Handmade paper flower production steps are explained in detail, and the handmade paper flower produc

Handicrafts. It is also very widely circulated in society, such as tattoos, carved portraits and so on! With the development of society, people are also making continuous progress, and now children are beginning to think about making a beautiful little flower for their mother.

Many of them buy all kinds of handmade flowers online, in fact, it makes more sense to make one! Let's teach you a few ways to make paper flowers!

How to make roses:

1. Glue a small iron wire between two pieces of green paper and cut it into the shape of a leaf.

2. Combine a large leaf with two small leaves.

3. Wrap a paper towel on the wire to form a droplet-shaped flower bud.

4. Cut ten petals, and use the back of scissors to roll the edge of the upper part of each petal.

5. Paste the first layer of three petals around the bud in turn, the three petals of the second layer and the first layer should be staggered, and the last layer should be pasted with four petals.

6. Cut the calyx.

Place the calyx on the base of the flower.

7. Tie two sets of leaves to the flower stalk with green tape to complete a rose.

Finish. How to make paper flowers with ribbons:

Tool; Ribbon paper, scissors, glue.

1;Prepare a number of various streamers.

2. Choose some tools for making ribbons.

3. Cut the ribbon into different sizes.

4. Pinch both sides to fold out a small triangle, and then fold another small triangle on the opposite side.

5. Repeat the above action and make a few more of these boat-like petals.

6. Stack the petals to look like a flower, and then fix the center point with a stapler or glue or needle and thread.

How to make beautiful cloth flowers:

Tool; Various colors of cloth, scissors, needles and threads.

1. Use scissors to cut into the basic shape of the flower, which may not be cut well at the beginning, so it is recommended that you cut more flower discs.

2. Sew the flowers and leaves together with a needle and thread, one flower has two leaves, this is just the most basic model, and you can also use your imagination.

3. Continue to design the flower model, take the step as the model, continue to add, this step needs to sew the flower independently in advance, and sew it on the leaf in two or three.

Paper flowers can not stick to water, what if there is dust on the paper flowers for a long time? A hair dryer is available.

Blow away, it is best not to put it in the sun, and generally put it indoors in a place where the sun does not shine. Because of the relationship over time, the color of the paper flower will fade a little, but color spray is often used.

With a gentle spray, this minor problem should be avoided.

Although there are a lot of gifts in the store, it is more meaningful and valuable to make a rose for your girlfriend and wife. The above introduces the method of making roses, and it is a good choice to make a rose to surprise your girlfriend and wife when you have nothing to do! You have to choose the materials, use your imagination, and come up with an idea before you can start your own handmade works, and children can do it under the guidance of parents or teachers.

How to make handmade paper flowers Fold the square paper in half along the diagonal once to form a triangle, fold the acute angle of the triangle in half in the right angle, and then fold it in half respectively, after pressing, the left and right sides form two small triangles, and use glue to align the two small triangles and glue them into a petal of the flower. Fold four more petals in the same process and glue them together to make a simple handmade paper flower. The details are as follows:

Step 1: Prepare 5 pieces of square paper of the same size, take one of the square sheets as an example.

Step 2: Fold in half diagonally to form a triangle.

Step 3: Fold the two acute angles of the triangle in half along the middle line in the direction of the right angle.

Step 4: Align the small triangles on the left and right sides along the sides of the small squares and fold them outward.

Step 5: Flatten the active triangle along the crease.

Step 6: Fold the small triangle that protrudes from the square inward.

Step 7: Fold the flattened triangle symmetrically.

Step 8: Apply glue to the small triangle on the left.

Step 9: Align the small triangle on the right with the small triangle on the left and stick it firmly to form one petal of the flower.

Step 10: Fold the remaining four parts of the flower out of the other 4 pieces of paper in the same way, and apply glue at the position of each petal joint.

Step 11, glue 5 petals together in turn, and a beautiful and simple handmade paper flower is folded.

Precautions: 1. In order to ensure the curvature of the petals, the single petal after folding can not be pressed hard, and the small triangles on both sides can be gently glued. 2. This paper flower folding method is simple, but it also requires enough patience, and you should be careful when folding paper to prevent damaging the paper.

3. You can fold more, fix it with a small wooden stick, and make it into a bunch, and the visual effect will be better.

Handmade DIY is a very interesting hobby, both adults and children are particularly fond of doing handicrafts, it can allow people to use their dexterous hands to turn some seemingly useless things into exquisite handicrafts, but also to cultivate personal sentiment, enhance self-confidence, improve personal hands-on ability, so that everyone can enjoy life more elegantly. Beautiful paper flowers are undoubtedly the best decorations, paper flowers are varied, each of which will have a different decorative effect in front of the book, here is a detailed explanation of several handmade paper flower production methods for you to learn.

Handmade paper flower production method encyclopedia

Rose paper flower making

Materials and tools for making rose paper flowers: crepe paper, scissors, wire, glue, tape, pencils, etc.

Meizhou Year Rose Flower Paper Flower Production Steps:

First, choose a color of crepe paper, and draw heart-shaped petals on the paper, here is a reminder, the size of the heart-shaped petals to determine the size of the finished flower. It is better to make a model of regret and then compare it with the drawing, and finally use scissors to cut off the petals one by one for later use.

2. Use a pencil to fold the tip of the petal clockwise to make it look more realistic.

Made of French rose paper flowers

The tools and raw materials you need to prepare for the production of French rose paper flowers: colored paper, pencils, dry branches, small vases.

French rose paper flower production steps:

1. Prepare a square of red paper with a side length of 6 cm and draw a spiral circle on it.

2. Use scissors to cut along the drawing line.

3. Curl along the end of the paper strip and correct the shape of the flower while rolling.

4. In this way, a gorgeous rose is ready.

Large ornamental flower paper flower production

Materials and tools for making large ornamental flowers: large pieces of origami, wooden sticks, adhesive tape, scissors.

Steps to make large ornamental flower paper flowers:

1. Prepare the materials first;

2. Wrap the green paper with a wooden stick as a flower stalk;

3. Make the red paper into the shape of petals;

4. Fold the petals out of a natural and realistic arc;

5. After the petals are ready, they begin to stick to the peduncle;

6. Glue it with green adhesive tape;

7. Glue the petals one by one;

8. Pay attention to the petals from the inside to the outside, from small to large;

9. It's OK if the petals are glued; The curvature of the petals should be bent appropriately.

10. Glue the included green leaves;

11. Cut out the leaves and glue them to the wooden strips;

12. Tidy up the leaves;

13. Green paper is glued to wooden strips;

14. Glue the leaves to the peduncle;

15. Wrap it in green paper.

The above introduced methods of making paper flowers must have been learned by everyone, so let's try it out quickly! The production of paper flowers is not difficult, but it requires care and patience, and each petal must be done well. In addition, in the process of production, if some materials cannot be prepared, you can find a way to use other materials instead, but the production steps will not change.

You can also innovate through the above methods and make unique craft paper flowers according to your own ideas.

You can get it for free

Delicate paper flowers have a sense of beauty that belongs to the art of paper, and they are not inferior to flowers. The following are the steps of "paper handmade paper flower making", I hope to help you!

Method:

Fold the paper and cut out the petals using a template.

Fold the petals to create a natural curve.

Paste the petals one by one and start making paper flowers.

First, paste a circle of petals to get a rough outline of the flower.

Continue with the previous step to plump up the paper flowers.

Ready to make stamens.

Paste the stamens into the center of the paper flower, and the beautiful handmade paper flower will be DIY completed.

The simple handmade paper flower making tutorial is as follows:

1. Fold the square paper bevel in half, fold it in half again after folding it according to the crease, fold the upper corner downward, fold out the crease, fold the two triangles that have just been folded, and then fold it back, the reverse side is the same. Fold the bottom corner upwards into the nest, the other three corners do the same step, and then pinch the center of the flower to rotate.

2. Fold the square paper of other colors along the diagonal, pinch it into a small grinding square along the crease, turn it around and fold it along both sides of the middle line, fold the triangle upward, open the reed to restore the square, and fold it in half along the trace. Fold up in the middle, fold along the midline, fold up along the trace, repeat the step, turn over the triangle and fold inward.

3. Fold the square colored paper diagonally, pinch it into a small square along the crease, turn it around and fold it along the middle line, fold the triangle upwards below, open the recovery square, press it into a diamond shape along the crease, repeat the steps on the other side, open it from the middle, fold it up at the bottom, fold it down at one angle, and the same operation on the four sides.

Expansion: Paper flowers are ancient traditional Chinese handicrafts. The flower paper flower made of paper is also known as "grass flower", in fact, the raw materials are not only paper and grass, but also a large number of raw materials, but it is customary to call paper flowers.

Paper flowers are ornaments on women's buns, before women do not implement haircuts, the trade is very prosperous, in the year of Guangxu, after the satin fake two heads of Beijing Manchu women prevail, the head is partial to flowers, the production is exquisite, the paper flowers worn by the Han nationality are huge and gorgeous, and the paper flower industry is very developed for many years.

After folding the paper, glue it into a paper flower, which is simple and beautiful, and let's make a paper flower.

Paper, glue sticks, scissors, thread.

01 Prepare paper, glue sticks, scissors, and thread.

02 Use scissors to cut a thin strip from the paper.

03 Start from the bottom of the paper and fold it upwards, then the other way around, then up a section of the same width, and then the other way around, until you fold all the strips of paper.

04 Fold the slip of paper, tie it in the middle of the strip with a thread, and tie it in a knot.

05 Open the paper at both ends of the line, glue the left and right ends with glue sticks, and a paper flower is done.

The fold of the paper flower is as follows:

Preparation tools: white paper, cord, toothpick.

Method: 1. Tear the paper into 4 sheets of the same size by folding it in half, stack them together neatly, and fold them into a folding fan.

2. Tie it up from the middle with a white thread.

3. Use scissors to cut the ends into petals.

4. Use a toothpick to pry up from the top layer little by little, and insert the toothpick as deep as possible.

5. Pry it up and finish it flat.

6. After the first layer is pryed, the second layer is pryed, and the method is the same.

7. After prying up all the paper layers, separate the gaps and make them look like flowers are in full bloom, and the small white flowers are ready.