How to do the three way separation in the bathroom? How to create a three way separation in the bath

For domestic housing design, the bathroom is often not considered so fully, and it is good to be able to separate dry and wet. If you want to do it, demolition and reform are indispensable. First, move the wall on the right side of the original bathroom to the direction of the master bedroom on the right by 1500px.

Doing so also sacrifices the size of the large wardrobe in the master bedroom. Build a wall again. It was then divided into three pieces with red bricks, and at the same time, it was necessary to do a good job of waterproofing.

If you feel that you don't know where to start, you must first determine the household appliances and equipment you need, and then decide the size and placement of the space, compromise with each other, and strive not to waste space, and focus on convenience. In addition to the basic washing function in the bathroom, you also need a strong storage function! Something that is usually cluttered.

For example: skin care products, bath products, cleaning products, toilet paper, clothes that need to be changed, bath towels. We must think of the most reasonable storage possible.

I am not in a position to offer a proposal, so I can only make a few comments based on my personal experience. 1 No matter how you do it, the possibility of putting down the wall-mounted washing machine is very small, it is recommended to give up this idea, from the perspective of housework flow, two washing machines in two places will not make you feel happy, Casarte has a big brain up and down two washing cartridge washing machines, you can consider. 2. There is only one place to wash your face at home, will it not be good to arrange the light in this way?

Washing in a place where there isn't a lot of natural light is not a big deal, but what about something as wonderful as brushing your teeth in the early morning sun? However, when you take a bath, unless you have a beautiful view from the window, you don't need a window so much. 3It is not recommended to put cleaning supplies and mop pools in the locker room, it feels weird!

I also don't approve of putting it in the toilet, the mop pool is not necessary, the cleaning supplies are best according to your housework habits, the moving line is moving, I personally think it is really best to put it in the bathroom area, but I didn't come up with a plan, maybe you can consider putting it on the balcony, a thin space.

Steps: First, each washing area is a separate space to protect privacy and isolate odors and moisture; Second, improve safety, especially for families with the elderly and children, and reduce the possibility of stagnant water in the bathroom; Third, ensure that the bathroom is neat and clean, and prolong the service life. How to create a three-way separation in a 3-square-meter small bathroom?

1. Square, as soon as you enter the door, it is the washing area, which is the most frequently used area of the whole bathroom, so it will not affect the use of other areas when placed at the door. In the middle is the toilet area, the small toilet is separated by a baffle to form a separate space, if you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area.

This is generally not recommended, after all, it will affect the aesthetics and give people a feeling of cramped and cramped space. The square space picks up all the walls, and at one end of the bathtub there are several niches or horizontal partitions for bath towels and other bath changes. The bathroom is designed in the innermost, the edge of the bathtub itself is a partition belt, and the shower leans against the wall at the other end of the bathtub, which is convenient and does not take up space.

2. Rectangle, compared with a square, the space of the rectangle will be better used. The same is the washing area as soon as you enter the door, but the rectangular space can also be squeezed out of the washing machine, so you can throw your clothes directly into the washing machine when you take a shower. Placing the toilet and shower parallel to the innermost and shielding it with a shower curtain is the best way to use it.

Now the house price is getting higher and higher, in this case, more young people will consider a small house, so that the pressure to buy a house will be less, and the general small bathroom will be smaller, so how to make a reasonable design for a small bathroom, and do dry and wet partitioning is very important. Next, let's introduce how to create a three-way separation in the bathroom!

1. Square bathroom.

As soon as you enter the door, it is the washing area, which is the area with the highest frequency of use in the whole bathroom, so it does not affect the use of other areas at the door, the middle position is the toilet area, and the small toilet is separated by a baffle to form an independent space, if you feel that it is not private enough, you can install a small shower curtain to completely separate the toilet area, it is generally not recommended to do this, after all, it will affect the appearance, and it will also give the cheating person a cramped and cramped feeling.

2. Rectangular toilet.

Compared with the square, the rectangular space will be better used, the same door is the washing area, the difference is that the rectangular space can also be squeezed out of the washing machine, when you are in the shower, you can directly throw the clothes into the washing machine to wash, the innermost parallel to the toilet and shower, and with a shower curtain to cover it is the best to use it.

Bathroom decoration points.

The water vapor of the bathroom is relatively large, and the top moisture-proof should be done, and now the usual high-rise buildings are the bathroom and the bathroom are integrated, so the bathroom is often surrounded by water vapor, so the moisture-proof of the roof is important. To do bathroom roof waterproofing, it is good to change a layer of water glass on the roof of the shed, and then choose a PVC gusset with better waterproof performance. The gusset can be installed on the keel and can also play a role in obscuring the pipe.

As the saying goes, "golden kitchen and silver bathroom", the quality of bathroom design will greatly affect the life experience of residents; Many people will think of doing dry and wet separation when decorating the bathroom, but the ordinary two separations are just a simple separation of the shower area, and the water vapor will still spread throughout the space, while the three separations can truly achieve "dry and wet separation".

Three-separate toilet refers to the independent separation of the shower area, washroom and toilet, and three people can use the shower, washroom and toilet room at the same time without interfering with each other; The three-separate toilet shower room is completely independent, and after taking a bath, the washroom area and toilet area can ensure dryness, and the dry and wet separation is truly achieved. The three-separate toilet can better protect privacy, and the three areas can be used at the same time to improve the efficiency of use; Ensure the cleanliness of the bathroom, ensure dryness, easy cleaning, and extend the service life of the bathroom.

This has to do with the design of the triple split bathroom. If the family bathroom area is long, there is a washbasin in the middle, and the toilet and shower room are on either side. If the toilet area is square, you can make your own long area and separate the washbasin, toilet, and shower room.

Try to place the washbasin at the door as much as possible to make it more hygienic and convenient. Tri-separation is best suited for long-sized bathrooms, and square toilets cause waste of space (one area is too large) and extended partitions when doing tri-separation.

The three separate bathrooms have two cubicles, at least one of which is made of opaque material – a compartment between the toilet and the washbasin. Otherwise, the use of toilets and washbasins will still affect each other, causing the 3 separate deployments to lose their original meaning. If possible, place the washbasin outside the bathroom and separate it with a partition.

Shower dividers mainly play the role of separating dry and wet, so it's okay if it's opaque. After all, the most frequently used toilets and washbasins are used. The layout of the three separate restrooms is important.

We should design the layout of the room according to the privacy required in each area.

The shower area with the highest need for privacy should be placed in the deepest part of the bathroom. This is the toilet area. It should be adjacent to the shower area.

On washbasins that require little privacy, they are usually placed closest to the door. Since you only have one bathroom, and the bathroom is also very large 7 square meters, so don't add a wall between the bathroom door, the wash, and the toilet now, move the door here, and take out the washing face separately. In this way, someone will not delay others to wash their faces when they go to the toilet.

Bathing in a bathtub with a toilet is naturally separated from urine. (It can be blocked directly with a glass door, but the advantage of a bathtub-style partition is that it does not come out of the water, how much does the glass door flow, and it is too tiring, and taking a hot bath can relieve fatigue.) In this way, there is no delay in the toilet when taking a shower, and it is no problem for three people to use it at the same time, so please use it as much as possible!

The washing machine can be placed on the balcony. Balconies have load-bearing walls on both sides.

It is better to avoid water on the ground. 3. The separation is finer than the dry and wet separation, the mutual space is not obstructed, and the bottom of the dry ball is not easy to produce water accumulation. It is easy to use, and the toilet and shower room do not affect each other.

In traditional wet and dry separation, the toilet and shower room are generally separated, and if the dry and wet separation is more standard, the washbasin is separated. In this way, there is no delay in using the toilet and shower when using the washbasin, but the toilet and shower cannot be used at the same time. Relatively speaking, there is still room for improvement in the efficiency of life.

Three separations were achieved. The toilet area and shower room can be used at the same time, and the efficiency of life is greatly improved.

If you want to make the bathroom into a three-separate type, you must first divide the bathroom into dry and wet separation. The bathing area is a wet area. The toilet is located in the dry area. In addition, a handwashing station is set out from the sanitary compartment.

Partitions can be used to divide the sanitary partition into three layers, each with a different function. For example, the innermost layer is responsible for the shower, the second floor is responsible for the basic functions of the toilet toilet, and the outermost layer is responsible for washing.

Bathrooms can be divided into three floors with different functions. For example, the innermost layer is responsible for showers, the second floor is responsible for the basic functions of the bathroom, and the outermost layer is responsible for washing. Do you agree with this design solution?

This requires a reasonable planning of the space, and it is best to find a professional designer to assist in expressing your ideas, and the designers are experienced and can help us realize our ideas.

A shower should be installed close to the glass, a toilet should be installed next to the shower, a partition should be made next to the toilet, and a sink should be installed outside, so that the distribution will be more reasonable.

If you want to make a three-way separation of sanitary napkins, the most important thing is to separate the dry and wet first, so that the bathroom area, washing area, and toilet area can be reasonably distributed and arranged.

The bathroom is too small, how to do three separation "dry and wet separation"?