What should I do if there is a water leak in different parts of the radiator during heating?

At the beginning of the heating season every year, it is the peak after-sales season, which is basically a leaky after-sales season, why not have water in the radiator when heating, but it is not leaky? Because after the heating starts, the pressure of aquatic products in the radiator is easy to appear at this time, and the radiator trachoma is prone to dripping and leaking.

Jin Jin today specifically analyzed how to deal with and deal with radiator leakage in different situations.

1. The radiator leaks or bursts.

If the radiator is leaking, you can place a container with water under the leak, and if the water is splashing around, you can wrap the leak with a towel and lead it to the container containing water.

Then you need to find the sub-control valve, close it immediately, and call the property maintenance personnel or heating company's service in time**.

If the radiator bursts and leaks, it will be more troublesome, in this case, the user should close the valve, and use thick towels, rags and other more absorbent items to block the leakage, reduce the flow of water, reduce the loss caused by hot water gushing.

Then call the property maintenance personnel** or the maintenance of the heating unit to which you belong, and ask a professional to repair it.

Second, the radiator sand hole leaks.

When there is a sand hole leak in the heating pipe, you need to wrap a towel or rag around the pipe and leave a section to put it in the basin to direct the water into the basin.

If you have a bicycle inner tube at home, you can cut it into a section about 1 cm wide and about 50 cm long, pull the inner tube strip hard at a distance of 3 cm from the trachoma, and then wrap it around the trachoma for 3 cm, and after 3 to 5 days, the trachoma will automatically rust to death.

3. The radiator exhaust valve is broken and leaking.

The internal connection of the exhaust valve is thin, and if it is not operated properly, it is easy to break, resulting in water leakage.

Once it breaks, don't panic, you can find a round chopstick, use the chopsticks as a wedge to drive into the leak, and then ask a professional to repair it.

Fourth, the radiator wire mouth, valve and other connections leakage.

There is a rubber ring at the connection between the radiator wire mouth or the valve, which will cause water leakage at the connection of the heating pipe due to the principle of thermal expansion and cold contraction.

In this case, the general water pressure is not too large, the user can use a towel or rag to gently wrap the tube on, leave a section and put it in the basin, let the water flow into the basin, and then find professionals to repair, do not deal with the maintenance by yourself, once the operation is improper, the connection disconnection will cause you greater losses.

If there is a leak in the pipe fittings, then replace the pipe fittings, and if there is a trachoma leak on the radiator, then replace the radiators. Rubens Heating hopes to help you.

What can I do, if it leaks, it means that the radiator is broken, and it should be replaced and repaired quickly. Usually, the radiator originally has water, which is used to isolate oxygen and slow down oxidation.

Summary. Second, the radiator is easy to leak if it is not maintained, and the radiator will be the same. Users should pay special attention to the maintenance of radiators to prolong their service life.

Here are a few reminders: 1. During the heating period, the user should not put the water in the heating sheet privately, and should take the measure of "full water maintenance" when the heating is stopped. 2. When the radiator is installed indoors, attention should be paid to avoid bumps and scratches, and if the surface paint film of the radiator falls off, it should be repaired as soon as possible, otherwise it is easy to be corroded.

Is the leakage of the radiator related to the air supply?

Hello dear and happy to answer for you. The answer to your question is as follows: radiator leakage has nothing to do with air supply. The reasons why the radiator leaks are as follows:

1. The water quality is not up to standard, the radiator is corroded, and the radiator has certain requirements for water quality during use. We all know that the main components of water are hydrogen and oxygen, and when the oxygen content in the water is too large, it is easy to react with oxidation and corrosion of the pipe wall in contact with it. If the user does not use water that meets the standard when using it, in the long run, the radiator pipe wall will be corroded severely, and it is naturally prone to water leakage accidents.

Second, the radiator is easy to leak if it is not maintained, and the radiator will be the same. Users should pay special attention to the maintenance of radiators to prolong their service life. A few reminders here:

1. During the heating period, the user should not put the water in the heater privately, and should take the measure of "full water maintenance" when the heating is stopped. 2. When the radiator is installed indoors, attention should be paid to avoid bumps and scratches, and if the surface paint film of the radiator falls off, it should be repaired as soon as possible, otherwise it is easy to be corroded.

In addition, mixing radiators can also cause radiators to leak. Radiators are different from other electrical appliances, radiators of different materials are mixed, which is easy to electrochemical corrosion under high temperature, and it is easy to cause water leakage of radiators.

Summary. Pro, radiator leakage generally can not be repaired with glue or other things, even if it is repaired, it is only temporary to prevent water leakage, the fundamental solution is to replace the radiator. If the radiator pipe is leaking, replace the pipe.

Pro, radiators leakage generally can not be repaired with glue or other things, even if it is repaired, it is only a temporary prevention of water leakage, and the fundamental solution is to replace the radiator. If there is a leak in the warm land-based gas sheet pipeline, replace the pipe.

1. When there is a leakage of the radiator at home, the first thing you need to do is to turn off the water inlet valve and the back noise valve of the radiator, if the radiator pipe is leaking, you need to turn off the main control switch. Generally, the off switch is screwed in a clockwise direction. If you find that the valve is closed, the water leakage of Brother Zhouhui has not decreased, it means that the wrong valve is closed or the valve is broken.

2. Use a towel to block the leaking position, and then use a water basin to put it under the leaking position to prevent the envy board at home from getting wet. 3. After doing the basic remedial measures, the user should immediately call the heating maintenance personnel and immediately call someone to repair the leaking radiator.

Hello dear! Glad you searched for questions! Will the heating line seep water if it breaks before it is heated:

Under normal circumstances, due to the heating pipe being idle for nearly a year, the pipe interface may be aged, rusted and other phenomena, resulting in water seepage at the nozzle. Or it may be a leakage caused by broken pipes or loose connections around the sail joints. If there is water seepage around the pipe mouth, the pipe sealing material should be replaced and the pipe should be re-fixed; If the pipe is damaged, it should be judged according to the material of the pipe, some materials with wide leakage can be welded by thermal welding, and some need to be replaced as a whole.