The original caulk at home is a bit dirty, is it necessary to refill it again?

The purpose of wiping a crack is to wipe off the remaining dust and damp parts in the gap. At this time, we usually use a dry rag to wipe along the gaps. At this time, it is best to wipe the dust on the surface of the tile to refill, it is best to find a professional company to do it, doing it yourself may cause damage to the tile, you must know that the caulk cannot be kept clean forever, so dirty is for sure, it is recommended to use half-layer caulk, half-layer caulk tile caulk can be selected after the caulk is dirty, and the caulk material is much more practical and beautiful than the traditional caulk.

It is recommended to find a professional construction team, and epoxy color sand is more compatible with your antique bricks. If it is a polyurethane-based caulk, it is harder and needs to be treated with an angle grinder, which requires professional operators to operate, and if you are not careful, it is easy to grind the tile, or cause the tile to crumble. Then vacuum the crevices.

In this case, you can use a brush and a variety of cleaning products, such as toothpaste, soap, and baking soda. However, it will not take long for it to start to turn black and yellow, there are also professional cleaning agents on the market, you can use toothbrushes and brushes, first soak the dirty place in water (wet towel compress), and then use a toothbrush to dip the stain cream cleaning agent and other products to gently brush off the dirt inside, after brushing clean, you can use a brush dipped in waterproof agent to brush the gaps, although both belong to caulking materials, the function between the two is to beautify the tile gaps, however, the performance between them is not the same, the former can only simply beautify the tile gaps, It is not waterproof, mildew and stain-proof, and the beauty sewing agent is a substitute for caulk, so it has the advantages of caulk. In addition, the brick joints on the walls and floors of kitchens and bathrooms will turn yellow and black after a period of use, and sometimes even a good caulk can not solve it, but the beauty caulk can.

The ingredients are white cement, trace polymers and pigments; The whiteness of white is about 86%, and the surface strength is slightly higher than that of white cement; There are many colors of color caulk, but they are dull and dull, and the effect of antique brick jointing is generally slightly better.

It is necessary. Because this may appear more tidy and not too messy, it also plays a certain decorative role and can make the floor more tidy.

There is no need. Because it will be more troublesome to actually implement. So I don't mind if you do this, it's going to be very tiring.

I don't think it's necessary, as long as it doesn't affect our lives, it's normal to be a little dirty.

I think it's necessary to fill it in again so that it looks very tidy in the house.

If you want to re-caulk the tile aperture, then the original caulk must be cleaned, which is also the most critical step in tile aperture treatment. So the first step before caulking is to slide the caulk inside with a caulking tool. For example, we can use a wallpaper knife to slide back and forth between the gaps in the tiles to completely loosen the sealing tape.

It is necessary to clean these caulks out of the cracks in the tiles. When cleaning the joints, we use the joint cleaning tool to remove everything on top, along the gaps of the tiles, starting with the loose caulk.

Then use a hair dryer to blow the gaps in our tiles as a whole. When blowing, blow along one end of the gap to the other. The purpose of wiping the crevices is to wipe off the dust and wet parts left in the crevices.

At this time, we generally wipe along the gap with a dry cloth. At this time, it is necessary to wipe the dust on the surface of the tile, and the dust in the gap needs to be wiped as much as possible. In this way, we have finished the cracks in the tiles.

The mold in the cracks of the ceramic tiles turns black, and the place where there is water exists for a long time. In addition, there is some material in the crevices of the tiles that is loose, so mildew and blackening in this position appear over time.

This is especially serious for our toilets and kitchens. Therefore, now all major families choose to treat the gaps of toilet tiles and kitchen tiles, so that the effect is better. After the tile seam is completed, it can be said that it will be used for more than ten seconds, and there will be basically no problems.

This also avoids the occurrence of powdering of the internal pore size of the tile. Another point that is more beneficial to us is that the aperture of ceramic tiles is added, and there will be no dirty situation for a period of time.

If the caulk of the tile is dirty, it can be refilled, but you have to dispose of the dirty part and refill it, which will take more time, so you must be patient.

Of course, it will make the home particularly beautiful, and it will also make the home particularly clean, you can go to some professional people, don't do it yourself.

You can fill it again, but you have to clean out all the things in the original caulk before you can fill in the new thing, which will be more beautiful.

Wash it with a rag. A rag can wipe some dirty things on the surface clean.

You can remove it and refill it again, which can make the home look more beautiful, but it is a little more troublesome.

It should be cleaned, you can buy some cleaning tablets online, you can also buy some cleaning agents, so that these gaps can be cleaned very clean.

You can clean the original gaps in your home and apply the sewing agent again. Maybe in the early days, everyone used caulk, and most of the caulk was white, and it was very beautiful when it first came up.

However, after a period of use, the white caulk will fall off, which will easily breed bacteria, and it will store a lot of dirt, which is also aesthetically insufficient.

At this time, you can consider re-caulking, but now you don't use caulk anymore. The beauty sewing agent is a new type of composite material, with more colors, and you can choose one that is similar to the color of the tile. Moreover, the sewing agent does not absorb water, does not change color when cleaned, and the key is that the use method is very simple, and the master can operate it at home without the need for the master.

You can reapply all the crevices in your home with a sewing agent, so that you can change the moldy phenomenon.

Generally speaking, when buying sewing agents, different glues will be matched according to actual needs, if necessary, you can use a glue with stronger viscosity, so that the filling effect is better and it is not easy to fall off.

If you need glue, you can consult the store or customer at the time of purchase. There are many colors of sewing agents, and the quality of the products is uneven, and the difference is very large.

However, the amount of sewing agent used is not much, so when purchasing, you should try to choose those products with a high safety factor, a relatively high environmental protection coefficient, and guaranteed quality.

This avoids the release of harmful substances, after all, no one will actually move out of the house when they re-caulk, and they will still live at home. If the sewing agent will release a large number of harmful substances, then these harmful substances will be absorbed into the body, which will cause a lot of harm to the body.

If you get rid of the previous one, you can reapply the caulk, and I've done it at home, which is very convenient.

If the caulk is already dirty, you can get the caulk out first and then reapply the caulk.

You can do it all over again, but be careful to clean up the original one before refilling it.

I think it's possible to fill in this case again, but be sure to pay attention to the pro.

Yes, clean the inside of the gap and fill it again.

Once you've cleaned up the previous caulk, you can refill it again.

You can refill it by cleaning it up first and then using a new one.

In life, we often encounter the situation that the caulk of the tiles at home will become dirty, so what should we do in this case? Do you want to fill it all in again? Or do you use a sewing agent to cover it directly underneath?

Personally, I think that if it is very, very dirty, then it needs to be filled again, and if it is not so dirty, in fact, it is okay to cover it with a layer of sewing agent.

If you're going to refill your home with caulk, you'll first need to clean up the dirty stuff. At this time, you can use a utility knife or other gadgets to clean up the dirt little by little. This requires a lot of patience to do, because if you don't clean it up, if you just fill it in again, the new caulk may also be dirty, and if it accumulates little by little, it will definitely get dirtier and harder to clean in the end.

So if your home is not so dirty, it will be recommended that you use beauty sewing agent. The grout is a more advanced version of the regular tile grout. It is more hygienic and safer, and now there will be a little more people using sewing agents.

Because it is an upgraded product, the functions are strengthened in all aspects.

In addition, whether it is caulk or beauty sewing agent, in order to prevent too much trouble in the future, the most important thing is to maintain the hygiene of the home at all times. Dusty areas in the home need to be cleaned frequently, and pay attention to the usual crevices and corners when mopping the floor with a mop. Otherwise, if you don't pay attention to good maintenance, the caulk will still become dirty in the future.

Yes, you need to wipe it with a brush dipped in acidic detergent before filling, and then fill it after it is clean.

It can definitely be refilled, but it's better to find a professional to deal with it, if you get it yourself, it won't work well.

This needs to get the caulk out of the tiles at home, and then fill it again, and it is not okay not to get it down.

The original caulk can be cleaned and re-jointed, and it can be filled again.

In this case, the previous one must be cleared and refilled, otherwise it is still not beautiful.

Yes, just scrape off the dirty ones, and then just make up the caulk.

You can refill it with a sewing agent. Of course, before refilling, you should remove the original one, so that it looks good.

Yes, it doesn't matter if it's a little dirty, caulk generally has a long shelf life.

Remove the original one and re-re-hook it. Beauty sewing agent (full fill type) is a high-end home decoration product, suitable for tile tiles, mosaics, stone and other gap beautification.