What is the difference between cutting hair with scissors and pushing it off with clippers when a bo

1. The sense of hierarchy is different.

Cutting your hair short with scissors will make the whole hairstyle have a sense of layering, design, and look more beautiful; Pushing off the whole shape with a fader will be smoother, but it is relatively not so good-looking.

2. The length is different.

Cutting hair short with scissors will still have a certain length left, which is not so refreshing; The hair will be very short and last relatively long after being pushed with a clipper.

Extended Information: The Four Basic Types of Men's Hair Cuts:

1. Aircraft head.

The airplane head can be said to be a more popular shape in recent years, a good-looking airplane head, which will make itself look more fashionable.

2. Board inch.

As a very classic basic style in hair cutting style, it will make people look more neat and tidy. After cutting the hair on both sides, you can cut the hair in the middle a little shorter, and you can create a board head, which is very simple and convenient.

3. Shovel the green head.

This hairstyle is popular among men and has a lot of personality. It is to shave the back of the head and the hair on both sides, leaving only a little hair in the middle. This look is suitable for people of all ages and will make people look more masculine.

4. Big back.

This look is very cool and gives it a very formal look. First of all, you have to divide the hair into two or eight parts, then cut the side with less hair shorter, and finally use hairspray to fix the hair.

If it grows, it will warp.

The scissors are cut short and thin, and there is no length and no falling, it will still warp.

So. He will still warp the length of 2 to 3 months.

Either the two sides are left long as a whole.

If there is a length, it will fall, and it will not warp.

Either just push the tube a little shorter and a little longer.

For reference, if there is a discrepancy.

Hope to bear with me.

1. Comb and cut your hair first.

2. The corners should be reasoned with faders, and the transition should be smooth along the direction of reasoning.

3. Comb and cut the short hair that is then followed by a comb.

4. Place the clipper on the comb to smooth the reasoning, comb less hair each time, and comb it along one after another.

5. In the same way, gradually move the direction of the comb, and cut it naturally and sequentially to the back of the head.

6. After thinning one side, you should look at the effect of the front, and then comb it backwards.

7. After the short hair on the upper part of the head is cut, continue to move the direction of combing and cut it to the other side of the head.

8. Stop every time you turn the direction and check the excessive hairstyle.

9. Trim the hair at the back of the head, move the comb and cut from top to bottom, from high to low, and also cut in order.

10. The higher part still needs to be combed with a comb and pushed and cut with a fader.

11. The bottom part should be pushed and cut with a small clipper.

12. The lowest part should be slowly trimmed from the bottom up, and the fader should be moved upward from low to high, so as to connect smoothly with the upper part of the hair.

13. Finally, the top head shape should be trimmed, and then the fingers should be sandwiched with a comb and then the hair, and the scissors should be used to trim the trapped keys, this kind of hair cutting is relatively difficult, and the hair should be combed and trimmed according to the required hairstyle.

14. After cutting.

1. To work with two hands, you need to cooperate with both hands at the same time, try to keep the electric push without pressing the hair cutting comb, and move on a plane.

2. The hairdressing comb needs to have a contact surface with the hair, and the hair on the comb can be pushed over after carefully looking at the neatness and correctness.

3. For the hair above the occipital bone, it needs to be guided by the original push, how much needs to be removed and how much is left, and the heart needs to be accurate, and then push it off without hesitation.

4. The edge of the outer line should be cleaned after the men's edge is pushed, giving people a refreshing feeling.

The landlord is just starting out, right? In fact, this is a process problem! Do you think that place is not appropriate?

The fader must be skilled enough Pushing the edge is a problem The technique must be passed It depends on whether you usually take more clippers To be honest, the hairstylist was timid at first After all, it is a pit if you are not careful, right! Practice more, you will find the feeling in half a month, find your favorite way to cut your hair, and don't deliberately imitate other people's ......Look....

Don't shake your hands, practice more

We have the secret recipe. It works. No. Target.

What is a rolling loss? Hello, Push Shear is a haircutting tool that is also known as a fader shears or push scissors. It is characterized by the curved shape of the blade, with no contact surface between the two blades, and the cutting operation is completed by pushing and pulling.

Push shears are used differently from traditional regular scissors. To use it, the barber needs to clamp a hair between two curved blades, and then complete the pushing and pulling operation with the co-response motion of the fingers. Since there are no contact surfaces, it is easier to control the length and depth of your hair.

Compared to traditional regular scissors, push shears are easier, faster, and more accurate in the haircutting process, and can better maintain the natural flow of hair. Therefore, in the current hair industry, push shears have become one of the most important tools.

Hello dear, happy to answer for you. Push shears are a kind of manual gardening tools, which are used to prune plants such as succulents, potted flowers and plants. The push-shears look like a pair of scissors in appearance, but they are different in that the blade is raised and the edge of the knife is not cut in half.

Push shears are used to cut branches by placing the lower jaw above the branch and lowering the upper jaw below the branch. Push shears are suitable for pruning plant stems and branches with a diameter of no more than 1 cm, which can create a neat and beautiful form for the plant without causing excessive damage to the plant. How to use the push shears:

Choose the right shear: Choose the right type and size of shear according to your specific needs to make it easier to prune. Cleaning scissors:

The shear needs to be cleaned before use, and remember not to use wire or steel brush scraping, otherwise it may wear the knife edge. Locate the pruning position of Hanling: determine the part to be cut off and avoid blind pruning; Directional, point, parallel or beveled shear methods are performed as required.

Pruning: Cut the branch by pushing the palate of the pruning to the underside of the branch. Stay safe:

Attention should be paid to safety during use, and the clippers should be put away and placed in a safe place when leaving. It should be noted that the use of pruning should be based on the growth state of the plant and the purpose of pruning to choose the appropriate pruning method, and use it reasonably. If you are not very skilled in pruning skills, it is best to talk about the lack of advice and learning from experienced gardeners to avoid excessive damage to the plants.

Summary. Exquisite push scissors, small push scissors, easy to use push scissors "push", pronounced as tuī, was first seen in the Qin Dynasty Xiao Seal era, in the six books belong to the shape and sound of the character. The basic meaning of "pushing" is to push the object outward or forward with force to make the object move, such as pushing a cart or pushing a boat along the water; The extended meaning is to use tools to move forward to carry out work, such as pushing heads, bulldozing.

In daily use, "push" is often used as a verb, indicating the sound of the hand.

Exquisite push scissors, small push scissors, easy to use push scissors "push", pronounced as tuī, was first seen in the Qin Dynasty Xiao Seal era, in the six books belong to the shape and sound of the character. The basic meaning of "pushing" is to push the object outward or forward with force to make the object move, such as pushing a cart or pushing a boat along the water; The extended meaning is to use tools to move the acre forward for work, such as pushing heads and bulldozing. In daily use, "push" is often used as a verb to indicate from the hand, disturbing the sound of the cave.

Is it a combination of push and cut?

Recommended for you. All kinds of buried push-shear carrying liquid masses. Dense push-shear.

Tattered push shears. Worn out push shears. A clean push shears.

Rusty push shears. Rusty push shears. Sharp push shears.

Glittering push shears. Discarded push shears. Scrap push-shears.

Cracked push shear argument orange. Expensive push shears.