After decorating the house and pasting tiles, what should I do if I find that the front is wide and

Updated on home 2024-07-13
7 answers
  1. Anonymous users2024-02-12

    The current house price to buy a commercial house is undoubtedly the biggest burden for ordinary working people, after buying a house to decorate, decoration for many people have no experienceStart knocking on the wall to pre-bury water and electricity pipelines. Pay attention to the problem during decoration construction:

    The first point is that you need to pay attention to preparing the corresponding decoration materials in advance. The second point is to understand some relevant acceptances in advance according to our specific construction at each step. The third point is to verify the specific installation size of the decoration in time, so as not to be unable to install it in the later stage.

    Pay attention to the acceptance of ceramic tiles, horizontal and vertical, no hollow drums, no warping angles, after the bricklayer is accepted, you can contact the carpenter master to do the ceiling, cabinet, bedroom door, bathroom door measuring tape, stone countertop, window sill board measuring tape.

    Now that you're starting to tile, here's a little suggestion if you're in the south of the area where the resurgence is severeDon't stick wall tilesWhen the tide returns, the house is like a rain leakSome cried. After the carpentry is over, the painter can enter the field to scrape the white, pay attention to the requirements of the wall white is 2 bottoms and 3 sides, and each white scrape must be the previous putty has been completely dryThis ensures that there will be no dark spots on the wall in the future.

    Overall analysis: If we decorate our home from beginning to end, it should contain a lot of content. This mainly includes the preliminary preparation, decoration design, material purchase and decoration construction, and finally the decoration is completed and accepted, so that the whole decoration process.

    Pay attention to the acceptance of ceramic tiles, horizontal and vertical, no hollow drums, no warping angles, after the bricklayer is accepted, you can contact the carpenter master to do the ceiling, cabinet, bedroom door, bathroom door measuring tape, stone countertop, window sill board measuring tape.

    Some precautions for the suspended ceiling in the kitchen. Because we have a suspended ceiling in the kitchen, we have to do it according to the height of the tiles. In addition, some pipelines that need to be installed in the ceiling must be installed in place in advance to avoid dismantling the ceiling later.

    Pay attention to the acceptance of ceramic tiles, horizontal and vertical, no hollow drums, no warping angles, after the bricklayer is accepted, you can contact the carpenter master to do the ceiling, cabinet, bedroom door, bathroom door measuring tape, stone countertop, window sill board measuring tape.

  2. Anonymous users2024-02-11

    There must be no special way to do it overall!

    It can only be that if the room is not square, it is enough to use a wall cabinet or table to make it look like it does not form an inclined plane.

  3. Anonymous users2024-02-10

    If you have a residential house, you can look for a property, if you are self-built house, then it is difficult to get it right, so you can only do it.

  4. Anonymous users2024-02-09

    1.Aesthetic sewing treatment. After the tiles are laid, we find that the gaps of the tiles are of different sizes and are unsightly, so we can use the beauty joint agent for the beauty joint agent for the beauty joint agent.

    When using the seam compound, we generally need to make the width of the seam wider, that is, it is different from the ordinary gap treatment. At the time of processing, we now apply masking paper to the surface of the tile, use masking paper to control the specific width of the grout, and then fill the gap with grout. After the grout is sewn, a part of it sticks to the surface of the tile, so that after we remove the masking paper, we will find that the seam is uniform and beautiful, and we will not see the size of the tile gap.

    2.According to the specific construction of each step, it is necessary to understand some relevant acceptance in advance. The third point is to verify the specific installation size of the decoration in time to avoid later installation.

    Pay attention to the acceptance of ceramic tiles, horizontal and vertical, no hollow drum warping. After the bricklayer is accepted, you can contact the carpenter to make a measuring ruler for ceilings, cabinets, bedroom doors, bathroom doors, marble countertops, and window sills.

    3.In order to find the square, the walls were plastered again。At this time, the floor of our living room has been tiled.

    In fact, when laying tiles, we will find that the final size of the tiles is inconsistent. This is another way of saying that our living room is not square. Then don't settle for anything at this time.

    My personal opinion is to stick to the wall again and find the square. In this case, it is possible to find it if the general error is within three centimeters. At this time, we can protect the tiles a little harder, and then paint the walls again, so that we can treat the walls of our living room.

    4.Grease processing time. Once the tiles have left gaps, it is time to hook the joints.

    Generally, after 24 hours of tiling, that is, after the tile is dried and cured, the grout is carried out. Before hooking, clean the dust and dirt in the gaps of the tiles. Before decoration, the dimensional deviation should be dealt with.

    In fact, the treatment plan is already a very mature practice in the decoration at this stage. Now, like many renovation companies, there is a special project, which is to level the walls and find a square. The so-called wall leveling and square is to find the square of each room.

  5. Anonymous users2024-02-08

    I think you can use decorative paintings, screens, wallpaper to cover it, or you can re-use cement to correct it, or you can use furniture to block this wall.

  6. Anonymous users2024-02-07

    After pasting the tiles, you find that the living room is wide at the front and narrow at the back, and the wall is not straight.

  7. Anonymous users2024-02-06

    It can be re-adjusted, or such a problem can be dealt with according to the installed panel, and the decorator can give an adjustment and remedial plan.

Related questions
6 answers2024-07-13

At present, we use more background materials such as ceramic tiles, wood veneer, marble, diatom mud, etc., each of which has its own advantages and disadvantages. >>>More

15 answers2024-07-13

You go to the building materials market to see, see more, don't blindly listen, the general specifications are very important, he determines your ** per square, to calculate yourself, with 1 point tile specifications multiplied by the unit price, (such as 300 times your 600 specifications is 1.)3÷.6 times the unit price) generally pay special attention to the waist line and flowers, some of which are almost hundreds, you can ask for only one waist line, which will be cheaper. >>>More

23 answers2024-07-13

Do not replace the original tiles must be attached to your conditions: 1. The original kitchen and bathroom department meet your current needs. (That is, the location of the original electric water circuit is acceptable.) ) >>>More

22 answers2024-07-13

The key is also that after the wall tiles are paved, they are relatively easy to clean. >>>More

12 answers2024-07-13

The floor is softer than the tile.

The living room is a public place, the frequency of use is relatively large, we will use some more wear-resistant ground when choosing, so many people will choose tiles, but it is better to pay attention to the comfort of friends or use the floor, because stepping on the floor is much softer than stepping on the tile, and it can also reduce the noise, so that home life becomes more warm and peaceful. >>>More