Ask for help, about tile seams, how to seam tiles?

With the improvement of people's living standards and the change of aesthetic concepts, the home decoration.

The requirements are getting higher and higher. According to our previous ordinary decoration method, the tiles are laid in the house.

There will still be gaps, which is not good-looking. Now there is a new ceramic tile seam process, which can optimize this problem, and the tile seam can beautify the tiles that have been paved, and the effect is very good, which can make the decorated tiles more neat, durable and beautiful. But the construction process.

Tile sewing method

1. Tool preparation: glue gun, wallpaper.

Knife, silicone scraper, small bucket.

masking paper; 2. Choose tile grout.

Color: generally it is determined by the customer according to his preference;

3. Operation steps: poke a hole in the mouth of the tile joint agent bottle, then screw on the discharge nozzle, and then use a wallpaper knife to cut the discharge nozzle into a 45-degree angle, the tile joint is less than 2 mm, and the front end of the discharge nozzle can be cut out of the slope angle with a wallpaper knife; If the tile joint is larger than 2 mm, it can be cut off a little more; The width of the discharge nozzle should be less than the width of the seam to ensure that there is no overflow;

4. Construction method:

1) Clean the scene after entering the site, and then use a wallpaper knife to clean the filler in the tile joints and on both sides, and the ground.

Floating dust is not allowed;

2) Quickly wipe the tile joint with a sponge dipped in water, confirm that there is no dust, use a glue gun to evenly hit the material in the brick joint, apply about 1 meter, and block the discharge nozzle;

3) Then use the silicone board to scrape the material immediately, a small amount of material overflowing on both sides of the brick joint, wipe off with a slightly damp sponge, wipe it several times, and the sponge should be cleaned with water frequently;

4) Wait for an area to be done once and then hit it a second time from the beginning to ensure the quality of construction;

5. Construction quality standards: it is necessary to be smooth and not edged, there can be no bubbles, there can be no small pits, the brick surface is not allowed to overflow, and the ground is as clean as new before leaving;

6. If the customer is afraid that the overflow on the brick surface will not be clean, then you can use masking paper to stick to the edge of the brick joint, and then use a glue gun to beat the material, scrape it flat with a scraper, and wait for the material to dry, and you can open the masking paper after repairing.

Precautions for tile seams

1. Ensure that the bottom surface of the construction tile joint must be smooth, strong, dust-free and not wet;

2. The width of the discharge nozzle is slightly less than the width of the joint, so that the discharge can completely cover the bottom surface of the tile gap;

3. The discharge should be uniform, less should not be more, and the small bricks with many cross interfaces should be scraped lightly;

4. The construction temperature is 15-30 degrees, and the overflow must be cleaned up while construction;

5. Within 3 hours of ground construction, do not walk around on it to avoid dirt polluting the surface of the sewing agent.

Summary

The technical requirements for the construction of ceramic tile seams are quite strict, to be very careful and patient, and the materials selected are also good, otherwise the effect of decoration will be the same as not doing beautiful seams, so it is necessary to choose some familiar old employees or find a decoration company.

Help is the best, choose a reliable brand in terms of materials, tiles are also widely used at home, since the house is decorated, don't save this step. Tile joints can also prevent tile leakage, easy to clean and many other advantages. If you want to know more, you can continue to ****'s Tuba Rabbit decoration network. Oh.

If you want to decorate a new house to look good, tile seams are indispensable, which seems to be only a few millimeters of gaps, but there are a lot of doorways hidden inside

What is beauty sewing?

Tile seam, as the name suggests, is to beautify the gaps between the tiles.

The drying process of the original sewing agent shrinks, so the latest sewing agent - two cans of raw materials are extruded together and a curing reaction occurs.

This porcelain joint agent is not easy to shrink after extrusion and is strong, and has excellent waterproof and mildew resistance.

The material of the beautiful sewing

The material of beauty sewing can be roughly divided into four categories, including white cement, grout, beauty sewing agent, and epoxy color sand.

White cement: It was originally used for caulking, but its surface is rough, easy to stick to dirt, and difficult to clean.

Grout: It is made by mixing cement and quartz sand, which has strong adhesion, wear resistance but not water resistance.

Beauty sewing agent: the main ingredients are resin and curing agent, which has a smooth surface, easy to clean, waterproof and moisture-proof, and good decorative effect.

Epoxy colored sand: It is to add quartz sand on the basis of resin and curing agent, which requires professionals to construct.

The role of beauty sewing

Beautiful: The color of the beautiful seam is rich, natural and delicate, with gloss, and it has a good decorative effect with different tiles.

Practical: In addition to filling gaps, it can also effectively waterproof, and more importantly, it can protect the tile from bacteria and prolong its service life.

Environmental protection: The materials used are non-toxic and harmless, and can effectively prevent the growth of bacteria, making the family more warm and comfortable.

The area of the beautiful seam

If the budget is sufficient, it is still recommended to do sewing for the whole house.

However, if you are on a budget or only want to do partial sewing, it is recommended to give priority to the kitchen and bathroom.

Mainly because the kitchen oil stain is more serious, it will be well cleaned with beautiful seams, and the bathroom is more humid, and it can prevent mildew well with beautiful seams.

The color of the beautiful sewing

Choose a beautiful seam that is similar to the color of the tile, so that the whole will appear more harmonious and the gap will not be too obvious.

Choose beautiful seams that have a strong contrast with the color of the tiles, highlight the sense of lines of the gaps, and also give the tiles a sense of breathing.

Choose a solid color, no glitter seams, solid colors are very versatile no matter where they are used, and the gaps of solid colors can highlight the beauty of the tiles.

Choose a neutral color for the seam, in addition to the timeless black, white and gray, there are also vanilla, beige, light coffee and other colors to choose from.

Whether you need sewing and how to do it depends on your own preferences and requirements for the home environment.

<><The method of tile beauty seaming

1. The first lead first clean the gaps, in the wheel to clean the gaps need to hold the wax rot cleaning knife with both hands, in a straight way to clean out the depth of three to five mm of tile gaps, if the wet wall joints need to be dried and cleaned, use a wet towel to wipe the joints after cleaning.

2. According to the process of ceramic tiles, choose whether to wax or paste masking paper, waxing needs to use a sponge to dip a small amount of wax, evenly spread around the gap of five to ten centimeters, and apply in accordance with the order, the force needs to be even.

3. Then install the mixing nozzle, pay attention to the uniform force, so as not to slip the buckle, and finally install it on the glue gun, open an opening with the same size as the gap, squeeze out the rubber material in front of ten to thirty centimeters, and then glue it at a 45-degree oblique angle.

4. After the glue is finished, use special tools to press the seam, pay attention to the force evenly along one direction, close the edge quickly, and finally 24 hours after the construction, you can use a special shovel blade to clean up the remaining materials after the seam is cured.

After the tile is pasted, in order to achieve better aesthetics and avoid dirt in the tile gaps, you can do a beautiful seam, how to do the tile seam? 1. How to do tile seams 1. Before making beautiful seams, you first need to clean the gaps in the tiles, clean them with a vacuum cleaner, and then wipe them with a clean rag. Next, apply masking paper around the gaps in the tiles, which can be applied along both sides of the gaps.

2. Load the sewing agent prepared by the quasi-buried source into the glue gun, and squeeze off the front end by 30 cm to better mix evenly and ensure that the slurry is fuller. Squeeze the joint agent evenly in the gap of the tile, and then use the joint ball to press the joint, as far as possible to ensure that the speed is uniform. Then press the seam from the middle to the outside, and when it is finished, wait until it is completely solidified, and then use the shovel to remove the excess seam around the periphery.

In a day or so, it can be completely cured and ready for use.

Ceramic tile is a common product for home decoration, but it is inevitable that there will be a certain gap when laying tiles, so the gap does not look very beautiful, ceramic tile beauty is currently a more common way, tile beauty joint is a high-end product for gap decoration, suitable for tile, mosaic, stone and other gap beautification, kitchen and bathroom bathroom corner decoration. Let's introduce to you, what is the beauty of ceramic tiles? What are the benefits of tile joints?

First, what is the beauty of ceramic tiles?

1. The beauty sewing agent is the current common single-tube beauty sewing agent, which has been familiar with and widely used by consumers after more than 10 years of pushing Lu Nian Huai Guang in the market. The advantages are that it is easy to use, rich in color, **, does not blacken for a longer time than white cement and caulk, and has a smooth surface. The disadvantage is that the shrinkage collapse is obvious after curing, and it will form obviously"v"The trough can only be filled with a table, not full, and cannot be used in areas that are often in contact with water, such as bathrooms and kitchens.

Because this sewing agent is water-based, it is not good to construct when the temperature is lower than 5 degrees in winter, and it must be stored in a warm temperature, otherwise the water agent will be frozen and deteriorate.

2. Ceramic tile caulk is composed of high-tech new polymers and high-grade pigments, which is different from white cement and color caulk (dry powder cement materials + low-grade pigments) mainly composed of inorganic materials, and it is made of high-tech new polymer materials + high-grade pigments and special additives.

Second, the benefits of tile seams

1. The sewing agent should be waterproof and good: Boshi sewing agent is refined by imported polymer nanopolymer and high-grade pigments, its structure is dense and uniform, forming a dense protective film on the surface, overcoming the shortcomings of inorganic materials that are easy to seep water. Therefore, when scrubbing wall and floor tiles, there is no need to worry about sewage entering the brick joints and blackening the joints.

The brick joints are no longer damp, and naturally there will be no mildew, and all kinds of bacteria will lose the hotbed for the production of sensitive colonies.

2. High bonding strength of beauty caulk: traditional caulk (caulk), especially white cement, is made by diluting powder with water and stirring, and this inorganic caulk has low bonding strength and is easy to fall off, resulting in cracked bricks and empty bricks. However, the Boschmei sewing agent refined from polymer nanopolymers and high-grade pigments will not occur at all.

Because the molecules of polymer compounds are connected by carbon chains, structural compounds also take advantage of this characteristic of polymer compounds. Regular, tight and very strong. Therefore, the adhesion ability is very strong, and the thermal expansion and contraction phenomenon is not obvious at the temperature of -30 -80, which is the ideal sewing agent.

Tile seam is now used when people decorate the house, it not only looks good, but also has a practical role, so what is the benefits of tile seam and tile seam, we have also understood it through the above introduction.