The traditional bathroom dry and wet separation is not popular now, so how to do it?

Generally, the sink is placed outside for partitioning. This results in double separation.

Toilets can be combined together, and the washbasin in the restroom can be placed outside the restroom so that it does not interfere with the use of the restroom.

Nowadays, it is more popular to design the handwashing station outside the bathroom, that is, the half-wall washbasin, and the shower room is made into a small single room.

The bathroom can be separated from wet and dry by using a glass shower room. Because the separation of dry and wet still produces odors, and it is easy to queue up for the toilet.

It can be customized according to the size of the bathroom, if the area is small, you can use the shower curtain to isolate, if the area is large, you can install a sliding door; Because they feel that it is a waste of money, and the room will be smaller, which is very awkward.

In fact, in the process of designing dry and wet separation, it can also be adjusted according to the area of the bathroom, and you can choose to separate the shower area from the washstand, so that it will be more convenient in the process of use, and can reduce the water stains on the ground. The reason why most people prefer dry and wet separation is also because it can facilitate life, enhance safety in the process of use, and can also improve the efficiency of use. If the cabinet in the bathroom is made of wood, separating dry and wet can also prolong the service life, reduce the formation of bacteria in the bathroom, and do not feel cold when taking a bath in winter.

Because the design of dry and wet separation can keep the water vapor in the space for a longer time, which can effectively avoid the diffusion of hot air, this operation is also very suitable for winter bathing. Water splashes can also occur during the bath, and if there is too much water on the floor, it is easy to fall. Moreover, the cabinets in the bathroom are in a state of moisture for a long time, which is also very easy to breed bacteria.

When designing for wet and dry separation, you need to ensure that the sink is dry, and if the family population is large, this design can also improve the utilization rate. If it is busy in the morning, the crowd of people who go to the bathroom will not affect the crowd of people who wash up. You can choose to use an opaque glass door for partitioning, and if you have a very small bathroom, you can also choose to buy a shower curtain to divide it.

Dry and wet separation is very necessary, and it can also play a good decorative effect, but it is also necessary to understand some precautions in the design process. Many people will also choose to put some electrical appliances in the process of using the bathroom, so there will be some sockets in the bathroom, and after the separation of dry and wet, electric shock can also be avoided.

For the separation of dry and wet in the bathroom, you can put the washing machine and dryer on the balcony, and you should also make a good space separation for the toilet and shower; Because the separation of dry and wet can ensure that people are more convenient in their lives, and it is very helpful for the maintenance of most items in the bathroom, which can reduce most of the cleaning work in the bathroom.

To judge according to the area of the bathroom, if your bathroom area is relatively small, you can choose to use a shower curtain for dry and wet separation, if the area is relatively large, you can use a glass door. This ensures that the restroom is dry and does not interfere with the use of the sink.

I think the design of the bathroom should be combined with the size of the individual house, and when doing dry and wet separation, you can choose some glass materials to divide; Because it is more convenient to clean up the dry and wet separation, and it is more beautiful, it is more convenient and convenient in the future life.

What should I pay attention to when decorating the bathroom? Do I need to do wet and dry separation? Wet and dry separation is required.

Pay attention to non-slip. 1.Wet and dry separation is a popular design concept in bathroom design.

With traditional bathroom equipment, moisture is everywhere after taking a bath, and the humid air stays in the bathroom for a long time, resulting in foul air. Divide the toilet into two parts, dry and wet separation, so that the place outside the bath can be kept dry and hygienic, and the overall environment of the toilet can be kept clean and beautiful. The dry and wet separation mainly refers to the separation of the washstand and the toilet, in which the dry refers to the washbasin quietly, and the wet refers to the bathroom.

2.The issue to consider during the wet period is non-slip – the tiles will be smoother when wet than when dry. Nowadays, it is very common to lay tiles of different materials in dry and wet areas, which is also the reason why the non-slip bricks are too high.

If you are on a budget, you can lay different tiles in wet and dry areas. Pay attention to moisture-proof in dry areas: There is not much water in dry areas, so pay attention to the problem of moisture-proof - despite the separation of dry and wet, the overall humidity in the Weizhaoyun living room is still relatively high.

Around pipes, in the corners of walls, under floors, bathroom cabinets, behind toilets, etc., these places are difficult to clean and water will stay inside. After a long time, there will be a mutiny of water destruction and mildew. Reducing the number of gaps can reduce the burden on the toilet.

3.That's because of the cornerstone.

When many owners decorate the bathroom at home, they are hesitant about whether to do dry and wet separation, and they don't know if the bathroom needs to be separated from dry and wet at this time? In order to renovate the hygiene of the bathroom at home, I plan to do a dry and wet separation of limbs but I don't know the skills, so what do I need to pay attention to when doing dry and wet separation? 1. Does the bathroom need to be separated from dry and wet?

Dry and wet separation is a popular design concept in bathroom design. With traditional bathroom equipment, moisture is everywhere after bathing, and moist air stays in the bathroom for a long time, causing air pollution. Dividing the bathroom into two and separating dry and wet can keep the venue outside the bath dry and hygienic, and maintain the overall environment of the bathroom clean and beautiful.

The separation of dry and wet mainly refers to the separation of the handwashing station and the bathroom, where dry refers to the handwashing station and wet refers to the blind room of the bath pants. 1. Increase the life of the equipmentSome owners think that the significance of dry and wet separation is to avoid damage to the tile and floor tiles caused by water vapor, but this view is wrong. The washing machines and wooden cabinets in the bathrooms are the ones that are really affected by moisture.

Because the water vapor will corrode the motor of the washing machine, causing it to rust and shorten the service life, the wooden cabinet will be deformed due to moisture. 2. Higher safety will not slip due to splashing on the floor and accumulating water, and some electrical appliances in the bathroom space also.

Nowadays, most of the family's bathroom is not exposed to the sun, if the bathroom decoration is dry and wet, it will always be in a humid state, and the E. coli in the toilet will attach to the air, towels, toiletries and other items for more than 8 hours, which seriously affects the health of the family. Therefore, more and more friends pay attention to the separation of dry and wet bathrooms, so that not thinking about changing can only solve the problem of dampness in the bathroom, so that the practicability of the bathroom becomes higher, and it is suitable for small families with only one bathroom. Advantages and disadvantages of dry and wet separation toiletsDry and wet separation is a more cutting-edge design concept in toilet design.

Compared with traditional bathroom equipment, after taking a shower, the humid air is full of moisture, and the humid air is trapped in the bathroom for a long time, resulting in air pollution. Separating the wet and dry bathrooms can effectively keep the dry and hygienic space outside the bath. 1. Advantages of dry and wet separation toilet 1. Improve safety

No slipping and falling of family members due to water accumulation on the floor; 2. Increase the usable area: concentrate the water vapor within a certain range, so that other places can be reused; 3. Extend the life of the equipment; 2. Disadvantages of dry and wet separation toilet 1Generally speaking, the dry and wet soaking shirt is not suitable for all house types, and generally only the bathroom of a large apartment is suitable for drying.

<> dry and wet separation is to separate the dry area of the bathroom and the wet area with a partition, the general family bathroom will do dry and wet separation, so as to keep the bathroom clean and tidy and avoid water leakage, how to do dry and wet separation is to see the owner himself, and the advantages of dry and wet separation are many, 1, to prevent the slip time caused by the wet ground or to reduce the occurrence of leakage accidents. 2. The separation of dry and wet can avoid the erosion of the toilet materials in the humid environment and prolong the service life of the toilet materials. 3. It is easy to clean, hygienic and environmentally friendly, and the separation of dry and wet is both beautiful and convenient, and can also prevent the breeding of bacteria in the bathroom.

1. The dry and wet partition is to separate the bathing place, because the basement where the bath is taken is called the wet area, and the other is the dry area, which is the washing place and the toilet bathing place are separated, and one person can go to the toilet or take a bath, which will not affect others to go to work in the morning to wash and make up what are you doing, and there is a door between their stoves and meditations.

2. There are obvious separation measures between the dry area and the wet area, for example, when taking a bath, the sail is prepared, the water on the ground of the bathing part is the wet area, and the toilet position or washbasin is the dry area without water on the ground, and the middle is separated by a hidden car dust wall (door) or partition.

After all, decorating the house is a big deal, and it will not be renovated frequently in a short period of time after living in, so it is necessary to be very cautious in the start of construction, and start construction after the design and plan are done. Many decoration friends often consider some very practical problems, such as the bathroom is a very important place, if it is not handled well, it may not be convenient to use in the later stage. Some friends want to do dry and wet partitioning, which should optimize the design scheme according to the actual situation of their own space.

1. Dry and wet zoning needs to be based on the house design to see whether there is a feasibility of construction. For some toilets with a relatively large area and suitable for dry and wet partitions, you can consider your own living and use habits, and ask the designer to make a reasonable plan. Consider the situation of family members in advance and how often everyone uses the bathroom.

In addition, consider whether there is a bathroom or two bathrooms at home, and what are the usual washing habits, and consider all aspects before making arrangements. When doing dry and wet partitioning, aesthetics is one aspect, and more important is the functional spatial layout, which should be more convenient to use. <>

Second, the dry and wet partitions should be fully utilized, rather than only considering the conceptual decoration. When considering the dry and wet partitions of the bathroom, you should think about the arrangement of the living line in advance, so that it will not disturb other spaces when it is convenient to use, and the privacy of the space should also be considered. After all, the location of the bathroom is different from other places.

Therefore, when doing dry and wet partitioning, you should consider some problems clearly in advance, rather than thinking that dry and wet partitioning sounds very good, so you follow the trend to do dry and wet partitioning, but the actual usage rate is not high. <>

Third, the actual toilet area needs to be considered for dry and wet partitioning. Some bathrooms have a relatively small space area, and it may not be so easy to do dry and wet partitions. Therefore, before decoration, you need to think about your own living needs in advance, so that you can be more targeted when decorating and designing, so that designers can better understand some of your ideas and needs.

You can use a glass partition or make a partition wall, which can be separated from dry and wet, and the separation of dry and wet is very good for the bathroom, and it will also increase the service life of some things in your bathroom, and it will be very clean, it looks very layered, and it is very easy to take care of.

Put a window in the bathroom and separate the shower area from the place where you wash your hands, so that you can separate the wet and dry areas.

You can use a glass door to separate your shower from the washbasin. That way, you won't splash the water outside when you take a shower. Or just use a waterproof curtain to separate the bathing area from the outside area.

First of all, it is necessary to divide the sanitary partition into different use areas, put the shower in the innermost, and use explosion-proof glass to make the bathroom, put the toilet separately to prevent each other from rushing to the toilet in the morning, and the washbasin can be placed on the outermost, so that the bathroom is not only beautiful, but also does not affect the use function.

1.glass partitions, divided into semi-open and all-inclusive; 2.Solid wall partition to make the bathroom more spacious; 3.Smaller bathrooms can be fitted with shower curtains, but the water barrier is poor and a water barrier needs to be added.

Nowadays, the bathroom has become an indispensable part of our lives, because it is a place we often go to, but whether the bathroom is small or large, it adheres to its own four-character principle, that is——"Wet and dry separation"What exactly is wet and dry separation? Are all types of apartments suitable? In fact, don't blindly follow the trend, take you to understand which ones are more suitable for dry and wet separation!

Let's first take you to understand what is dry and wet separation. In fact, the separation of dry and wet can also be understood literally, one is a dry place and the other is a wet place. It is to separate the dry and wet areas.

When we use the bathroom, the water quality is not spilled, we collectively call it the dry area, such as the toilet or the place where the clothes are placed, and the wash basin, etc., this place is the opposite of it, the most representative is the bathroom.

What are the benefits of wet and dry separation?

The first benefit: improve the efficiency of restroom use.

For example, when we use the bathroom, especially during peak hours, we can wash directly outside without waiting. The person who went to the bathroom came out, so it would be more convenient.

The second benefit: it will be easier to clean.

We will often clean the bathroom, after all, the bathroom will be dirty for a long time, so if the dry and wet are separated, we only need to use a rag in the area to gently wipe it, in the wet area, we can use a large number of water stains, clean it can be ......

The third benefit: keeping your restroom clean and durable.

After all, the bathroom is also an independent space, if the dry and wet are not separated, the service life will be greatly reduced, after all, some are wooden. It can cause moisture and turbidity to the air. If the wooden cabinet is separated, there will be double vision and bacterial growth, and if it is separated, it will prolong the life of the bathroom.

The fourth benefit: Reducing the potential hazards of the restroom.

In fact, there are many dangers in the bathroom, for example, if there is water in our bathroom, if there are elderly people and children at home, it is easy to accidentally slip. There are also people who will buy some cheap electrical appliances in order to be greedy, and if there are water stains splashed, there will also be water vapor entering, resulting in leakage. are very dangerous.

The fifth benefit: water vapor is concentrated to keep warm.

Just when there is no heating in the southern season, the weather is too cold, if we have a separate small space, we can talk about the shower room, condense your water vapor together, and when you take a bath, you will not feel cold when you tell me, there is a warm effect.