Can you use a hair dryer to blow water into your phone?

If you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Customer Service Center.

Repair Spare Parts**.

Boarding service.

When there is little water, it can be used. If there is a lot of water, it is easy to blow some glue for a long time, so it is recommended to take it to a maintenance shop to repair it.

The hair dryer does not work, and the water vapor inside it does not evaporate. I.

After the mobile phone is flooded, you can actually use a hair dryer to blow it, but you must remember to use cold air to blow, never use hot air to blow, and also, when using a hair dryer to blow the wind speed should not be too fast.

After the phone gets into the water, the first thing to do is to turn off the power, of course, instead of pressing the power off button, but remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible. If your phone's warranty has expired and you don't want to send it for repair, you can boldly take it apart!

Wipe the parts of the phone with a tissue, and then blow it with a hair dryer for a few minutes, in order to ensure that all the internal parts are dry, it is advisable to air dry the phone for a few more days before you can turn it on again.

There is also a situation that the mobile phone has not been in the water for a long time, and it is fished out in time, and the situation of the mobile phone entering the water may not be particularly serious at this time. You don't need to take some of the parts out to take a look, or do some other treatment, you just need to blow it with a hair dryer, and you must remember not to use hot air, you must use cold air.

1. Turn off the machine and dry naturally.

First of all, if the water has seeped into the phone, then you are likely to not be able to turn it off, if you can remove the battery, you must remove the battery first, and if you can't remove the battery, try to press and hold the power button for more than 10 seconds to turn it off.

Use a paper towel to absorb moisture from the surface. Pay attention to the headphone jack and charging socket part with a cotton swab or roll the toilet paper into a thin strip of paper to suck up the water, do not use a toothpick to stuff the paper ball directly into it, a accidentally can not take out the paper ball will outweigh the loss.

In addition, not all phones that have been flooded can be dried naturally and returned to their previous state of use. For example, there may be fine water droplets entering the display of the mobile phone to form water stains and mist on the screen, which will affect the display clarity of the mobile phone.

If your phone is falling straight into the water, or only the bottom half of the water is in the water, then put the phone vertically. If your phone is flat in the water, place it horizontally, not upside down.

If you don't soak in water for a long time, try not to blow it with a hair dryer, as strong winds will blow water droplets to other parts of the motherboard, increasing the possibility of burning the motherboard.

You can put your phone under a heat source such as a heater or desk lamp to let the moisture slowly dissipate.

2. Rice water absorption method.

Stuff the phone with water into a bag of rice and seal it for 24 hours.

Rice is a very good desiccant, with a strong dehumidification and water absorption effect, as long as the mobile phone is not in the water for a long time, it can be resumed and turned on normally.

If the mobile phone has a large amount of water, it will not be dried with a hair dryer, so we must disassemble the phone and remove the battery first. Then dry it thoroughly and then put on the battery to see the damaged state.