The printer can t type at first, and then he s okay later, what s going on?

You can't type it once, and you can type it later, which means that he has already joined, and he can work in the future.

It may be because the weather is relatively cool, and the printer is not working very smoothly at the beginning, because of the cold weather.

Some of them are slow to respond, some of them have to warm up, they have limited knowledge and average language skills, but they have done their best to help you!

Maybe you didn't click print when you first started, so you couldn't type.

Or maybe the printer wasn't ready when it first started.

That's why he couldn't type, and he was good on his own.

Maybe it's the relationship between the ink, the room is cold and humorous, and it doesn't turn out, if the ink is good, you can type it slowly.

The big eyes couldn't produce words at first, and the explanation and the failures encountered, but then it was better, and it was more reasonable to say that it was more reasonable for you to use.

If the printer can't type at first, it may be that it is not well connected, or your paper is not properly placed.

Maybe there was something wrong indirectly, but after a while it got better on its own, that's all.

That's when you just turned on the printer and didn't connect successfully!

The printer can't type words at first.,And then he'll be fine later.,That's probably right.,I don't think it's okay for a temporary short circuit.。

The printer can't type at first, and then he's fine, what's going on? This is because the printer has not yet reacted, and you give him a certain amount of reaction time.

If the printer doesn't type at first, and then the back is fine, it may be because of your ink problem.

The printer can't type at first, but then it's fine, and this may be a data transfer process.

The printer can't type at first, and then he gets better, just because the printer may have poor contact.

If the printer head can't type out at first, and then it gets better slowly, and soon there is no core at the beginning, but it is not fully done.

Printer,You can't make a typo at the beginning.,And then it's good later.,I think there must still be some problems.。

The printer may not print the word because:

1. The printer cartridge is out of ink, you can check it and replace it.

2. The printer parts are damaged and need to be inspected and repaired.

3. The printer nozzle is blocked, just clean it.

A printer is one of the output devices of a computer, which is used to print the results of computer processing on related media. There are three indicators to measure the quality of a printer: print resolution, print speed, and noise.

There are many types of printers, according to whether the printing element hits the paper, it is divided into impact printers and non-impact printers. According to the structure of printed characters, it is divided into full-character printers and dot matrix character printers. According to the way that a line of words is formed on paper, it is divided into serial printers and line printers.

According to the technology adopted, it is divided into cylindrical, spherical, inkjet, thermal, laser, electrostatic, magnetic, light-emitting diode and other printers. The printer was co-invented by John Walter and Dave Donald. A device that prints the results of computer calculations or intermediate results on paper in numbers that can be recognized by humans, letters, symbols, and graphics in a prescribed format.

Printers are developing in the direction of light, thin, short, small, low power consumption, high speed and intelligence. There may be several reasons why the printer cannot print words:

1. If the ink of the printer cartridge is about to run out or the printer is blocked due to long-term non-use, we should replace the new ink cartridge in time and clean the nozzle frequently.

2. The printer parts are damaged, and the dust in the air falls on the surface of the printer shaft and causes the aging and failure of the lubricating oil, we should maintain the printer regularly, and finally check whether the system printing service is started and whether the printer is connected to the computer normally.

The printer can't print out the words, what's going on?

First of all, make sure that the printer is not broken, and if not, it can be roughly determined as these three problems. 1. The problem of printing file format may be that the format of your file cannot be recognized normally, so the text cannot be printed, you can use the [Print Preview] function before printing; 2. If there is a problem with the driver of the printer, uninstall the current driver, and then go to the technical support page of HP's official website according to the specific model, ** the printer driver of the corresponding model, and try to print normally after installation; 3. Dismantle the toner cartridge, because dismantling the toner cartridge will destroy the sealing of the toner cartridge, and there will be leakage after the second installation of toner, and the leaked toner is easy to disperse into the air, which will affect the user's health after inhalation. At the same time, the leaked toner can cause irreparable damage to the printer, such as burning the printer's motherboard or other components.

Hardware issues due to powder filling will not be covered even if they are under warranty, and the use of old toner cartridges that have been refilled will cause the cartridge to not charge, affecting printing and without guaranteed quality. Therefore, it is usually recommended that users do not refill the toner cartridge and directly purchase a new toner cartridge to replace it after the toner cartridge is used to achieve the best printing quality.

The reasons why there are no words printed out by the printer are as follows:

1. The printer has no ink: the printer prints out no words may be out of ink, we need to choose to add ink or toner for different printers, or directly replace the ink cartridge, etc., for example, the laser printer needs to add toner or replace the toner cartridge, the inkjet printer is to add ink or change the ink cartridge, and the dot matrix printer is to change the ribbon.

2. The print head is blocked: If there is still ink in the printer, but there is no word when it is typed, it may be that the print head is blocked, it is recommended to perform a cleaning operation on the printer, and then print the test page to check whether the print head can work normally.

3. Damage to the print head: Use the printer to print the test page, if you can't print it, the print head may be damaged, and you need to replace the new print head at this time.

4. Too many printing tasks: If too many tasks are sent during printing, the previous tasks cannot be ended, so the printer may not be able to type. At this point, you can cancel all printing operations, and then restart the computer to resend the task for printing.

Advantages and disadvantages of laser printers:

1. Advantages of laser printers.

The laser printer uses toner cartridge and toner to print, and the printing speed is fast, the daily printing volume is large, the handwriting is clear, and the color of the handwriting is adjustable. Unlike inkjet printers, it can be left for a long time.

Laser printers must purchase a printer with a drum and powder separation structure, and after the toner of the drum powder integrated structure machine is used up, the toner cartridge must be replaced, and the toner can also be added separately after the toner is used up.

2. Disadvantages of laser printers.

Compared with inkjet printers, laser printers are more expensive, which means that the one-time investment is higher. <>

Summary. Hello, first, the cause of the failure: 1. The printing ribbon is used for too long. 2. The print head has not been cleaned for a long time, there are too many dirt, and the print head has broken needles. 3. The print head drive circuit is faulty.

What's going on with the words typed by the printer that can't be typed in the middle?

Hello, first, the cause of the failure: 1. The printing ribbon is used for too long. 2. The print head has not been cleaned for a long time, there are too many dirt, and the print head has broken needles. 3. The print head drive circuit is faulty.

2. Solution: 1. Adjust the spacing between the print head and the printing roller, the fault cannot be eliminated, and the ribbon can be replaced with a new one. If that doesn't work, you need to clean the printhead. 2. If the print head is broken or the driving circuit is wrong, the printing needle or drive tube can only be replaced.

The copy is good.

Dear, is it okay now?

My printer can only type the first few words, and the back one can't type.

Hello dear, I'm glad to answer for you. The printer can only type the first few words, and the back one can't be typed for the following reasons<>

1. This is due to the margin of **, set the layout of the page in the new word document, and set the next margin as needed; 2. The printing settings of the word document are not adjusted well, and the size needs to be adjusted according to the size of the paper; 3. Some machines have energy-saving options, which save toner and reduce the printing area; 4. It may be that the printer has run out of ink and needs to replace the toner cartridge. Restarting the computer, sometimes restarting the computer can solve the problem. Close all open programs.

and save all the office documents. Tap "Start" and then "Shut down". A dialog box will open, select "Restart".

Most computers will shut down, power off, power on, and then restart. After a few minutes, your computer will be ready to continue printing. Reopen the file you want to print, and then try printing again.