The bathroom is heavy in water and can be sewn

The bathroom is an extremely humid place, and the tiles will often come into contact with moisture, so the gaps in the tiles are very easy to get dirty and moldy, and affect the health of the family. Therefore, it is necessary to sew the bathroom beautifully.

It should be noted that the bathroom needs to keep the floor dry and clean before doing beauty sewing. Because once the water vapor enters the beauty sewing product, it will affect the effect of the beauty sewing construction. When sewing in the bathroom, you can choose oil-based sewing products, which have better waterproof performance.

The bathroom needs to be sewn.

Because the sewing agent looks better than the white caulk, and has the functions of waterproof, mildew resistance, etc., but many people will still find the problem of mildew after using the sewing agent, which is due to the different categories of sewing agent, it usually has two categories: watery and oily, of which the water-based ingredients are simple, and it is easy to become mildew and black if it is in a dark and damp place for a long time.

It is also a kind of double-share sewing agent, the main ingredients are epoxy resin, high-grade pigments and curing agents, etc., which can be mildew-proof, waterproof, black-proof, and used for a long time, even if it is used for twenty or thirty years, there is no need to worry.

The detailed steps for the bathroom to be suitable for sewing are as follows;

1. Prepare materials first, such as sewing agent, knife, tape, cleaning sponge, pressing plate, etc.

2. Shovel the wall joints first, take a knife to shovel out the dirt putty in the wall cracks, leave the corresponding space, it is best to do it several times to ensure that the gaps are clean, and then open a 45-degree opening at the front end of the prepared beauty sewing agent, and load the beauty sewing agent into the plastic head, which can generally be filled in the glue gun.

3. Squeeze the beauty joint against the wall joint, pay attention to the appropriate, otherwise there will be a waste problem, but it should not be too little, otherwise it will not be able to ensure that the filling is full, and it must be stable and uniform.

4. After the sewing agent is filled, it needs to be flattened, and the pressure plate is pressed into the gap from the front to the back to ensure that it is tight.

5. Finally, you need to clean the wall, you need to use a sponge to remove the residual sewing agent, scrub at the same time, do not let the sewing agent on the sponge enter the wall again, pay attention to the actual operation must speed up, otherwise the coagulation of the sewing agent will have to be removed with a knife.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The reason why the bathroom should not be sewn is that it will become moldy, ugly, breed bacteria, and hide dirt.

Beauty sewing belongs to the water, not all places can use beauty sewing, especially the bathroom, because the bathroom is often in contact with water, it is easy to turn black and moldy for a long time, all the suggestions are best not to do beautiful sewing, so it will outweigh the loss, and it will slowly fall off in less than two years.

Moreover, the beauty joint will increase the smoothness of the tile surface, reduce the friction between people and the ground, and bring potential safety hazards; If you choose a sewing agent that is not environmentally friendly, it will release harmful substances when soaked in hot water.

Attention should be paid to the construction of the bathroom

1. Before paving the bricks in the bathroom, it is necessary to confirm that the waterproof work of the ground wall has been completed, and after inspection, there will be no water leakage before construction. Moreover, the tile surface needs to make a certain slope, so as to introduce the daily water into the floor drain to avoid water accumulation.

2. The water vapor generated by the bathroom is more serious, so it is necessary to pay attention to the ceiling material used in the ceiling, which needs to have waterproof and anti-corrosion performance, otherwise it is very easy to appear aging and mildew, which is not conducive to long-term use. Moreover, the tiles on the bathroom wall should also be selected with waterproof function and paved smoothly.

3. It is best to have designed windows in the bathroom to ensure good indoor ventilation and reduce humidity. At the same time, in order to prevent the water from the bathroom from flowing into the room or living room, it is necessary to increase the height of the bathroom threshold to prevent the water from entering. If the sliding door is designed, it is necessary to do a good job of waterproofing.

Don't do beautiful sewing in the bathroom because the bathroom is often in contact with water, and it is easy to turn black and moldy after a long time。If you do the beauty sewing in the bathroom, it is likely to cause more than worth the loss, the beauty sewing will slowly fall off in a short time, and the effect will become worse and worse, so it is not recommended that you do the beauty sewing in the bathroom.

If you want to do beautiful seams in the bathroom, you need to understand the moisture content of the construction environment first, and at the same time, before doing beautiful seams, you need to clean all the dirty things in the tile joints, and choose a beautiful seam agent with good waterproofness. And in less than two years, the beauty sewing will fall off.

When doing beautiful sewing, you should also pay attention to the best time to do beautiful sewing should be when you have just finished pasting the tile. Because when the tiles are just pasted, there will be a lot of sand, stones, and dust falling when the ceiling and wall are decorated in the later stage, and they are stuck in the gaps of the tiles, which is difficult to clean. The surface and crevices of the tile are the cleanest just after the tile has been applied.

Another benefit is that just after the tiles are applied, all the tile gaps are exposed. There are no cabinets, partitions, glass, etc., and all the tile gaps can be filled with beauty joints. If there is no caulking in the tile gaps, it is easy for insects and eggs to run in, and it is simply an excellent place to hide dirt and dirt.

Hello dear!First, what to do if the bathroom is flooded before the sewing of the old grandson can first be wiped dry with a cloth, dry with a blow-up machine or dry the brick joints with a drying instrument, if there will be no more water, then it can be normal construction;If there is still water, it may be water seepage, and it is necessary to open the tile to repair the leak or redo the waterproofing. If the water is ingress due to high humidity, you can wait for it to dry before construction.

2. Mix and stir according to the instructions, so as to improve the final effect, pay attention to the proportion of mixing, so as to better harden, if the stirring is uneven, there may be falling off, low hardness and other phenomena, which will affect the subsequent use. 3. In the process, it is necessary to use even force to ensure that it is smooth, so that the aesthetics are stronger. At the same time, it is necessary to do a good job of protecting doors and cabinets, and do not get the beautiful seams on them, and generally there are traces that can be torn off after hardening.

Summary: If you want to use it in stone, you should pay attention to the choice of materials, and generally will not choose materials with high hardness for construction, because of the principle of thermal expansion and cold contraction, if the hardness is too high, it is easy to produce degumming, cracking, etc. The method of water entering the bathroom before the beauty sewing and the precautions for the construction of the beauty sewing are introduced here, I hope the above content can help you.

Summary. Pro-<>

Hello, the bathroom is not recommended for the following reasons: 1. The bathroom tile joints will inhale a certain amount of moisture and reduce the humidity in the air2. The beauty of the seam will increase the smoothness of the tile surface, reduce the friction between people and the ground, and bring potential safety hazards3. If you choose a sewing agent that is not environmentally friendly, it will release harmful substances when soaked in hot water. Pro-<>

<> why the bathroom is not recommended for beauty sewing.

Hello dear <> bathroom is not recommended for the following reasons: 1. The bathroom tile joints will inhale a certain amount of moisture and reduce the humidity in the air2. The beauty of the seam will increase the smoothness of the tile surface balance, reduce the friction between people and the ground, and bring potential safety hazards3. If you choose a sewing agent that is not environmentally friendly, it will release the sail leather as a harmful substance when soaked in hot water. Pro-<>

<>I'm decorating the house, living room floor tiles and kitchen and bathroom tiles, is it better to do beauty seams or grouts?!

Is there a difference between grout and white cement.

Hello <> is decorating the house, living room floor tiles and kitchen and bathroom tiles with beauty joint. The sewing agent has a good waterproof and moisture-proof effect, strong acid and alkali resistance, and can maintain the original color after a long time. After using the grout for a period of time, it is easy to become dirty and coarse black, and orange is like a bathroom and kitchen, and it is easy to produce peculiar smells after water seepage in the cracks of the wall and ground.

Hello <> Grout is a one-component cement-based polymer modified dry mix mortar. It's no different from cement. Good.

Bathroom tiles and kitchen tiles can be used for beautiful seams, which can prevent dirt from falling into the gaps, and can also play a good decorative effect, but it should be noted that you can not touch the water immediately before and after construction, and you can not do beautiful seams in a too humid environmentHow long does it take to use water after the bathroom is sewn? What should I do if the beautiful seams of the bathroom are white??Let's find out!

How long after the bathroom is sewn can I use water

Under normal circumstances, 24 hours after the sewing is done, wait until the surface is completely cured before you can touch the water, especially the sewing agent of real porcelain glue, because its composition will contain epoxy resin, and there will be a certain chemical reaction when it encounters water, and there will be a whitish effect of the sewing agent, even if the air is humid. Therefore, it is also important to choose the time of beauty sewing construction, and it is best not to carry out it in the rainy season.

What should I do if the beautiful seams of the bathroom are white?

This situation is due to the fact that there is water or moisture in the tile joints during construction, resulting in white joints when exposed to water. The sewing agent is composed of epoxy resin, high-grade pigment and curing agent. The oxygen molecules in the curing agent and epoxy resin will chemically react with the water, causing the pigment to change color, resulting in darkening or whitishing color, and in severe cases, direct transparency.

Turn the heat gun to the highest position and blow repeatedly on the whitening sewing agent. After blowing the beauty socks filial piety sewing agent soft, the false draft is gently pushed forward along the gap of the tile with a spatula, that is, the beauty sewing agent can be eradicated. Remember, it's best to clean the seams thoroughly so that the results will be better.

If the residue of the sewing agent is not cleaned up, it will affect the construction of the seam pressing, resulting in an uneven surface of the seam after the seam pressing, which will affect the appearance.

How long after the bathroom is sewn can I use waterWhat should I do if the beautiful seams of the bathroom are white?

Don't do a beautiful sewing kiss in the bathroom! Hello, I'm glad to answer for you<> what are the reasons why you should not do beautiful sewing in the bathroom 1. Beautiful and short-lived opportunity The sewing agent can actually be used to sew beautiful tiles, and it can also be used to make other parts of the house, but if it is used to decorate the bathroom, the opportunity is very short, because the commonly used sewing agent is water-based, and the bathroom is full of water vapor for a long time. 2. Poor abrasion resistanceCompared with ceramic tiles, the hardness of the beauty seam agent is very low and the wear resistance is poor.

The sewing agent is often trapped in the gaps, so the friction is relatively small. It is precisely because of the depression that it is easier to hide dirt and dirt, and it is easy to take the brush off the beautifier when cleaning it in the later stage, and when brushing with a brush. 3. Poor adhesion For microcrystalline stone, fine-polished glazed bricks, vitrified tiles, etc., the adhesion of beautifiers is poor, especially when changing seasons, it is easy to crack, peel, fall off and other phenomena.

Therefore, based on this reason and the particularity of the bathroom environment, do not blindly follow the trend to make sewing agents. 2. How to buy sewing agent 1. When choosing a bathroom sewing agent, we must ensure that the product has passed the China Environmental Protection Product Certification to ensure the health of the environment. When taking a bath, the indoor temperature rises and the space is closed, and many harmful substances will accelerate the volatilization of harmful substances when heated, so avoid choosing inferior sewing agents.

2. The most important thing is that the bathroom tile grout must have excellent waterproof performance, so as to be beautiful and generous, and it can also effectively prevent the tile gap from being damp and mildew. Some beauty gaskets for spike hood toilets have excellent airtightness performance, which can effectively prevent water vapor intrusion, and can also prevent the accumulation of water and dust. 3. The curing effect of the sewing agent is also a very important parameter.

The sewing agent can be divided into single group and double group. Comparatively speaking, the curing effect of the two-component beauty sewing agent will be better, but because both sides of the paper need to be textured, the construction workload will be relatively large. Hope mine can help you <>

Do you have any other questions?