How to deal with tile anti white white?

It is relatively normal for black tiles in the bathroom to appear, and you can try wiping them with a toilet cleaner. Then rinse the wall with clean water. If you really can't do it, you can only let them deal with it when you do cleaning.

In this case, there is no way to deal with it, it can only be said that the color of this color does not matter, and it does not affect the appearance.

Tiles are reversed white after use. You can buy some tile brighteners, maintenance agents. Use a tile maintenance agent to maintain the tiles, and then use a tile brightener to add a layer of light to the tiles, so that it is not easy to turn white.

If the tile is white, of course, it is necessary to soak it in vinegar and then clean it.

Hello friend tile white, you can clean it with cleaning agent or acid-alkali fusion, it should be better, it is best to clean it with alkali.

If you are white about this, you can clean it up, and you can clean it up with detergent.

The tile anti-white spot can only be used with cheeks or laundry detergent, so that after cleaning it, it will not have this problem again.

If you want to reduce the white wings, you can use that scraper to scrape them off, or you can re-put the porcelain plate up and then lay it a little better.

If he refutes it, he refutes it.,There's no way.,This is when his natural fade is oxidized.,Naturally faded protein.,You can't solve it.,Just ignore him.,If you really want to solve the problem.,You just brush her wallpaper with a layer of glue on it.。

If the tile is white, then only the magnetic material on the surface needs to be processed when it is to be processed. In this case, this surface will be brushed out of this room, and it will make him magnetic. The reflective ones are weaker.

I think you can use something specifically for polishing tiles, which I think might be more convenient to use, and I think it works very well.

If you want to turn white, you can prepare rice water, add baking soda, and then mop it to make it white.

Then you'd better just buy that kind of tile cleaner and spray it on it, and then brush it with a brush, so that it will be clear.

Hello friend, it shouldn't be anti-white, but it's this color itself, how do you make it is also this color, so you don't have to deal with it, it's also very good-looking, thank you.

You may not buy tiles of very good quality, in this case it is recommended that you replace the tiles, or do some anti-corrosion treatment.

Either use that caustic soda to wash, or that kind of professional descaler to wash.

The white heat of tile reflection reduction may be because it is too humid. You can just control that.

Ceramic tiles have the phenomenon of anti-white, which should be maintained emphatically, such as using some tile care agents.

If the tile is white, it should be the problem of his right side falling off, which can generally only be replaced.

In this case, you can't handle it very well, you can only do this, because the tiles have already taken the skin.

If the tile can be treated with reduced powder white, you should push the surface of the resource out of the thing.

The tile is reduced to white, this should be able to be processed, completely processable.

I still don't know how to deal with it, because I haven't dealt with it.

If it's white, it's probably the color itself. Don't get too tangled.

How to deal with tile anti-white white? Tile reduction white, first want to deal with white vinegar and soda, mix and spray after a while and then process, clean and white.

Install the anti-white, how to deal with it, I think this thing you can use some professional cleaning tile things should also be possible.

Applause alkali whitening, please ask if the processing should be better handled by your professional technicians, re-recording.

The phenomenon of pan alkali is usually caused by the dialysis of brick joints, and the joints can be retreated.

The white substance that comes out of the tile is: cement alkali.

Pansine alkali is a common disease on the surface of buildings, according to its different causes and manifestations, there are a variety of names such as frosting, whitening, whitening, frosting, wall and decorative surface erosion, etc., it is a disease phenomenon that destroys the original building materials with the change of external environment such as temperature and humidity in the soluble saline alkali of soil, adobe, brick, cement, mortar, concrete, masonry, ceramic tiles, coatings and other building materials. The degree of erosion damage is also very different, and the common phenomena are rejuvenation, foaming, pulverization, bulging, hollowing, cracking, peeling, mildew, crystallization, etc.

Cement alkali may have certain reasons related to cement quality, sand, water, air, temperature, and humidity, which is a common problem in construction.

The pebble shape made of cement is also prone to the above problems: a layer of white on the surface.

Solution: Scrape off the ash of the brick joints and re-hook the joints.

The use of special grout, more corrosion-resistant, not easy to alkali.

Tile joints are anti-alkali to find out what the problem is! Why anti-alkali?! It should not be a large area of anti-alkali, because the cement mortar and sand used to pave the tiles, these did not complete the foundation of anti-alkali!

When the wall is alkaline, it should be treated with oxalic acid! If the tile is not a large area of anti-alkali, it is recommended to use a tool to clean the anti-alkali part of the brick joint, to deal with it thoroughly, and finally wipe it clean with a damp cloth and dry it, and then make a porcelain joint for closure!

This is a natural phenomenon. Because there is moisture in the bathroom, and then the tiles are anti-alkali.

Anti-alkali ??? Who do you listen to? Mason or project manager?

Caulk is a relatively mature product, and the quality is generally not a problem. Caulking should be done after the whole house is completed, after the first hygiene, before entering the furniture. It is estimated that the masonry is trouble-free, and the black joints were made immediately after the bricks were pasted, and then the construction was carried out, and the dust stuck to the undried caulk.

After mopping the floor, it is black, and when it dries, it will show white marks .........Can't be washed off. Try using a utility knife to cross off one layer of caulk and do another caulk or reseam.

It is beautiful, convenient and practical to coat with beautiful sewing glue.

It is the water that enters under the floor tile, and the adhesive mortar of the floor tile is likely to be constructed by dry paving, and the mortar is re-hydrated after the water is entered, generating a large amount of segregated calcium, which reacts with water and air carbon dioxide to generate white calcium hydroxide and other substances.

Suggested methods: 1. Re-paving bricks, using polymer waterproof mortar and wet paving method when paving;

2. Brush the "water-based cement leakage crystalline waterproof material" on the ground, which is colorless, brush on the floor tile joint, or thin to the previous layer, so that the crystalline material can penetrate under the floor tiles, react with the mortar below to form insoluble matter, and close the capillaries. In order to allow the paint to penetrate downward, the bathroom floor should not be mopped for one or two days, and the penetration time should be longer. During the construction period, the amount of whitening will increase, and it will become less and less after a while.

This is mostly caused by poor grout tiles or uneven grouts and uneven grouts, and undense filling. Hang off the pulverized grout and re-grout it.

We call this panulate. Generally damp places will appear. It will also appear in the new house. It's good to clean. Harmless.

Use a layer of painter's putty on the ground and shovel it off when it dries.

It depends on what causes the anti-whiteness.

1. If it has been pickled and burned white, then it can only be shoveled.

2. If it is caused by the weather, clean it with cleaning agent.

Brush the "water-based cement leakage crystalline waterproof material" on the ground, which is colorless, brush on the floor tile joint, or thin to the previous layer, so that the crystalline material penetrates under the floor tile, reacts with the mortar below to form insoluble matter, and closes the capillary pores in order to allow the paint to penetrate downward.

If you want to whiten this one, it is recommended that you do a blackout.

1. The first paved is generally like this, mainly because the moisture below is too heavy and emotional, which does not affect the use, often mops the floor, and naturally disappears after a few months.

2. If you use all-quality bricks or good glazed bricks, the alkali phenomenon is usually caused by the dialysis of the brick joints, and the gaps can be retreated. The cracks of the floor tiles are treated with a cutting machine, the original cement mortar is cleaned, and the joints are refilled with a good waterproof caulk.