One network cable is divided into two ways, how to cut off the other one?

The 2nd pin at one end of the network cable is connected to the 6th pin at the other end, and the other pins can correspond one by one, that is, in the crossover cable production method introduced above, do not throw away the extra 4 wires.

A network cable is divided into two ways, that is, unplug the cable at the other end, and don't let him connect it.

A network cable can be cut off in two ways, and you can cut it directly with scissors.

If you divide into two ways, you have to cut off the other way. Just cut his thread.

Just cut off the unused ones directly from the back of the brancher!

Answer: Install a distribution (selection) switch (a few dollars to get it).

If you want to cut off the other way, you can just pinch it off with pliers.

The other section cannot be cut off, it can only be put for standby, and it cannot be used after cutting.

When the line is changed, one is mainly cut off, and after it is cut, it can be processed inside.

How to cut off the other section of the network cable in two ways, this can be connected to other places.

You can use it, just connect the disconnected network cable.

1. First of all, prepare the required tools, insulating tape, scissors, and broken network cables;

2. Use scissors to peel off the outer skin of the broken network cable, the peeling length can be 5-10cm, or you can judge by yourself, and finally you need to use insulating tape to wrap the peeled network cable;

3. After peeling off the outer skin, separate the 8 cores inside;

4. Then peel off the outer skin of the 8 cores respectively to expose the copper cores inside;

5. After that, the broken network cable is screwed together and connected with the copper core of the same color;

6. After screwing, use insulating tape to wrap the copper core, and then connect and wrap the remaining 7 cores in the same way;

7. When all the 8 cores are connected and wrapped, use insulating tape to wrap the 8 cores together, which can be wrapped thicker to avoid accidental breakage again.

If you want to split a network cable into two, you need to remove all 8 thin cables for use.

The network cable commonly used at home is called "twisted pair", which consists of 8 wires of different colors, and generally only uses numbered cores to transmit data, that is, for sending and receiving.

By color:

Orange and white and orange are used for sending;

Green and white and green are used for receiving;

Therefore, first take orange and white, orange, green and green, and crimp the crystal head at both ends to make the first network cable.

The crimping method of the normal network cable is for reference:

568A standard: white-green, green, white-orange, blue, white-blue, orange, white-brown, brown 568B standard: white-orange, orange, white-green, blue, white-blue, green, white-brown, brown two methods can choose one of the two (generally use the second method);

The remaining 4 network cables, according to the method of the previous network cable, insert the corresponding port, pay attention to the same color at both ends, so that you can win a network cable to make two.

Plug the original network cable into the WAN port of the router, and then prepare two cables to connect to your computer from any two of the other four ports. Here's how to set up the IP. If your brand is TPLunk, enter it in IE, and if it's dlink, enter it.

If you want to enter your username and password, it is: admin (both are the same).

After entering, there is a setup wizard, and it is simple to come down, just follow the prompts. The key step is to enter your original broadband account number and Mima, and you can complete it step by step.

One network cable for six people does not affect each other's speed.

Unrealistic ... Just the speed of the school, don't think about it.

The network cable is disconnected and can still be used. Thyna.

After the network cable is broken, as long as it can be connected, it can still be used, and there are two ways to use the Zheng nuclear base of the wiring, one is to use the insulating tape docking method, because the network cable will have different colors inside, and it needs to be connected according to the same color, and then use insulating tape to wrap it, which can ensure that the network cable is connected correctly, but there may be certain differences in this technique, such as the problem of network signal interruption. If you want to avoid such a problem, we can choose to use a crystal head converter, which can effectively solve the problem of broken network cables, directly go to the computer store to buy a network cable adapter, both sides are crystal heads, and then connect the network cables, you can ensure that the network will not be interrupted, and directly plug in, you can use.

The following table describes the types of connection network cables

In the network world, there are many types of network cables, such as optical fiber, twisted pairs, copper shaft cables, etc., and the network cables that we usually use broadband connection are generally used twisted pairs. There are many types of twisted pair cables, basically using more than 5 types of network cables, or choose 6 types of lines or super 6 types of cables, and class 6 lines and class 5 lines compared with the transmission speed will be faster. There are also 7 types of lines or super 7 types of lines, but ** is slightly more expensive, basically less used.