How to do dry and wet partitioning in a square bathroom? How do you design?

Whether it's square or rectangular, it's important to ensure the size of the wet and dry partition bathroom, which is too small to completeIf there is enough space, to do the way of dry and wet partitioning, there are many kinds of general practice is cost-effective to do glass partition wall decoration partition, waterproof coating decoration partition, the price is slightly higher is the overall shower room, the overall shower room is also a lot of kinds, there are custom shower rooms are also well-known brands of the overall shower room, the price of the overall shower room is generally higher, but the function is more complete.

Depending on how big your bathroom is, if the bathroom is larger, you can build a thin wall and space it out. If the total area is not very large, it is okay to use ground glass for spacing. However, if the total area is very small, you can use a small and medium-sized bathing room, which can also block the water.

In fact, the toilet does not know to divide the dry and wet, which can ensure that the three separations are better, and the separation of the shower room, toilet and washroom is stronger.

Dry and wet partitioning of the bathroom is a development trend of the design scheme, so that the design scheme can not only make the bathroom not wet and cold, but also convenient for two people to use together. The wet area of the wet and dry zone is intended for toilets and wash basins, and the wet area is intended for the shower area. Starting from the daily washing of the face, if there are more than three people in the family and there is only one bathroom, it is best for me to be able to divide a washing room space in the windowsill or the kitchen area of the restaurant, after all, it will be very inconvenient for several people to squeeze into a bathroom in the morning.

Some people have seen a lot of bathroom design drawings and think that if there are few toilets, you can put 2 basins, so it is not easy to store the situation of whether there is a place to wash your face. But in fact, the design scheme of 2 basins, unless the indoor space of the bathroom at home is very large, otherwise placing 2 basins on the surface of a table can actually only lead to the consumption of indoor space. The overall shower room is equipped with the innermost layer, separated by laminated glass, sliding door access, safety and does not occupy space, especially for the elderly and children at home.

It should be determined according to the actual size and length. I set up a bathtub and also a glass partition to add a beautiful appearance.

You can install a glass door in the bathroom to do dry and wet partitioning; Measure the size of the location in advance, understand the glass material you want to buy in advance, and then design it according to the size of the bathroom.

Separate the piece of the bathroom where the wash basin is placed and change it into an open washing area, or you can install a shower room to separate the shower, and the shower room is generally set in the corner of the bathroom to keep the outside area dry. In the design of the square bathroom, it is suggested that you can directly use the sliding glass door to separate the shower area and the toilet area, so that the clear division can ensure the transparency of the whole space.

This should be determined according to the actual size and length, you can set up a bathtub, or you can use glass to partition, which is more beautiful and beautiful.

When the square bathroom is separated from wet and dry, you can divide the bathroom into two rectangles, and then the effect is very good.

How to design a square bathroom? How to do wet and dry separation? Small bathrooms and glass shower rooms take up too much space.

You can consider making a beautiful shower curtain, which can be put away when not in use, and make the most reasonable use of space. The space of the bathroom is very small, and the shower curtain with glass separates the dry and wet, so that the design is not afraid of water entering the shelf. The most suitable solution for separating wet and dry in a small bathroom is to add a shower curtain and a water baffle, and place the shower room in the corner, which will take up less space.

The square bathroom sink is placed outside the door so that the interior space will be more spacious. I put the sink outside the door and made a built-in cabinet and mirror cabinet. Bathrooms with too little space can make more use of wall space and put more small objects.

Some friends will make a wall-hung toilet in their bathroom, or the height of the toilet is high enough, so that there is a part of the space above the toilet that can be fully utilized. Make a wardrobe or put a storage shelf. In the decoration design of the square bathroom, how to decorate the sense of luxury and practicality is something that people have been considering.

In this overall design, the design of the washbasin and shower room plays a very important role!

In the basic renovation method, we can carefully measure the size of the bathroom in a square. The most important thing in this square bathroom is how to make the most of every inch of space. After measuring, we can use the L-shaped corner wash cabinet to increase the countertop and storage space to achieve the best use effect.

Wet and dry separation is still necessary. Add a brick partition between the sink and the toilet, and add a storage niche on top of it, taking into account both the purpose of storage and partition.

In order to further release space, the bathroom does not add alcoves, and only uses the corner of the wall to make two storage shelves, which can meet the basic storage needs of toiletries Sometimes a little simpler is more advanced. The diamond-shaped glass door can be used to seal, which can further increase the activity space of the small bathroom, and achieve the effect of both luxury and practicality! The above is the answer to the question of how to design a square bathroom and how to separate dry and wet.

The square bathroom can only be separated from the dry and wet separation, although this design is simple, but it is the most practical design of this type of house.

It needs to be determined according to the area, dry and wet separation can be carried out, and a bathtub can also be installed, so that the design can be better, and the glass partition can be used for dry and wet separation.

It can be designed in different areas, and the area is relatively large, and it can be directly divided into 4 different areas for design, and the partition is made with glass.

It can be designed with dry and wet separation, semi-open decoration, the shower area is next to the bathroom cabinet, in order not to wet the bathroom cabinet to make a semi-glass partition is also very good, the appearance is very high, and it does not take up space. Other areas can be made into some cabinets.

In a square bathroom, you can place the wash basin toilet in the corners on both sides, and then arrange the shower room at the opposite corner of the door, so that you can make good use of the space; It can be designed to separate dry and wet, as long as the wash basin and toilet are placed in the corners of both sides, and then the shower room is arranged at the opposite corner of the door, you can make good use of the space, or the shower room is designed to be diamond-shaped.

It is necessary to pay attention to the separation of dry and wet, which can be carried out by using glass partitions, which can be better used and is very beautiful.

When home decoration, many people will choose to do dry and wet separation when decorating the bathroom, because after the separation of dry and wet, the water will not be everywhere, it is indeed the case, the bathroom does dry and wet separation benefits are really a lot, the following will introduce you to the square bathroom dry and wet separation, for reference!

The section of the bathroom with the wash basin was separated and changed into an open washing area, which was renovated to make it a scenery in the room. In this plan, the washroom is isolated and decorated with wooden partitions and bathroom cabinets in order to match the interior style. In the washroom, plants are used as embellishments to make the open washroom more integrated with the interior landscape.

You can also install a shower room to separate the shower, and the shower room is generally set in the corner of the bathroom to keep the outside area dry.

Second, the benefits of wet and dry separation in the bathroom.

1. High security.

The toilet is a place with a lot of water consumption, so it is very easy to form problems such as water on the ground, daily water can be conductive, and the separation of dry and wet can be placed at a large level to cause leakage and electric shock.

2. Improve the efficiency of the bathroom.

By separating the toilet from wet and dry, there will be no conflict between going to the toilet and washing, and the structure and layout of the toilet can make the use of the toilet more convenient.

3. Increase the service life of the equipment.

The separation of dry and wet in the bathroom can effectively prevent the damage of water vapor to the washing machine and cabinet in the bathroom, and the long-term influence of water vapor will erode the washing machine, reduce the use time of washing machines and other equipment, and wood products will also cause deformation and corruption under the action of wood products for a long time.

4. Sanitation and environmental protection.

Putting the sink in the toilet for a long time is very damp, and at the same time, the toilet is in a humid condition for a long time, which will cause the appearance of bacteria and various insects in the bathroom, which is unhygienic.

If the area is large.

It is possible to design a fan-shaped bathtub to be placed in one corner.

If the area is small.

A shower room can be designed in a corner.

As a frequently used area in the home, the bathroom occupies a small area, but it is inseparable from daily washing, bathing and toileting. Nowadays, dry and wet separation is more popular, it better achieves the division of functions, and effectively reduces some health problems, so what are the skills of dry and wet separation in the bathroom?

Bathroom wet and dry separation tips.

1. Design a dry area at the door.

The dry area design doorway is an absolutely separate design scheme, directly leaving the shower area and the toilet in the bathroom, this kind of scheme is the most efficient, the separate handwashing area avoids the conflict between the toilet and washing, especially suitable for families with more people, and easily achieve the effect of dry and wet separation.

2. Semi-open separation.

It is necessary to separate the handwashing station by means of glass or brick wall to achieve the effect of dry and wet separation, to achieve a clear visual division, and not to affect any light, the two are completely independent, and the effect of this scheme is very good.

The layout of the bathroom generally needs to pay attention to the use of space and spaciousness, and now many small bathrooms are not only used for toilets, but also have the functions of toilets and showers, so it is particularly important in the layout, the most common is the layout of dry and wet separation, which is also the choice of most families. If you want to do a good job of dry and wet separation, the first thing that is more common is the shower curtain, which is relatively simple, and the cost is relatively low, it can separate the space, and it will not be so crowded, which is also more suitable for small toilets. There are also some families who may choose to use glass as a partition, which is more designed and cheaper, and some families may choose to use glass doors to separate the dry and wet areas of the bathroom, which is also suitable for larger bathrooms.

There is also a common partition wall, which will choose to use a stone wall to separate the dry and wet areas of the bathroom, and basically the practicality is not bad.

If you do a good job of separating dry and wet in the bathroom, it will make the whole bathroom look more beautiful, and you should know that if you often take a bath in the bathroom, it will fill the whole room with moisture, so that it is easy to make the air in the bathroom become very uncirculated and do a good job, and the separation of dry and wet can keep it clean and hygienic, and maintain an overall beauty of the bathroom. And if you always take a bath in the bathroom, like the bathroom, if you place some wooden cabinets, it is very easy to breed some bacteria, and it may also cause some bugs.

However, not all bathrooms are suitable for dry and wet separation, some people buy second-hand houses, so it is difficult to achieve dry and wet separation in the process of transformation, you must know that if you want to renovate the bathroom, the cost is relatively large, if for some people with insufficient budget, there may be some pressure. Moreover, if the bathroom wants to do dry and wet separation, the area requirements are still relatively large, otherwise it is easy to make the whole environment look more closed and crowded.

Finally, if you want to do dry and wet separation in the family, you still need to think clearly, and most families can directly choose the shower curtain if the cost is relatively low.

Make a partition in the bathroom, or you can also prepare a shower curtain, choose some longer lengths, so that when you shower, there will not be too much moisture, and it will not affect the dry environment.

The toilet is generally laid out according to the toilet in the back and the bath in front, and there must be a separating cloth to do a good job of dry and wet separation.