Two computers use optical fiber to access the Internet, how to connect two computers with a fiber op

Updated on technology 2024-04-13
15 answers
  1. Anonymous users2024-02-07

    First of all: I want to ask you, do you have 2 cats in your house, do the 2 cats use the same number? If it is not the same number, it is enough to connect one of the two machines separately.

    Secondly: if it is a number, then it is useless to have a switch alone, there must be a router, so it is recommended to buy one.

    And finally: if you don't understand it, secret me.

  2. Anonymous users2024-02-06

    The optical fiber should be connected to a transceiver, and then to the RJ45 crystal head, which is connected to a laptop or computer.

  3. Anonymous users2024-02-05

    We're like that, but we're using routers, and I'm not sure if you can use a switch in this case, but the router is definitely dripping.

  4. Anonymous users2024-02-04

    You can use a router to connect two computers to the Internet at the same time.

  5. Anonymous users2024-02-03

    It's a luxury to use fiber to access the Internet, first you have to buy an fiber to Ethernet converter, and then buy a router. Needless to say, the rest of it.

  6. Anonymous users2024-02-02

    In fact, if you have TP-link, you can share the Internet! Because there are a lot of descriptions to help you find the method. For details, please refer to **:

    It is recommended that you buy an optical modem first, what you have now should be (digital modem), this one is not used.

    Optical cable - optical modem - router - PC

    About the debugging of your router is described in detail above. Also, your router (TP-link) should be a wireless router! Then your laptop will be able to access the Internet wirelessly.

  7. Anonymous users2024-02-01

    1: First of all, the external network needs to be converted through a modem, ordinary broadband we call cat, fiber broadband is called fiber optic modem.

    2: If you use a computer, you can directly use a computer to link modem to dial-up Internet access, if you need to use the computer for more than two days, you need to use a device called a router.

    Switch: A switch is a network device used for electrical (optical) signals. It can provide an exclusive electrical signal path for any two network nodes connected to the switch. The most common type of switch is an Ethernet switch.

  8. Anonymous users2024-01-31

    You'll need a switch, and then connect it, and once connected, you'll need to set your IP address if it's set manually. Then you can go online.

  9. Anonymous users2024-01-30

    First, buy a router.

    Second, buy two network cables.

    Third, set up the computer and routing according to the manual.

  10. Anonymous users2024-01-29

    **Yes, with a router, dozens of dollars.

  11. Anonymous users2024-01-28

    This is the same connection method as before.

    The optical fiber should be connected to the optical modem, and the optical modem has a network port, pull a network cable out from the network port, and insert the computer network card.

    Open the broadband connection, enter the username and password provided by the operator - click on the connection.

  12. Anonymous users2024-01-27

    With a router, you can use fiber optics for multiple computers at the same time.

  13. Anonymous users2024-01-26

    Generally, it is to buy hardware routing, optical fiber to connect to the route, and then connect to the switch, and the switch taps to the client. If you want to manage and limit easily, find a P4U or Sai4U, 845 motherboard, 256 512 or so memory, if there are many machines, you need two Gigabit network cards, no more than two 100 Gigabit network cards, hard disks are casual, there is a 1G space on the line Install the ROS system into it, and you can set restrictions on the next ROS script on the Internet You can limit what data a certain IP machine can only receive, and you can not access the Internet on any machine you want

  14. Anonymous users2024-01-25

    Oh this landlord is too careful, whose network cable is only for 1 computer, besides, yours is still a fiber optic line, it is no problem to connect 10 computers, the LAN port of the light hair is connected to the VLAN port of the router Enter the web page of the router, the detailed router has a manual, enter the account number, and save it. In order to make money and say that they can't connect 2 computers, the telecom company wants to make more money, pediatrics. Hehe.

  15. Anonymous users2024-01-24

    You just use the router to connect the anchor on the line, the router is plugged in a network cable, and the IP default of the 2 computers is OK.

Related questions
36 answers2024-04-13

The broadband network cable of the telecom is directly connected to the switch (if it is ADSL, it is also the same to connect the modem to the switch), and the host IP setting method for dial-up Internet access first: see the local connection in the network connection, click on the right health selection properties, and click the Internet Protocol (ICP IP) attribute before the icon in the notification area after the connection, and click to use the following IP address: IP address to fill in: >>>More

11 answers2024-04-13

It's not allocated by 50, and advanced routers only have a speed limiting feature, which is to limit the traffic of one of the computers. >>>More

6 answers2024-04-13

Hello Online Entrepreneurship Netzi

His strengths are: >>>More

19 answers2024-04-13

This answer is to the notebook. Whether your network cable is LAN or extranet. >>>More

10 answers2024-04-13

The two computers can be connected directly with a crossover cable. Set up the network connection first, and the working group will do the same. Set the IP address of the NIC connected to the passenger plane in the host >>>More