How much does it cost to clean up the carbon deposits of Haval H6, and how often does the carbon dep

Hello! Generally, it takes about 500-600 yuan to clean the engine carbon deposit, and it is recommended that the car is about 4-60,000 kilometers to clean the engine carbon deposit, you can refer to it.

The residue of substances in the fuel injector, throttle, oil pipeline, spark plug, cylinder head, inner wall and other parts caused by insufficient combustion of gasoline in the cylinder, and then the black gum produced by the repeated high temperature action of the engine is called carbon deposit.

One of the reasons for carbon deposition is that the fuel is not completely burned and adheres to various parts of the engine, which can form carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through the exhaust gas after burning with the fuel at high temperature.

The increase in carbon deposits in the car will lead to insufficient combustion of the engine, resulting in an increase in fuel consumption and a long time when the car failure light is on.

Ways to slow down the formation of carbon deposits:

Use high-quality fuel. Because the main components of carbon deposits are wax and colloidal deposition in the fuel, the lower the colloidal content in the fuel, the better. But we can't change the quality of the fuel, but we can choose not to add unidentified cheap fuel.

2.Avoid driving at low speeds for long periods of time. If necessary, the high speed can be pulled at a regular time. The principle of removing carbon deposits at a high speed is to speed up the airflow, which can carry away a small amount of carbon deposits that are not firmly attached. The combustion temperature is increased so that part of the carbon deposits in the cylinder are burned.

Carbon deposition hazards. If the carbon deposit is not cleaned for a long time, the operation of the whole vehicle will be caused, the internal channel of the engine will be blocked by carbon deposits, the engine power will become worse, and the occurrence of fuel consumption, abnormal engine noise, and unstable idle speed will occur, thereby reducing the power of the automobile engine, increasing fuel consumption, and causing the combustion rate to be too low. If you do not clean up the carbon deposit in time, it will not only cause a certain degree of harm to the car, but also the harm to the environment, modern society pays attention to energy conservation and emission reduction, and exhaust emissions must not exceed the standard, so we should pay attention to this problem.

Usually 5000 kilometers with effective PNF fuel additives to clean the overall oil circuit carbon deposits, a long time not to clean up the carbon deposits will cause the operation of the whole vehicle, so that the internal channel of the engine is blocked by carbon deposits, the internal fuel injection of the car is not smooth, so that the engine power becomes poor, thereby reducing the power of the car engine, increasing fuel consumption, and the combustion rate is too low.

The cleaning of Haval H6 carbon deposits is divided into engine combustion chamber cleaning, noise bench, inlet cleaning, three-way catalytic cleaning, and fuel injector cleaning. If you have a detailed set, it will cost you $300-80. In fact, it is possible to add a type of carbon deposition remover, which is highly effective and safe.

It can also have an effective effect of removing carbon deposits.

Generally speaking, carbon deposits will be caused all the time, we do not need to remove every maintenance, nor can we always ignore it, if the car can be cleared once for 3-40,000 kilometers, if it is often performed on congested roads or more speeding cars, it is proposed to clear 2-30,000 kilometers once. Naturally, different car engines also have a certain period of time code travel adjustment for different conditions.

Because 80% of China's automotive gasoline adopts catalytic reaction fission refinery processing technology, the disadvantage is that the octane number of gasoline manufactured by this processing technology is low, in order to completely solve this problem, it is necessary to add a lot of cyclohexanol and paraxylene, and these two components are easy to cause collagen fibers, that is, carbon deposition after the combustion of automotive gasoline ethanol.

Millions of car purchase subsidies.

The cleaning of Haval H6 carbon deposits can be divided into combustion chamber cleaning, air intake system cleaning, three-way catalytic cleaning, and nozzle cleaning. If it becomes a silver sparrow, 300-800 yuan. In fact, by adding carbon scavengers, it can be safe for a long time. It can also have a good effect of removing carbon deposits.

In general, carbon deposits occur all the time. We don't need to clean it every time we maintain it, and we can't ignore it all the time. If Fengdanguo often drives high-speed, 3-40,000 kilometers of Zen can be cleaned once.

If you often use traffic jams or idle driving, it is recommended to wash every 20-30,000 kilometers. Of course, different engines have certain cycle adjustments for different situations.

Since 80% of China's gasoline adopts the catalytic fission refining process, the disadvantage is that the gasoline produced by this process has a low octane number. In order to solve this problem, large amounts of olefins and aromatics need to be added, and these two substances are prone to the formation of gums, i.e., carbon deposits, after incomplete combustion of gasoline.

How does carbon deposition come about?

Carbon deposition refers to the colloidal substance similar to oil sludge produced by fuel and oil vapor that escapes into the combustion chamber when it cannot be completely burned, and these substances adhere to almost any part of the engine room, including intake and exhaust valves, spark plugs, fuel injectors, piston tops, etc., after continuous accumulation, coupled with the action of repeated high temperatures of the engine, and finally form carbon deposits similar to coal.

How to judge the organic carbon of a car? When the car has the following conditions, it can be judged that the carbon deposition of the car is more serious:

1. It is not easy to start when the cold car is ignited many times, and it is normal when the car is hot;

2. The engine idle speed is unstable, and the speed is high and low;

3. The driving feeling is weak and stuffy, especially when overtaking, and the speed response is slow, which is very different from the new car;

4. The exhaust of the car is pungent and the emission exceeds the standard;

5. The fuel consumption of the car has increased a lot compared with before.

How to clean up the best way to clean up carbon deposits in automobiles.

Generally, the commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This method is very direct and rude, but it is generally sent to the 4S store for disassembly, the dismantling of the engine is more complicated, no matter what parts will be more or less affected by its performance every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, the hanging bottle is to discharge the cleaning agent into the air intake, dilute and soften the carbon deposit to turn it into a slurry, and then burn it from the cylinder to discharge. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

One of the causes of carbon deposition is that the fuel burns insufficiently, which adheres to various parts of the engine and forms carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives are good for high bending, such as PNF stock solution, which is not corrosive, will not clog the ternary, and has high safety.

Cleaning up carbon deposits is about 400 700 yuan, depending on the vehicle, different places, ** is also different. The most important step is to use detergent to hit the combustion chamber to extract the waste liquid and clean the carbon deposits after a chemical reaction.

The engine has been working for a long time and there is more or less carbon deposit, a certain degree of carbon deposit is allowed, and only excessive amount will affect the performance. When you find that the cold car needs to start normally many times, the acceleration is slow and the acceleration is weak, the exhaust is pungent and the fuel consumption has increased compared to the past, then the carbon deposit of the engine is already a bit serious and needs to be cleaned up.

Hello throttle to clear carbon deposits, 4S stores charge 200-800 yuan, and the cleaning cycle is generally about 20,000 kilometers. The cleaning of carbon deposits inside the engine is more complicated, and the 4S shop charges more than 1,000 yuan, and the cleaning cycle is about 30,000 kilometers.