The ASUS ET2400 won t turn on

Dear ASUS users, Hello!

1.After the system is booted, open ASUS Update to automatically update BIOS2If this phenomenon persists, there should be a hardware fault, please send it to an ASUS service center for a full test.

Hope you find the above information helpful! Thank you!

Consult with an engineer to help you solve the problem!

Depending on your situation, it should be a malfunction of the memory module, if it is two sets of memory, please unplug one and try it, maybe the memory is incompatible, or the memory is faulty.

Is it a desktop? If it's a notebook, call a professional! Desktops can take a look at the memory Unplug it with an eraser or A4 paper Wipe the gold finger Don't erase the small chip next to it (note that when you unplug the memory, there are cards on both sides that are opened, and there are cards behind the slot that are also opened) If it doesn't work, remove the memory and graphics card If it doesn't work to turn it on again Go to a professional!

Hope! Thank you!

Whether the memory is compatible, you can re-insert the memory to see. Or check if the other hardware is ready.

Whether the memory is compatible, you can re-insert the memory to see. You can also unplug it and wipe it and try it, or check if the other hardware is ready.

This problem is more difficult to judge, first of all, it is also possible that it is related to your overclocking, I think it may be that you have more problems with the motherboard and power supply, you don't overclock first, restore the BIOS factory settings to try, if it doesn't work, change the power supply to try it, or it doesn't work, it's a motherboard problem, you need to test it to know where the problem is,

You need to unplug the power cord and replug it to turn it on, which is generally caused by hardware protection, such as insufficient power supply and overheating of hardware, this situation will occur, but the problem description is that the normal shutdown can not be turned on, you need to replug the power cord to do it, guess that there is a problem with one of the power supplies or motherboards, it is recommended to change to a high-quality power supply with a larger rated power supply.

Make sure the power supply is energized.

Then use the screwdriver boot method!

Place the screwdriver on the route pin of the motherboard power and try to power it on.!

If it doesn't work. That's the motherboard.

Check the power switch cable and directly disconnect the boot pins on the motherboard. Are you sure it's not a power issue? Unplug the power cord from the motherboard, force the power supply to run (short circuit the green one and any black wire), and see if the power supply is working properly.

If the power supply is fine, it is usually the capacitor in the boot circuit that is broken. Observe if it is deformed.

Blue screen: Don't panic! Take a closer look and give it a try. Don't go into the question of what ** means, you'll never figure it out!

Solving the problem is the key!! The reasons for the blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. (The above ** is usually caused by a faulty driver or system service.)

Suggestions: 1. Try to restore the BIOS to the factory state first; 2. Whether there is a virus in the system, it is recommended that Anrubber use the computer manager to scan and disinfect the virus in the mode of holding the whole beam of the whole beam; 3. Is the driver of the hardware installed successfully after reinstalling the system? 4. It is best to reinstall the operating system first; 5. If there is still a problem after reinstalling the system, it is very likely to be caused by hardware incompatibility; 6. Consult with the merchant or friends who are familiar with the computer, maybe they will help; 7. Use Tencent PC Manager to clean up the system junk plug-in registry or something.

If there is a virus in the computer (open Tencent PC Manager to kill the virus and scan and kill) if you kill the Trojan horse or virus, you should restart it immediately, and after restarting the computer, come to "Quarantine|".Recover", completely remove trojans and viruses! 8. Good luck! I hope I can help you!

Press F8 to move to the advanced option immediately after booting up, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it).

If such a problem arises due to software conflicts, inappropriate drivers, or system problems, you can restore the system in safe mode, or you can't reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please tell us more about how you performed on the computer before the blue screen and how you operated. **What software, patches, and hardware have been upgraded? Tell me in detail what you did before the blue screen, it may be the occurrence of the blue screen caused by these operations, please ask me if you have any questions (I will re-follow you according to the information you provided).

3. If the blue screen shutdown does not often appear at boot, it is OK, or it doesn't work, please press F8 to turn on the advanced option to let go, select "The latest correct configuration" Enter to repair, and restore the system or reinstall the system if it doesn't work.

4. If it is caused by hardware problems, or if the hardware is overclocked and the BIOS battery is discharged (restore the BIOS factory default), it is recommended to plug and unplug the graphics card, memory and other hardware, clean up the hygiene in the computer, and polish the gold finger of the graphics card and memory (test whether the temperature of the hardware is too high).

5. The computer is opened abnormally when the optical drive is being read, which can lead to a blue screen, and the disc can be re-inserted into the optical drive. When the computer is plugged and unplugged with power, it can cause a blue screen, restart the computer to repair it or fix it according to the third item above.

6. There is also whether there is a problem with the hard disk, use the system's built-in function to repair it or repair the bad sectors of the hard disk, or format the hard disk to repartition and reinstall the system, or if it doesn't work, you need to change the hard disk.

7. Recently upgraded hardware, these hardware is not compatible with the system, such as: memory, graphics card, etc., please replace the hardware to try (until the place where the hardware is upgraded is replaced).

8. If it is caused by hardware problems, and you can't find the problem, it is recommended to go to the maintenance there for maintenance.

9. Playing games with a blue screen, it is generally a problem with the game itself, the configuration of the computer conflicts with the game, the graphics card, the graphics card driver is not suitable, the temperature of the CPU and graphics card is too high, the memory is too small, etc., and the other is when playing the game and selling the show, watching, at the same time, it is easiest to do other operations Blue screen, so don't operate other things when playing games and watching the sail (see the blue screen problem is the same as above).

ASUS ET2400E is an ASUS all-in-one product, and disassembling it will affect the normal warranty of the all-in-one computer, and there will also be certain security risks, so it is not recommended to operate it by yourself.

If it is to upgrade the hard disk or modify the SSD, or to install memory and internal cleaning, it is recommended to send the computer to the official after-sales service center, and the professional maintenance engineer will do the disassembly and assembly to be safer and more secure.

The official after-sales service center can be found on the official website in the following sections:

It is not recommended to disassemble the machine by yourself, and it will affect the warranty if you disassemble it by yourself. If it needs to be repaired, it is recommended to go to a service center for repair. You can go to the ASUS official website to inquire about the service center, select the service support option, then click on the service network below to query, select the product category and enter the city where the laptop is located, click search, and you can find the nearest service center.

Lift up the cushions of the two supporting feet in the front, remove the screws, and remove the front panel; Remove all the screws that hold the screen in place, and remove the rest wherever you want, taking care not to break the wire, no thanks.

How do you pretend, the next driver elf or drive life and let them help you get the next suitable driver. Select a stable drive for the next time.

Go to the library to search for ASUS's disassembly tutorial,Not every model has a tutorial,But,It's all the same。