How to construct the cement pouring on the roof of the sun room

SunroomRoof cement pouring construction skills:

1. Concrete pre-embedded steel structure base.

2. The square steel and the base are fixed.

3. The square steel brackets are fixed with each other.

4. The blank space between the pillars is fixed with glass glue.

5. On the sunny roof, there should be 8 10 mm seams between the glass and the glass.

6. Caulking with silicone structure sealant, and the thickness of caulking glue is not less than 6 mm and not more than 10 mm.

Requirements: 1. The formwork, steel bars, embedded iron parts and pipelines of the pouring concrete layer have all been installed, and they have passed the inspection, met the design requirements and completed the concealment and pre-inspection procedures.

2. The shelves and walkways for pouring concrete have been erected and passed the inspection.

3. Cement, sand, stone and admixtures have been inspected to meet the requirements of relevant standards, and the concrete mix ratio has been issued in the test.

Notices.

The material of cement pouring construction on the roof of the sun room is generally cement mortar, on the ground, using the proportion of sand and gravel with artificial proportion, and then put it into the mixer for mixing, and then with the help of manual relay, the mortar is transported to the top floor. It is recommended to understand the 125 non-broken bridge sun room of the honorable doors and windows, the product is equipped with an arc top beam, and can be equipped with a lamp style, and the top surface is equipped with 5+5 laminated glass and 6+6 laminated glass to choose from. [Click to view more brand news].

Now the roof of the sun room cement pouring more and more, if the pouring is not cured, it may lead to cracks, the later stage may lead to water leakage, so after the concrete pouring is completed, the necessary maintenance needs to be carried out, the use of 48kw concrete curing steam generator can speed up the concrete solidification rate, improve the quality of the concrete structure. Then the following matters should be paid attention to when pouring cement on the roof of the sun room:

The first point: within 12 hours after the cement on the roof of the sun room is poured, it should be covered with oilcloth or film and sprinkled with water for maintenance.

The second point: the cement floor should be protected for at least 1 day before the wall can be built, if the temperature is lower than 20, it needs to be maintained for 28 days before continuing to cover the upper layer.

The third point: spring and autumn maintenance, watering 2 4 times a day, summer a according to the situation appropriate increase, if the temperature is lower than 20, winter temperature is lower than 5 should not be watered maintenance.

If you want to know more about the sun room, it is recommended to consult the Zunshang doors and windows. Founded in 2004, Zunshang Doors and Windows is a large and medium-sized aluminum alloy door and window enterprise integrating R&D, production, sales and service. Since its establishment nearly 20 years ago, the company has been focusing on the R&D and production of high-end products such as aluminum alloy system doors and windows, sun rooms, etc., with 700+ brand stores in the country, and its products are exported to more than 30 provinces, autonomous regions, municipalities directly under the central government and Southeast Asia.

The products are mainly used in high-end home decoration, villas, clubs, office buildings and other places.

Hello, it is not possible to pour cement on the original sun room, and the cement must be poured in the sun room with concrete formwork, and it will not work if there is no one. Construction skills of cement pouring on the roof of the sunshine room: 1. Concrete embedded steel structure base.

2. The square steel and the base are fixed. 3. The square steel brackets are fixed with each other. 4. The blank space between the pillars is fixed with glass glue.

Friend code 5, sunny roof, glass and glass should be left 8 10 mm seam. 6. Use silicone structure sealant caulking, and the thickness of the caulking glue is not less than 6 mm and not more than 10 mm. Condition 1: The formwork, embedded iron parts and pipelines of the pouring concrete layer have all been installed, and they have passed the inspection, met the design requirements and completed the concealment and pre-inspection procedures.

2. The shelves and walkways for pouring concrete have been erected and passed the inspection. 3. Cement, sand, stone and admixtures have been inspected to meet the requirements of relevant standards, and the concrete mix ratio notice has been issued by the test and the world. Hope it helps

Legal analysis: To build a sun room on the roof, it must be approved by the urban construction planning department, and the construction can only be carried out after obtaining the planning permit, otherwise, it is an illegal act, and it will be fined and demolished by the urban construction authority in accordance with the law. The sun room is a building respected by people who pursue nature and fashion at home and abroad.

The sun room is widely researched in North China and Shanghai, and Shengli Industry needs to be designed and built according to the needs of the place and personal hobbies, and the interior layout can be decorated according to personal preferences. The balcony or terrace sunroom is located in the whole house, so visual connectivity is very important. It needs to be considered to be consistent with the overall style of the building, and at the same time the overall color tone should be consistent throughout the dust.

Legal basis: Urban and Rural Planning Law of the People's Republic of China Article 40 Where buildings, structures, roads, pipelines and other projects are constructed in urban or town planning areas, the construction unit or individual shall apply to the urban and rural planning department of the city or county or the town people of the province, autonomous region or municipality directly under the Central Government for a planning permit for construction projects.

It is feasible to do, but it is not recommended.

The concept of the sun room is to use a large area of light-transmitting materials to enhance the lighting effect in the area, and the cement board is a light-opaque building material, and the hand-made top with a cement roof will inevitably affect the lighting.

In addition, it is also necessary to take into account the load capacity of the façade of the sunroom, the cement slab is relatively thick, and the façade material and skeleton of the sunroom must be able to bear the weight of the top, and also take into account the impact of snow and water.

The cement board for the sun roof also needs to be waterproof and potato lead resistant. The sunroom is located in an outdoor environment and is susceptible to rainwater erosion. Therefore, before installing the cement board, waterproof paint can be used to increase its waterproof performance, and a drainage pipe can be added at the top to avoid rainwater from penetrating into the room.

You can use cement slab as the top of the sunroom, but it's not the best solution! Because the cement board is impermeable, if it is sealed, the sunlight cannot pour Sun Wang in, what kind of sun room is this? Moreover, the cement slab is heavier, which is not suitable for high-rise buildings or parts that need to be hoisted.

Generally speaking, the sun room is made of high-transmittance glass or PC endurance board, which is transparent and not hot!

Summary. The pouring roof of the sun room generally adopts the concrete process, which is often called pouring prefabricated slab, which has the characteristics of light weight, high strength, strong durability and good thermal insulation. The prefabricated roof is cured and firmly bonded to the house and has a high degree of robustness.

However, if the construction is improper, such as improper concrete proportion, improper maintenance, etc., it will affect the firmness. Therefore, when pouring the roof of the sunshine room, it is necessary to choose a professional construction team to ensure the solidity and safety of the poured roof.

Can you add, I don't quite understand it.

The pouring roof of the sun room generally adopts concrete technology, often called pouring prefabricated slab, which has the characteristics of light weight, high strength, strong durability, high thermal insulation, etc. The prefabricated roof is cured and firmly bonded to the house and has a high degree of robustness. However, if the construction is improper, such as improper concrete proportion, improper maintenance, etc., it will affect the firmness.

Therefore, when pouring the roof of the sunshine room, it is necessary to choose a professional construction team to ensure the solidity and safety of the congregation of the pouring roof.