How to install a gas water heater ceiling?

Hello, install the gas water heater first, and then install the ceiling.

1. Install a gas water heater or electric water heater first, and install it in advance if there is a boiler.

2. By the way, the smoke pipe of the range hood is also fixed in advance.

3. Finally, install the ceiling.

Suspended ceiling refers to the top decoration of the living environment of the house. To put it simply, it refers to the decoration of the ceiling, which is one of the important parts of interior decoration. The ceiling has the functions of heat preservation, heat insulation, sound insulation and sound absorption, and is also a hidden layer for electrical, ventilation and air conditioning, communication and fire prevention, alarm pipeline equipment and other projects.

Hope it helps.

The gypsum board ceiling needs to be removed before the gas water heater can be installed, because the gas water heater needs to open the vent to the outside of the house when it is installed. The ceiling is a gypsum board family, we must remember to let the gas water heater manufacturer pre-embedding the exhaust pipe, the aluminum gusset plate has the possibility of correction in the later stage, once the gypsum board is done, unless it is removed, or there is no possibility to put it into the ceiling.

Pre-embedded gas water heater smoke exhaust pipe, in fact, is very easy to achieve, now most gas water heater manufacturers, are free to pre-embedded smoke exhaust pipe.

The gas water heater is mainly composed of valve body assembly, main burner, small fire burner, heat exchanger, safety device, etc., and also includes the flue of flue water heater and the strong discharge device of strong discharge water heater. The valve body assembly controls the working procedure of the entire water heater, which includes water valves, air valves, micro switches and ignitions. When installing a water heater, valves should be installed on the inlet pipe, outlet pipe, and gas pipe.

The installation of the gas water heater first needs to install the exhaust pipe, and then use a screw gun to make holes in the wall, install screws, and fix the gas water heater. The next step is to install hot and cold water inlet and outlet pipes. If hot water needs to be used in multiple places, a triangular valve is installed at the gas outlet to allow the natural gas to be discharged from each channel.

The specific steps are as follows:

The first step: first install the exhaust pipe, the focus is on the place of connection, the sealing must be good, this must be the key, and the safety must be good.

Step 2: Use a screw gun to make holes in the wall and install screws to fix the gas water heater and then fix it underneath.

Step 3: Install hot and cold water inlet and outlet pipes, the default in the general industry is to install water pipes on the left hot and right cold.

If you need hot water in multiple places in your home, you need to install a triangle valve at the gas outlet to allow the gas to flow out of its separate channels.

Finally, after the installation, test whether it is successful. Turn on the power of the water heater and open the natural gas valve, so that you can hear the gurgling sound inside the water heater, which means that there is hot water.

Except for outdoor units, all other types of gas water heaters must be equipped with smoke pipes, and ensure that the smoke pipes are connected to the outdoors, and they are not allowed to be used without smoke pipes.

If it is to be installed in the bathroom, it must be installed 'balanced' and it is forbidden to install other types (flue or forced exhaust). If you want to install it outdoors, you must install an outdoor unit, so that you can ensure that the water heater can work normally under outdoor wind and rain conditions.