Floor heating has not been used for several years, and if you use it again, can you still use it aft

Floor heating has not been used for several years, if it has been used before, there is still water in it, in the start, it is best to replace the water from the new, clean up the scale in the pipe, and check the wall-hung boiler to ignite it!

Floor heating that has not been used for several years, first of all, we must find professional personnel to clean the floor heating before it can be used again, if it is not cleaned for a long time, it is easy to block.

This situation can also be used, for patients often use, can have a better warmth effect, you can use water to try the effect first.

Summary. Floor heating has not been used for ten years, whether it can still be used depends on the condition of floor heating, if there is no embrittlement, powdering and other phenomena can be used, if there has been an appeal, it can no longer be used.

2. The service life of floor heating can not be generalized, because floor heating is composed of multiple equipment, such as gas wall-hung boiler, coil, water collector, reflective film, card nail, etc., the service life of different equipment is not the same, and the service life of different brands of floor heating is not the same.

After the floor heating is installed, it has not been used for more than ten years, can it still be used later?

Hello, I have seen your question and am sorting out the answer, please wait a while

Floor heating has not been used for ten years, whether it can still be used depends on the condition of floor heating, if there is no embrittlement, powdering and other phenomena can be used, if there has been an appeal, it can no longer be used. 2. The service life of floor heating can not be generalized, because floor heating is composed of multiple equipment, such as gas wall-hung boiler, coil, water collector, reflective film, card nail, etc., the service life of different equipment is not the same, and the service life of different brands of floor heating is not the same.

2. Service life of floor heating equipment 1. The service life of the gas wall-hung boiler in floor heating is about 10 to 15 years; The service life of the manifold is about ten years, and some products can reach 15 years; The service life of all kinds of valves is generally about eight years, and some products can reach up to about ten years. 2. The service life of floor heating equipment is also related to the usual maintenance, if the old parts are replaced in time and cleaned regularly, then the service life of floor heating can reach more than 50 years.

Thank you, I hope to give a thumbs up.

The upstairs water leaked to my house, the ceiling of my house was soaked, and the ground was also water, which did not affect the floor heating pipeline.

Hello, if you soak in water for a long time, it will be affected.

Thank you. From the first point of view, the embrittlement and powdering of floor heating pipelines, do you want to pry open the ground or look at the pipelines in the wall.

Then you need to ask a professional to carry out the survey.

Thank you, I hope to give a thumbs up.

If it is not used in the second year, all the water in the coil should be blown out with an air compressor to avoid freezing and cracking of the pipeline due to low room temperature.

If you don't use the underfloor heating for a long time, you have to drain the water. If you do not use underfloor heating in winter, once the temperature drops very low, the water in the underfloor heating pipe will easily expand, and in serious cases, it will break, so for the sake of safety, when the underfloor heating is not used for a long time in winter, the water inside must be emptied.

How to clean underfloor heating.

The use of chemical agents to clean floor heating, I believe that many people will use chemical agents to soak, and then achieve the effect of cleaning. However, in the process of using chemical agents, due to the soaking of chemical agents, some dirt on the equipment in the pipeline will fall down, so that the pipeline will be smoother and there will be no blockage.

Cleaning pipes in this way is not only more effective, but also very safe. The main thing is that the cleaning effect after soaking in chemical agents can be completely clean, so most people will use this method for cleaning.

Summary. Hello dear, if it is not seriously damaged, there is no need to change, the floor heating pipe will be used every winter because it needs to be heated by water every winter. Twenty years of floor heating pipes shows that it has been working for twenty years, even if the material is very good, there must be loss.

However, in general, the loss of underfloor heating pipes is necessary and harmless. I hope mine is helpful to you, please give me a thumbs up!

Hello dear, if the mold is not seriously damaged, there is no need to change, the floor heating pipe needs water heating every winter, so it will be used every winter. Twenty years of underfloor heating pipes shows that it has been working for twenty years, even if the material is very good and trustworthy, the underfloor heating pipes must be lost. However, once you are able to say that the loss of underfloor heating pipes is necessary and harmless.

I hope mine is helpful to you, please give me a thumbs up!

Can you fix the floor heating if it is broken?

Yes, kiss.

Once the floor heating is damaged, it is necessary to contact the property company or the stupid one to call the heating company in time, so that professional personnel can repair the floor heating.

We have our own underfloor heating in the countryside here.

What is that like, dear.

Use a wrench to open the filter, clean the filter inside, and install it back from the new one, or you can find a professional to clean it.

You can find a professional to help.

Because there are a lot of impurities such as sediment and rust on the inner wall of our heating pipes. During normal hot water operation, these impurities cannot be removed due to the low water flow. If high-pressure cleaning is used, these impurities will be directly washed away, resulting in the appearance of black dirty water.

The second reason is indoor filtration issues. For the convenience of many households, they remove the filter cartridge for indoor or common pipe diameters. This causes a lot of impurities to enter our room with the water, so when they are finally released, they are all black dirty water.

The third point is that the floor heating at home is dirty after a period of use, and in the normal process of floor heating water circulation, impurities can not be brought out, and only through high-pressure water can these impurities be washed out of the pipe.

Need. This can greatly reduce the precipitation of scale in the pipe, and the heating company will empty the water in the heating system to provide conditions for efficient heating in the coming year.

Underfloor heating is not used for a long time, and the correct way to do it is:

1. Drain the original water source in the pipeline and flush the pipe network (including the heating coil).

2. Refill the system with clean water and turn on the boiler heating, stop heating when the water temperature is heated to 55, manually open the exhaust device on the water collector, and discharge the air separated from the water out of the system.

3. After the exhaust work is completed, close all the valves in the heating system, and close the gas boiler, let the water cool down gradually, and keep the water in the pipe network of the system until the next heating period begins.