How to solve the problem of cold balcony, how to prevent cold if the balcony is too cold

There should be two kinds of thermal insulation: external wall insulation and external wall internal insulation.

Basically, extruded polystyrene board is used.

Anchor to the wall, then hang the net plastering.

If it is an old house, it is highly recommended to add a layer of insulation to the balcony.

Old houses, balcony walls and floors are often a thin prefabricated panel.

It does not block the cold in winter, and the heat is permeable in summer, and sometimes it seeps rain. If it is an old house, it is recommended to fill the gaps first, then do the wall and ground waterproofing, and then do various different types of insulation layers (the ground is not used), and finally the surface decoration. The floor only needs to be thickened, leveled and tiled or paved.

After the transformation, it must be much better.

Northern regions in general.

Almost 90% of the new houses will not be closed, and the balcony is generally half an area, which is also a loophole in the policy, and the owners can also enjoy the benefits, killing two birds with one stone.

Generally, most of the balconies that are not closed have thermal insulation walls, and the thermal insulation has lost its meaning after the closed balcony, and at the same time, in order to paste tiles well, the general closed balcony is to remove the thermal insulation wall.

Focus on the insulation walls on both sides of the closed balcony, that is, the insulation walls on both sides of the window frame, which many people here have neglected.

First of all, remove the insulation wall, if there are insulation walls on both sides of the closed window, when removing the insulation first, you must let the person responsible for sealing the balcony.

The workers draw the scope of demolition, otherwise they don't know where the location of the closed balcony is, and the demolition is likely to be demolished to the exterior wall, resulting in the later installation of windows, and the exterior wall damage cannot be repaired.

However, it must be noted that both sides of the window must be installed on the original wall, not on the insulation layer, that is, when the insulation layer is removed, it must be removed to the outer edge of the window frame, otherwise you will find that both sides of your window are on the insulation wall, and finally installed, there is a thermal insulation gap of about eight centimeters on both sides of the window frame, because it has been removed, it is easy to leak in the later stage, and the window will not be strong, and the hidden danger will increase.

On the surface, the window frame of your house is pressed against the insulation wall, and the area of the window is smaller, but in fact, the gains outweigh the losses, and the losses are more. So be sure to keep the windows next to the original wall on both sides, not on the insulation, remember, remember!

If the balcony is cold, then put a heater, or else the balcony is packaged and the plastic part is used for external protection, which can be better.

It can be used for thermal insulation and internal heating.

1. First of all, thicken the insulation layer of the balcony wall, and then replace the balcony window with a window with airtightness and good thermal insulation.

2. If the doors and windows are not closed well, then a few sets of heating will not feel warm.

3. The balcony is not heated, and it is particularly cold in winter, so you can paste a layer of floor-to-ceiling windows on the glass.

Glass insulation film or brush glass insulation coating, the insulation film can absorb the heat of the sun and avoid the glass from cooling.

4. If possible, you can add a thick layer of floor-to-ceiling curtains to the floor-to-ceiling windows, and at the same time, you can spread a layer of blankets or place some plush decorations under the glass windows to block the wind and cold.

1. First of all, the insulation layer of the balcony wall is thicker, and then the balcony window is replaced with a window with airtightness and good thermal insulation.

2. If the doors and windows are not closed well, then a few sets of heating will not feel warm.

3. The balcony is not heated, and it is particularly cold in winter, you can paste a layer of floor-to-ceiling window glass insulation film or brush glass insulation paint on the glass, and the insulation film can absorb the heat of the sun and avoid the glass from cooling and grinding.

4. If conditions permit, you can add a thick layer of floor-to-ceiling curtains to the floor-to-ceiling windows, and at the same time, you can spread a blanket or place some plush decorations under the glass windows to block the wind chill.

In winter, many families in the north have to face a problem, that is, the balcony is very cold, and the cold wind outside will blow into the house anytime and anywhere, so many owners choose to modify the balcony to improve the warmth and safety of the balcony.

1. Install glass doors

Isolate cold air between the indoor and the balcony to install a glass door, not only good light transmittance, but also can effectively isolate the cold air in, play a good role in thermal insulation, to the summer door can also be completely close to the wall, so as to expand the room area, open the line of sight.

2. Install warm soft curtains

Install a set of thick curtains between the room and the balcony, and close them at night in winter can also play a role in keeping warm.

3. Plastic steel windows and double-glazed glass are used

Due to the good sealing and poor thermal conductivity of plastic steel windows, it is very suitable for enclosing balconies, if double glazing is used, its warmth will be better, and it can also effectively prevent dust and sand.

4. Add radiators to the balcony

Adding radiators to the balcony is also an effective measure for balcony insulation. This method is best carried out during the non-heating period, because changing the heating in winter is very inconvenient to change due to the hot water in the pipes, and more importantly, the property will not allow it.

How to tile the insulation layer of the balcony

There are two main kinds of insulation layers in the balcony interior, and the corresponding practices are different from each other.

1. Paste insulation board.

If the insulation of the inner surface of our balcony is made of insulation particles, the outer surface of the insulation particles is plastered with insulation particle mortar. In terms of strength, it meets our needs for tiling. However, it is recommended that you do not use the traditional wet paste method to paste tiles, but use tile adhesive, or special tile adhesive and other thin paste methods to paste tiles.

When tiling, pay attention to these problems: Keep the wall plastering layer moist. According to the requirements of the tile, choose the matching tile adhesive or tile adhesive.

It is necessary to carry out maintenance in a timely manner. According to the above methods, the tiles posted can basically ensure that they will not fall off.

2. Wipe insulation granular mortar.

It is not recommended that you paste tiles on this kind of insulation board, and it is indeed not firm. Because the outer surface of the insulation board is a thin layer of dust. Regardless of the adhesive material used to apply tiles, it is possible to remove this plastering layer directly.

Therefore, if the outer surface of the insulation board is really tiled, the insulation board must be removed.

The above is today's sharing, I hope it can help you.

<> window insulation and wall insulation. First of all, for window warmth, the general family will choose double glazing, double glazing is both heat insulation and sound insulation, double glazing can be divided into double coated glass, double vacuum glass and double glazing according to the effect. Secondly, for the wall to keep warm, you need to paste the extruded plastic board on the wall of the balcony, in addition to the extruded plastic board, the materials that can be used as the insulation layer are rock wool and ceramsite board, and then the anti-crack mortar is filled into the air attack reserved by the extruded plastic board or other insulation materials, and finally sealed with gypsum board or light bricks.

In winter, the entire house needs to be kept warm, especially the balcony, so that the cold does not enter the room. What should I do if the bedroom balcony is very cold? Let's take a look.

1. Install glass doors to isolate cold air.

Install a glass door between the room and the balcony, not only has good light transmittance, but also can effectively isolate the entry of cold air, play a good role in thermal insulation, and the door can also be completely close to the wall in summer, so as to expand the room area and broaden the line of sight.

2. Install warm soft curtains

Install a thick curtain between the room and the balcony to keep warm, and close it at night in winter can also play a role in insulation.

3. Plastic steel windows and double-glazed glass are used

Due to the good sealing performance of plastic steel window sealing, poor thermal conductivity, it is very auspicious and suitable for enclosing balconies, if double glazing is used, its warmth will be better, and it can also effectively prevent dust and sand.

4. Add radiators to the balcony

Adding radiators to the balcony is also an effective measure for balcony insulation. This method is best carried out during the non-heating period, because heating is used in winter, and it is very inconvenient to change it due to the hot water in the pipes, and more importantly, the property will not allow it.

1. Install a reflective film behind the radiator. It can be installed between the radiator and the wall with an aluminum gusset with a metal surface, or a metal film for the stove used in the kitchen or a metal film for baking food, which can be installed between the radiator and the wall to keep warm and reflect the heating heat.

2. Install and replace sealing strips on doors and windows. The old-fashioned aluminum alloy doors and windows and steel windows have no sealing strips, and some new door and window sealing strips will have the problem of aging after a period of use, resulting in indoor heat loss.

3. Install thermal insulation curtains or thermal blankets on open balconies. If the closed balcony is changed into a room during the decoration, a set of warm curtains can be installed between the original balcony and the hall, and it can also play a role in indoor thermal insulation at night in winter. The floor can be carpeted, which can increase the thermal insulation effect of the floor.

Many families have sealed their balconies, installed glass windows, and closed the windows.

The kind of balcony that can be made into a sunroom type, the balcony is sealed, the sun shines in, it will be very warm, and the wind will not blow, so that you will not feel cold.

In winter, when the balcony is very cold, we can spread a layer of tatami mats on the balcony floor, so that people can not only keep warm, but also sit on the balcony and soak up the sun. Or you can place a radiator on the balcony, which can also play a role in keeping warm. Or install underfloor heating.

In winter, the balcony is very cold, so you can install thicker curtains to protect against the cold wind. You can also lay a few more underfloor heating pipes on the balcony when laying underfloor heating.