cause and take corresponding measures according to the cause, as follows: >>>More

5 answers2024-07-13

When arranging the system supervisor, it should be coordinated with the use requirements of the building, the heating system schema, and the layout of radiators. It is necessary to strive to save pipes and facilitate installation and maintenance. Supervisors are generally exposed to the surface. When the supervisor is exposed, it should be arranged in the corner of the external wall and the wall between the windows as far as possible. >>>More

7 answers2024-07-13

Single-tube series The characteristics of single-tube series connection are low material usage, relatively weak labor intensity, and shorter transformation time. The water of the whole system passes through the first set of radiators of the system, then the second group, then the third group ......, so the water temperature is gradually decreasing in the order of series. Under the same conditions, the temperature of the first and last two groups of heating to the room can be more than 2 degrees, in order to adjust the water temperature of a single group of heating, a bypass valve must be added at the inlet and outlet of the radiator front, some use a three-way regulating valve, and some use three gate valves. >>>More

19 answers2024-07-13

During the heating season, radiators.

The central tube is full of water, so it is normal to have occasional water flow sounds, but if the water flow is too loud, then there may be several situations. >>>More

12 answers2024-07-13

Heating pipe leakage can be used all-purpose glue to paste the leakage, because this glue has good waterproofness, belongs to the solvent type of glue, not only can be used for building decoration, but also can be used in hardware maintenance. Whether it is a hard material or a soft material, it can be used to paste, such as wood, metal, plastic, leather, etc. >>>More