Do you think gypsum board ceiling or aluminum gusset ceiling, which is better?

I think plaster hangers are better. The gypsum hanging board looks more advanced, more economical, and has a longer life. The aluminum gusset hanging plate is particularly easy to rust and is difficult to take care of.

Gypsum board ceiling will make the home look very tall, and it will also make the area of the home look particularly wide, and it will be very stylish, and many young people will choose this decoration method.

I think gyppool board ceilings are better, because gyplight ceilings are more aesthetically pleasing and don't give people a cold feeling.

The condition of gypsum board is better, because it is very corrosion-resistant, and the safety factor is higher, even if it is smashed down in an accident, it will not hurt people, and its water permeability is higher, which can better protect the top.

Aluminum gusset ceilings are better. Because this kind of ceiling is particularly cheap, and it is moisture and heat resistant, the service life will be longer.

I think it's better to choose a gypsum board ceiling. Because it's cheaper, and it's better-looking.

Honeycomb panel, aluminum panel and gypscale ceiling that is good.

The shop ceiling is considered in which aspect, if the effect is considered, the cost of gypsum board can be used to do it is not very high. It can be designed according to the actual size of the store, and then let the carpenter do it on site, because gypsum board can be modeled on the carpentry site. For example, the common ones are downlights.

Some of them are modeled with light strips, and there are all kinds of other woodworking sites that can be made with gypsum board. Aluminum gusset.

It's different, the aluminum gusset is a fixed size, buckled up one by one, basically can only do some flat modeling effect, there may be no gypsum board ceiling in the later stage.

With the addition of light, the effect is even more beautiful.

1. Look at the appearance.

In general, there are issues involving good looks and unattractiveness. Everyone's standards may be different. Personally, I think that gypsum board ceilings are better than aluminum ceilings, and the unity is better, and there are many small plates on the aluminum panels, which are not as good as gypsum board in the unity of peace and integrity.

In addition, aluminum buckles always feel "industrial" heavy.

However, in terms of color selection, drywall is basically white (of course, it is also possible to paint latex paint in different colors), aluminum sheets have different surface technologies, roller coating, paint, film, etc., and can even do a variety of patterns in addition to colors. So, if you think white is monotonous, maybe aluminum button plates have more options. However, I personally feel that the top of the kitchen and bathroom should not be fancy, or that white is best.

2. Stability.

From all aspects of moisture-proof, fireproof, dirt-proof, should be better than aluminum buckle, waterproof gypsum board is not as good as aluminum plate. If you have a well-ventilated kitchen and bathroom with windows, waterproof drywall is not much of a problem. If it is not well ventilated, it will be damp and may affect the drywall.

In addition, whether it is aluminum button board or drywall, the kitchen must choose a reliable range hood, otherwise the oil smoke problem will be bothered by any material.

3. On **.

You might think that aluminum gussets are more expensive, but not necessarily. Integrated ceilings are also very common now, there are many brands on the market, the competition is fierce, most of the ordinary aluminum buckles are at the price of 100 200 square meters, and the waterproof gypsum board is definitely about 200. So, if you use the same appliance, it doesn't have to be cheap.

I think aluminum buckle ceilings are good, in our daily decoration, suspended ceilings will be overlooked, especially in places that often come into contact with water such as kitchens and bathrooms. Waterproof suspended ceilings are often used. Aluminum buckle ceilings and gypsum board ceilings are the most common types.

It has always been controversial who is strong and who is weak of these two. The color of gypsum board is basically white, the uniformity and flatness are good, and the aluminum buckle plate is composed of many small plates, and the flatness is slightly poor. However, the surface of the aluminum buckle plate can be coated by rolling coating, baking and other processes, which has a good texture.

It can be made into a variety of patterns, with more choices in color, and a unified style with tiles, sanitary ware, etc. If the ventilation is poor and the kitchen and bathroom areas are damp, drywall ceilings are susceptible to moisture. Due to the problem of the plate, the aluminum buckle ceiling has better moisture resistance, fire resistance and dirt resistance.

It is recommended that the kitchen choose reliable appliances, whether using aluminum buckle ceiling or gypscale ceiling, will not be bothered by oil smoke. The aluminum buckle in the market is about 100-200 yuan per square meter, while gypsum board is more than 200 yuan per square meter, so it is really not cheap. Water pipes and wires are usually located at the top.

If repairs are needed later, the aluminum buckle is easy to remove from each plate. Drywall is not so convenient to repair. According to the floor level, measure the height of the suspended ceiling vertically with a ruler on the ceiling, and snap the horizontal line of the ceiling to the wall.

After the horizontal line of the ceiling and the keel are in the same position line, according to the master data, the height under the boom, the position and distance between the keel booms are determined, and one end of the boom is fixed to the floor with an expansion bolt.

Assemble the boom nut and install it on the main bolt keel, hang the spreader at the pre-made marking, screw the spreader into the corresponding spreader bolt according to the position of the grading line, screw on the nut and connect the keel with the main spreader, adjust the elevation and straightness of the connector. Fix the edge aluminum strip around the wall with cement nails, press gently along the flanging sequence, snap both sides of the square plate completely into the side wall, and push it tight. According to the floor plan of the ceiling, arrange the lamps and vents, and then install the holes according to the size of the lamps and vents.

Aluminum gusset or gypsum board for ceiling decoration? The foreman told the truth, and after reading it, he suddenly realized!

I think it's better to install gypsum board, because gypsum board looks more high-grade and more beautiful.

I think it's better if it's a living room. Because the shape of gyplight board is very diverse, it can be made to the effect we want. If it is a kitchen bathroom ceiling, I would recommend aluminum gusset. Because the moisture-proof effect of the aluminum gusset is very good, it is not easy to deform.

Due to the characteristics of easy installation, easy care, moisture-proof and corrosion-resistant, aluminum gusset ceiling has been the first choice for toilets, kitchens and other wet functional areas since its birth. With the continuous innovation of production technology in the industry, aluminum gusset ceilings are no longer the same tabula rasa, and a variety of styles emerge in an endless stream, and the styles loved by owners such as Chinese, new Chinese, and European styles can be perfectly matched. Since then, there has been a trend of installing aluminum gusset ceilings on the ceiling of the whole house.

1. Personally, I think the aluminum gusset. The color of the stone shed is basically white, which is better in uniformity and flatness, while the aluminum gusset is made of many small boards, and the flatness will be slightly worse. However, the surface of the aluminum gusset can be rolled coating, baking paint and other processes, with good texture, can be made into various patterns, and there are more choices in color, forming a unified style with ceramic tiles and bathrooms.

2. In the kitchen and bathroom area with poor ventilation and humidity, the gypsum board ceiling will be easily damp. Due to the problem of material, the aluminum gusset is better in terms of moisture-proof, fireproof and dirt-resistant. The construction chain bureau proposes that reliable electrical appliances should be used in the kitchen, so that whether it is an aluminum gusset or a gypsum board ceiling, it will not be troubled by oil smoke.

3. Ordinary aluminum gusset is about 100-200 yuan per square meter on the market, and gypsum board plus labor costs are more than 200 yuan per square meter, so with the same electrical appliances, I really can't say which one is cheaper.

4. We all know that water pipes and wires are usually topped, and if they need to be repaired in the later stage, each piece of aluminum buckle plate is easy to disassemble. In the case of gypsum board, it is not so convenient to repair.