Can you use pure cement for large wall tiles? Will it lead to a poor sticker?

The use of pure cement wall tiles, the probability of tile falling off is very large, because although pure cement has a good cementing ability, but its shrinkage is very large, after the cement is dry, it will bring greater tension to the tile, can not use pure cement to paste the tile. There are many types of cement, and if pure cement is used, it will have an impact on solidification and shrinkage, and it will directly damage the tiles. Because it is relatively absorbent, it is not suitable.

In general, ordinary Portland cement will be chosen.

To paste the tiles, but also need to be mixed with sand on site to become a binder, and the ratio between them must be correct to ensure that the tiles are not prone to hollowing.

The problem of shedding. There are also many types of cement, and the cement model used for ceramic tiles is generally selected or, the latter has slightly higher strength and relatively large cost, but the bonding effect is better. But if it is only used for pasting tiles, it is better to choose a model, since its strength has already reached the standard, and there is no need to choose a stronger model.

Meitepu tiles still pay more attention to the details, can ensure that when the wall tiles are pasted, there will be no cracking, to ensure that the later can be used normally, but also to choose the best tiles, the use of a long time, the aesthetics will be stronger, and there will be no color difference between the tiles and the tiles. What we often hear about is wet bonding. When sticking tiles, mix the cement and sand evenly in a certain proportion, and you can stick the tiles.

cement mortar. The reason why it sticks to the tile is that it relies on the mechanical tension formed by the mortar and the tile after it has set. One of the most important aspects of this tension is the tension between the cement mortar and the pores on the back of the tile.

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

Yes, if you don't use the tile adhesive, of course, it will not stick firmly, and it is especially easy to fall off in the later stage, and it is also very easy to hollow.

No, you definitely need to add some glue, which is very easy to cause the sticker to be not firm and cause it to fall off.

When pasting wall tiles, many people also want to use only cement, so is it okay to stick wall tiles with pure cement without sand? It's also a very important question.

It is also possible to use only cement for wall tiling, but it is also very demanding for construction, and the cost of materials has increased. This aspect is something that needs to be known.

If it is considered thinner than the thickness of the package, it can be applied directly to ordinary cement slurry.

If the thickness of the packaging material is not required, it is recommended to use cement mortar for economical decoration.

The first trowel must be carried out after the uneven wall surface is cleaned after the uneven wall cutting and repair of the wall surface with a layer of cement mortar sold with a layer of cement mortar at least 15mm thick, before pasting, the base layer is cleaned to produce a thick, rough and smooth substrate.

Both verticals are important: the internal tile adhesive and the elastic line of each wall panel, the standardization for each size, the uniformity of the internal rules of the wall surface in size, the measured pseudo-tile adhesive layer usually has a thickness of 15-17 mm. Pure cement without sand to stick the wall bricks on both sides of the wall tiles, the length is 1mm, and then used as the standard thread-by-line thread paste bricks.

Elastic horizon lines and surface planarization lines: These are key measures to ensure that the plywood is horizontal and vertical, as well as the surface is flat.

Use the level to draw horizontal lines. The surface roughness of each tile wall, which is located on both sides of the hook layer of the thin steel plate tensioned with right-angle fracture paste (white line), is tension flat, white striped surface line: pure cement without sand pasted to the wall bricks The flatness of each row of bricks helps the bricks to control the height of each row.

Tile product selection to understand.

Living room if the size of the wall is generally a living area is based on the size of the indoor space is relatively small, to determine the size of the wall, try to choose a few specifications, such as less than 30 square meters of living room area, we can consider 600 * If the 600 mm specification requires the wall, larger than the 40 square meter living room area, it is recommended to choose the specifications of the wall 800 - 800 mm, the wall area is 1000 * thousand mm can be considered.

Kitchen & BathroomSince the kitchen and bathroom space is relatively small, we usually choose smaller tile wall tiles, such as 300*300mm wall tiles. When building an open kitchen, you can choose a larger tile: 600*600mm.

If your bathroom area is large, you can also choose 600*600mm tiles.

When tiling the pure cement wall, it is also necessary to understand the construction.

You can get it for free

Daily home decoration is always indispensable to the link of tiling, the quality of tiling, has a direct impact on the future living experience. If the auxiliary materials used for tiling are not selected, or the tiling process is not up to standard, there will be a phenomenon of tile hollowing and falling off. At present, in the home improvement market, there are still many people who are willing to choose cement for construction, so in the end, whether cement tiling is good or not, I will introduce you to the advantages and disadvantages of cement tiling.

First, the advantages of using cement tiles.

Cement pasting tiles is more traditional, but the advantage of using cement to paste tiles lies precisely in its tradition. The technology of using cement to veneer is mature and widely used. Secondly, the cost of using cement tiles is relatively low, and the cost performance will be relatively high, which is suitable for most owners.

Cement is versatile, not only for bricking, but also for building walls without causing too much waste. One of the advantages of using cement tiles is that it also has a relatively high degree of adhesion. Cement tiling is the fixation of objects by the adhesive force generated by mixing cement with other materials, and it is not easy to fall off.

Moreover, compared with tile adhesives, cement is not chemical, so it is also more environmentally friendly.

Second, the disadvantages of using cement to veneer tiles.

After talking about the advantages of using cement tiling, let's talk about the disadvantages of tiling with water ridge orange mud. In the end, it is good to use cement to paste tiles, in addition to knowing its advantages, we cannot ignore its shortcomings. Although the technology of using cement to attach tiles is relatively mature, the process is relatively complex, and the builder needs to have a high professional level.

Before using cement tiling, first of all, the tile should be soaked in water, and the wall needs to be wet before cracking the pure brick, and it is also necessary to do support, and the cement tile will be affected by the weather, which is easy to increase the phenomenon of tile hollowing. In addition, the thickness of cement tiles is generally larger, and the material is more wasteful, so it is more suitable to use cement tiles when paving large-area tiles.

The above is to share for you whether cement tiling is good or not, and the advantages and disadvantages of cement tiling, I hope it will help you. If you want to know more about the renovation, stay tuned.