What are the points that need to be paid attention to when you want to seal windows on the balcony?

In the selection of styles, you need to buy according to your own style, this material has more colors, and there are more fans with ventilation, so as to design the actual effect of suitable living space. In terms of window pattern design, fixed floor-to-ceiling windows can be designed for casement windows, which can ensure good lighting and wide field of vision. The sealing performance of the fixed window is the best, because it is not opened, so there is basically no need to consider the influence of the weight of the sash on the opening and closing, and the area of the sash can be relatively large.

The process of titanium alloy is higher than the first two, its sealing strip, heat insulation effect, and airtightness are much higher than the first two, but it is also relatively expensive.

After <>the balcony is closed, there is an extra layer of windows to block dust, which effectively blocks the invasion of sand, dust and rain, and the indoor hygiene condition is better than that of the residents who have not sealed the balcony, and they can also rest assured that they can dry their clothes without worrying about the clothes that have just been dried by the wind. When sealing the balcony, pay attention to the tightness of the installation to prevent the occurrence of air and water seepage. The lower part of the window sash is the most prone to water seepage, and a certain gap will be reserved under the window frame during installation and filled with a special sealant.

If the drainage and waterproofing treatment is not good, water accumulation and leakage will occur.

Before sealing the balcony, be sure to understand the load-bearing structure of the balcony. Old-fashioned houses mostly have a door and window structure between the room and the balcony, and the doors and windows can be removed, but the half wall under the window is generally not allowed to be removed, and this half wall is a counterweight wall. If it is a high-rise house, it is recommended to reinforce the railing and install the windows on the inside of the railing to ensure safety.

The insulation layer should be retained when the railing is dismantled, and the waterproof glue and the building insulation benzene board should not be damaged.

Window sealing patternNowadays, the developer's houses are getting higher and higher, so the safety issue cannot be ignored. The balcony generally has its own railing and guardrail, and it is generally recommended not to remove it if there are no special requirements. At present, the market is uneven in sealing balconies, ranging from more than 150 yuan in small doors and windows to more than 700 yuan for regular brands.

Pay attention to the thermal insulation decoration balcony should pay attention to thermal insulation, residential balcony, basically do not consider its thermal insulation problem when building, this is because there is a balcony door and window in the balcony can play the role of thermal insulation. However, many residents who have renovated their balconies have removed the doors and windows of the balcony considering the impact of the balcony doors and windows on the whole room. To do a good job of thermal insulation of the balcony, you can consider using polystyrene board to make an insulation layer below the balcony window, or you can consider using rock wool to make an insulation layer below the balcony window, and use materials with good thermal insulation effect to form the insulation layer of the balcony wall to isolate the exchange of indoor and outdoor hot and cold air.

The first is glass. To see if the glass is translucent and neat, free of bubbles and scratches. There should be no significant ripples when viewed from the side of the glass.

It should be noted that if you install frosted glass, pay attention to the frosted side facing inwards to prevent the frosted glass from becoming transparent when it rains. This is followed by the frame of the balcony. Check to see if the balcony frame is sliding smoothly.

The smoothness of the push and pull depends on whether the frame is horizontal and vertical. You can bring a ruler or a bottle of mineral water to see if the frame remains level. Third, check the balcony silicone.

Silicone is a must and a very important part of balcony waterproofing. A large part of balcony leakage is caused by leakage of silicone or the use of low-quality silicone. Therefore, if you want the balcony to have a good waterproof function, you need to not only use silicone indoors, but also need to be outdoors.

In addition, the sealing of balcony glass should be made of silicone instead of leather strips as much as possible. This is because, although the leather strip is beautiful, it is prone to thermal expansion and cold contraction. Silicone, on the other hand, is not easy to deform and is more practical.

Playing silicone requires a solid level of skill. When we inspect the silicone, we can check whether the silicone is straight, whether the thickness is consistent, and whether the joint is properly handled. Finally, it is also necessary to pay attention to the position of the columns.

Generally speaking, if the column is too close or too far away, it means that the dimensional measurement is not accurate, and it is easy for rainwater to seep into the balcony from the column, so you need to pay more attention.

1.It is best to use broken bridge aluminum, which has good sound and heat insulation effect.

2.Ask in advance about unemployed, the direction of opening the window, and seal the balcony need to communicate with the property in advance.

3.Window seals must be screened, otherwise mosquitoes will be miserable.