The practice of small bags, how to make small bags

A small bag carries the dreams of countless craftsmen, and the following shares an example of hand-made small card holders, and the production process of the rest of the bags is similar to this.

Prepare a piece of colored paper, solid glue, scissors.

Fold the square of confetti in half into a double triangle, then fold the sides in half with the middle crease as the center.

Fold the corners of both sides in half, there are exactly six vertical marks here, and just two marks on each side are folded in half.

Again, all the colored paper will have more traces, such as the two sides of the picture folded in half, a small white triangle in the colored paper (there are traces of triangles on both sides, I am afraid that everyone can not see clearly, so one side uses a triangle to demonstrate), the sharp corners of the colored paper Chi Heng book are just folded in half to the sharp corners of the white triangle.

Put away the long strip traces that were originally folded, which is the bottom of the bag.

Turn the previous step to the bottom and fold the top triangle in half once.

Then the colored paper, the two sides along the traces are collected inside.

The sharp corners of the top are also folded in half along the trace.

The other side is also done well, pay attention to the bag block clever bottom code macro to be optimistic, otherwise it is easy to fold it together, so it can't stand up!

Next, make the hand part and cut two rectangular pieces of colored paper.

Fold it in half once, then open both sides and fold it in half once, and finally apply it with solid glue and stick it well, leaving a little on each side and not coating it first.

Finally, apply solid glue on both sides, and then look at the proportion of the bag, stick it on both sides, and a origami bag is complete!

Introducing the weaving method of a bag, this bag is a combination of crochet, the body is a stick knit, and the strap is a hook.

First, from the bottom of the weaving, the initial 12 needles, weaving back and forth under the needle, weaving a row after adding needles, each side plus a needle, add two times, a total of four needles, and then weave back and forth needles 52 after the needle, the opposite of adding needles. The bottom is 36*10cm.

Second, pick 152 needles along the bottom edge and weave the first fancy. Each flower is 8 needles, 3 needles, pick 2 needles not to weave, then 3 needles to needle, and so on, the same method to weave 3 rows after weaving back and forth under the needle 3 times. Knitted 12cm.

Third, the second flower is to weave 3 rows of needles, every 3 needles at the bottom of the lead line to pick an auspicious good needle and weave with the top needle. Knitted 3cm. Fourth, weave three back and forth needles.

Fifth, weave the third fancy, 2 lines of needles, then 2 needles and 1 needle, plus 1 needle a total of one line, and then weave 2 rows of needles, weaving 2cm.

Sixth, weave 3 back and forth needles, leaving a rental hollow eye with a belt. Leave 4 eyes on each side of the bag, the distance is 4cm, and then weave 3 back and forth to close the edge. The body is finished, with a total height of 22cm.

Seventh, hook the bag, after the hook is good, just put it on in the eyes of the left. This is a spiral hook method,

How to make a bag:

1. Pick up the green colored paper, fold it in half along one of the diagonal lines and spread it out.

2. Fold in half along another diagonal.

3. Fold the orange corners of the icon to the center point.

4. Fold both sides to the center point again.

5. Spread out the colored paper.

6. Fold the bottom up about 1 cm.

7. Fold the left and right corners of the orange icon to the two creases marked with orange arrows.

8. Spread out the colored paper.

9. The left and right corners of the orange icon are folded to the middle two points respectively.

10. The left and right sides are folded down again along the two orange creases of the icon above.

11. Press the top into the shape of the following figure according to the crease.

12. Fold the upper corners downward.

13. The other end is also pressed according to the crease.

14. Fold the lower corners upwards.

15. Fold the left and right sides to the center line.

<>17. Tear off the white part of the double-sided tape and paste it upwards, so that the main body of the bag comes out.

19. Tear off the white part of the double-sided tape and paste it on the top of the main body of the bag, so that the bag is finished.

The steps to make a packet are as follows:

1. Draw the version of the card pack to be made, there are ready-made acrylic versions sold on the Internet, and you can also draw the cardboard version according to your own ideas.

2. Prepare the skin, the skin should be large enough, and the thickness should be selected according to personal preference, and then the version is placed on the skin, and the outline of the version should be drawn on the leather with an awl or a pencil.

3. Cut with a leather cutter or utility knife according to the shape drawn, and the cutting process should be. As smooth as possible, you can also rely on the acrylic version as a ruler to cut, and the rounded corners can be cut with a universal ruler (suitable for beginners).

4. After cutting, the cut leather will be edged and pressed in some places; If you like a different style, you don't have to bend the edges.

5. Install the snap button according to the positioning point on the version. When drawing, you must pay attention to the details and do not leave the position of the snap button.

6. According to the positioning line on the version, put each piece of material in the corresponding position, and add it up with a clip after bonding, so that the glue can be bonded more firmly.

7. After clamping and gluing firmly, you can sew the thread while chopping, and the position is carried out according to the position set by the version, and the small card pack is completed after the sewing is completed.

DIY friends at work must recommend everyone this cloth bag handmade tutorial, this handmade cloth bag color selection is very small and fresh, according to the practice of this handmade cloth bag made of the bento bag is quite good, easy to learn environmental protection and fashion, practical and beautiful.

The method of folding small bags is as follows:

1. First of all, we take a square of origami, fold the square origami into the second step according to the diagram, fold the four corners to the center point of the square, open one corner on the right, turn the open origami over, fold the upper and lower sides of the origami paper in half to the middle line.

2. We fold the origami just now, and fold the origami along the intersection of the creases to the two corners; Pinch the folded part and fold it inward according to the crease made in the previous step; Fold the upper corners downward; Glue the folded parts on both sides of the bucket, and here, the body part is complete! Let's make the strap part.

3. Prepare a slender strip of paper; Fold the paper in half in half; Fold the folded strip of paper in half again; Select two places to bend and fix. After the strap part is completed, we glue the strap and the body of the bag, and a coin purse is ready!

The steps to make a love bag are as follows:

1. Take out the lead square paper in the air. Start by folding a cross. Fold each side towards the middle. The whole is folded in half along the middle. (The opening is now upward).

2. Fold both sides outward. The middle part is folded inward with two small corners, and the lower part is turned upwards. The bottom is folded into two corners. Tighten inward along the crease.

3. Turn it over, glue it and stick it, and the other side is the same! Remove the small strips. Fold in half along the middle. Glue it to the love packet.

The method of folding small bags is as follows:

1. First of all, we take a square of origami, fold the square origami into the second step according to the diagram, fold the four good angles to the center point of the square, open one corner on the right, turn the open origami over, take the lead and fold the upper and lower sides of the origami to the middle line. 2. We fold the origami just now, the origami paper that has just been folded, fold the folded part along the intersection of the creases, pinch the folded part, fold it inward according to the creases made in the previous step, fold the corners on the top of the bucket downward, and glue the folded parts on both sides. Let's make the strap part.

3. Prepare a slender strip of paper, fold the paper in half in half, fold the folded paper in half again, select two places to bend and fix. After the strap part is completed, we glue the strap and the body of the bag, and a coin purse is ready!

The steps to make a love bag are as follows:

1. Take out the square paper. Start by folding a cross. Fold each side towards the middle. The whole is folded in half along the middle. (The opening is now upward).

2. Fold both sides outward. The middle part is folded inward with two small corners, and the lower part is turned upwards. The bottom is folded into two corners. Tighten inward along the crease.

3. Turn it over, glue it and stick it, and the other side is the same! Remove the small strips. Fold in half along the middle. Glue it to the love packet.

The handmade small bag is made as follows:

Material introduction: The main material is a printed canvas, and the canvas used to make this bag is the best. The main body balances the stuffy material, which needs two copies of face and two parts. Size: 47 cm 26 cm.

The bottom material of the bag is one copy of the face, and you can cut the paper shape according to the size on the ** and then cut the fabric.

8 air-closed eyes with an inner diameter of 1 cm and a snap button are also required.

The length of the tape is meters, the width is 4 cm, and the reverse side is ironed with a 60-gram non-woven lining.

Steps: First, fold the pleats on 4 pieces of body material. Find the centerline of the material, 6 cm from each side of the centerline, and close a 4 cm pleat. Then close a 4 cm pleat an interval of 1 cm, and 4 pleats on a piece of material.

The pleats are folded in half by 4 cm and then sewn a one-centimeter-long segment with a sewing locomotive.

Finally, press down the folds and fix the sewing.

Next, the front of the face and the lining are stacked opposite each other, and the two sides of the car are respectively on the car. Then bend and close the bottom of the bag.

The next step is to turn the face to the front, stuff the lining into the face, align the side seams and side seams, and then wrap the mouth with a hemming tape.

The next step is to nail the air eye at the mouth of the bag, and the air hole is 4 on each side. Take the side seam as the center, measure 5 cm on each side and nail one at a distance of 5 cm.

Finally, put on the finished bag belt, and the width of the bag belt after making it is 1 cm.

The materials and methods of this bag are very simple, no need to iron cotton, no need to zipper, is a lightweight bag. It can be carried, carried, and carried on one shoulder.

Materials: cotton, cutting knife, needle and thread, sewing machine, water elimination pen, ruler, zipper.

Specific steps: Two pieces of Zen in each of the table cloth. Two sides of the cloth (the length is the length of the left and right sides of the bag and the bottom edge). The size of my cut is 20 cm high and 18 cm wide, and the front of the edge cloth is sewn opposite to each other.

Stitch another piece of table cloth.

Turn it over, and the lining is sewn together like the table cloth.

Put the front of the table cloth bag and the inner cloth bag relatively well, each side is right, sewn well, leave the reverse mouth, and turn it out from the reverse mouth to finish.

Sewn a zipper, hand sew to the mouth of the bag, sew buckles on both sides of the bag, sew lace, and it's done.

Bag Summary: This handbag is made by simple cutting and stitching. Finally, attach the lace ribbon decoration, add handles, and of course, hang a small fabric toy, and you can pack your things and go out.