What do new users need to pay attention to when installing radiators for the first time?

For new installers, use radiators for the first time.

Heating, be sure to carry out a detailed inspection of the radiator system, to see if there is any running, leakage, leakage, etc., to avoid unnecessary impact on the room, such as the inspection of the above problems, must find professional maintenance personnel to come to the construction, to avoid unnecessary losses. So, what do you need to pay attention to when heating for the first time? Let's follow the golden flagship flag brother to find out.

Because of the walls, floors, ceilings.

And the indoor temperature is low, so I feel that the temperature never rises when I use it for the first time. This is quite normal. When encountering such a phenomenon, first adjust the heating valve to large, and then adjust it to the appropriate temperature after the indoor temperature stabilizes, so that the indoor temperature can rise quickly.

For the installation of radiators in a decorated house, it is necessary to avoid placing the items in the house around the heater, because the radiator is radiant heat dissipation, if there are too many items around, the radiator heat dissipation is not good, which affects the radiator heat dissipation effect.

This point is extremely important for the users of surface-mounted radiators, do not violently collide with radiators and pipes, although radiators and pipes have a little ability to resist blows, but it is still easy to cause radiator surface damage, grooves and other phenomena. In addition, heating pipes are prone to damage and leakage.

There is also the installation position of the radiator is generally required to be constructed after the preliminary design and planning, so after the radiator is installed, generally do not change the position of the radiator, the general installation position of the radiator is conducive to the radiator heat dissipation convection, can ensure the temperature balance of each area in the room to a large extent, so once the radiator position is changed, the loss is not small.

Do not block the heat dissipation space of the radiator.

In order to ensure that the radiator dissipates heat well, try to ensure a certain amount of heat dissipation space around it, and do not pile up sundries. Do not block the front of the radiator with a sofa or cabinet to avoid damaging the furniture. Excessive decoration not only affects heat conduction and air convection, reduces the heating effect, but also is not conducive to timely detection of the use of the radiator.

Do not let out the hot water in the radiator.

If there is air in the radiator, there may be uneven cold and heat, and the gas accumulated in the pipe is generally discharged and water needs to be discharged, but the water should not be put too much, and there is a stable columnar water flow out. In order to achieve good maintenance, antioxidation and heat conduction, the water in the heating is added with chemical agents, which may have an impact on human health.

Instructions for the correct use of radiators:

1. The radiator is fully watered for maintenance. Central heating needs to be closed within 1 day of heating shutdown, and the heating inlet and outlet valves should be closed.

2. The running wind should be in a closed state.

3. Do not shake the heater, and the heater and pipeline should not bear weight.

4. Non-professionals should not change the heating.

5. The valve should not be opened and closed often during the heating season. The valve can only be fully open or fully closed.

6. When there is water leakage, the water inlet and return valves should be closed immediately.

7. Check whether there is water leakage in each interface within three days after the heating is stopped.

During the heating period of the new community, there are many problems with the radiators, such as some radiators are not hot, etc., today I will explain to you the problems and solutions of the heating radiators in the new community.

Problem 1: The radiators start to heat, some radiators are hot, some are not. This is a common problem in many new communities, due to clogged heating pipes.

Users can find a professional plumber to exhaust and flush, and the problem of the radiator not heating can be solved. Generally, new communities have two heating seasons of warranty, and owners can find solutions to problems after they occur.

Problem 2: The radiator was still hot when it was just heated, and then the temperature dropped. The quality of heating facilities in some new communities is poor, and the radiator pipe network is prone to bursting, and the hot water is leaking, and the cold water is supplemented, and the heating effect can be imagined.

There is also the case that the operation of the heating system is unstable in the initial stage, and the owner can usually solve this problem by exhausting the air. However, the exhaust should also be appropriate, unscrew the air release valve until there is water flowing out, do not release water endlessly, which will cause the system to replenish cold water, which will also affect the normal heating.

Problem 3: In the same building, the upstairs is hot but the downstairs is not. Now the community is mostly high-rise residential, so the heating is also divided into high and low pressure partitions, once there is a problem in a certain area, it will affect the heating quality of other owners in this area.

Problem 4: The radiator at home has been changed, and it is not hot in winter. Many new communities for the overall beauty of the home style, will be the original good radiator modification, due to the purchase of radiator product quality or the construction team is not professional enough and other problems, resulting in problems in the operation of the system, will cause the radiator is not hot problem.

1. The first heating should be done in advance to do a good job of pressure test The pressure test notice of the heating company is to allow residents to check whether the home improvement radiator is faulty and leaking in advance, 2. Clean and clean up the covering in time for the problem that the heating temperature of the old user is not as good as a year, and many times only need to clean the radiator can be improved; In addition, there are many residents who occupy, press, and cover heating equipment because of decoration or bad habits, which not only affects the first time to find problems, but also affects indoor heat exchange because of covering, thereby reducing the quality of heating.

3. Many owners have strong hands-on ability to find problems that must be repaired by professionals, but due to the lack of professional knowledge, it often seems to be a simple problem, and improper handling will also cause heavy losses, especially after the heating modification, it is necessary for professionals to test, so as not to cause water leakage, which wastes time and reduces efficiency.

Summary. <>

Hello, dear, very happy with your question, how to do the first heating of the radiator in the new house? To help you find out, how to heat the radiator of the new house for the first time? 1. The pressure test notice of the heating company is to allow residents to check whether the home improvement radiator is faulty and leaking in advance, I hope mine can help you.

Wishing you good health and a happy mood!

How to heat the radiator for the first time in a new house?

Hello, dear, very happy with your question, how to do the first heating of the radiator in the new house? To help you find out, how to heat the radiator of the new house for the first time? 1. The first heating should be done in advance to do a good job of pressure test work, and the pressure test notice of the heating public field is to let the residents check whether the home improvement radiator is faulty and leaking in advance.

Wishing you good health and a happy mood!

1. The first heating should be done in advance to do a good job of pressure test The pressure test notice of the heating company is to allow residents to check whether the home improvement radiator is faulty and leaking in advance, 2. Clean and clean up the covering in time for the problem that the heating temperature of the old user is not as good as a year, and many times only need to clean the radiator can be improved; In addition, there are many residents because of decoration or bad habits, occupy, pressure, cover heating equipment, which not only affects the first time to find the problem, but also because of the cover to affect the indoor heat exchange, thereby reducing the quality of heating 3, find that the problem must be repaired by professionals Many owners have strong hands-on ability, but due to the lack of professional knowledge, to the base of the seemingly simple problem, improper handling will also cause heavy losses, especially after the heating modification, it is necessary for professionals to test, so as not to cause water leakage, This wastes time and reduces the trade-off ratio.

Decorate a new house, water and electricity pipes are one of the important ones, and the decoration and acceptance of heating are also indispensable, Jinjin today tells you a few precautions for the installation of radiators, so that you can easily accept the stool slowly, no worries. Let's follow the golden flagship flag brother to find out.

Key word: Precautions for newly installed radiators.

1. Check the safety and stability of the radiator installation.

Check whether the radiator pipe installation is firm and safe from the appearance of the jujube empty mold, the pipe shall not be corroded or bent, and the pipe fittings are not randomly buckled, broken wires and inaccurate angles.

2. Pressurization test.

The safety and tightness of the heating system is important, and when the house is accepted, the radiator must be pressurized test, and attention must be paid not to the place where there is water leakage, and pay attention to whether there is water seepage in the upper and lower pipes of the heating system and its valves.

3. Check whether there is a release valve.

The radiator should be released above the valve, and the acceptance should be unscrewed to test, if there is a phenomenon that cannot be screwed, it should be repaired immediately, otherwise the gas can not be discharged, which will cause the radiator to not be hot, affecting the normal use of the heating period.

4. Check the slope of the inlet and return pipes.

When the radiator is installed, the slope of the inlet and return pipes should meet the requirements, and the level, pull line and ruler can be used to check or measure the record.

The installation of radiators mainly pay attention to these two places on the socks to point to the line, but a good omen first choose a good radiator mold rental installation location, and then is to choose a good point of supporting pipe fittings, Rubens heating hope to help you.

3 This time is better in November, because this time is in the heating shutdown period, and it is also the time to renovate the house.

There is central heating in the north, even if it is snowing outside, the house is warm like spring, but the south is different, the cold season in the south is not long, and the central heating is not suitable, so the independent heating of the family driven by the natural gas wall-hung boiler system began to rise in the south.

Whole house radiators: the most convenient and energy-efficient heating system.

The radiator is fashionable, fast, convenient and energy-saving, and is deeply loved by consumers.

Speed: It only takes 10-30 minutes to turn on the heating up.

Energy consumption: Low energy consumption in areas with large temperature changes (such as Hunan).

Constant: The temperature fluctuates little depending on the air temperature.

Floor: Mounted on the wall, the floor can be made of any material.

Cost: The cost of the system is higher than that of floor heating, but there is no backfill, and the overall cost is low.

Ceiling height: A suitable flat floor room, used in a house with higher space, consumes more energy than underfloor heating.

Comfort: Foot comfort is lower than underfloor heating.

What are the main types of radiators in China?

1) Cast iron radiator: column type, airfoil.

2) Steel radiators: plate type, column type, pipe column type, string type, fin tube type, bathroom type, steel and aluminum composite column airfoil.

3) Copper tube radiator: copper-aluminum composite column airfoil, copper-tube aluminum sheet convection type, bathroom type.

4) Aluminum radiator: aluminum column airfoil, cast aluminum column type.

5) Stainless steel radiator: stainless steel column airfoil, bathroom type.

heating system composition.

Heat source + terminal equipment + control system + pipeline system.

Heat source: that is, the system host, wall-mounted boiler, floor-mounted boiler, heating and hot water dual functions;

End: The equipment is the heat dissipation medium, such as radiators, floor heating coils, fan coils;

Control: including host control system and terminal control system;

System piping: It is a heat medium transportation, connecting the host and the terminal equipment, and the optimal design of the pipeline system is an important guarantee for the normal and good operation of the heating system; It is also the embodiment of the professional level of the HVAC company.

Today's families pay more attention to the quality of life, and more and more floor heating and radiators are used in winter heating methods, radiators can be installed in new houses and old houses, but there are also many skills in the installation of radiators, and you can get a comfortable heating effect if you master it, on the contrary, you will leave a lot of hidden dangers if you make a mistake.

The following points need to be paid attention to when installing radiators:

1. Pay attention to the location of the installation, generally speaking, the radiator should be installed under the relatively low window sill, which is conducive to indoor convection, and can also heat the cold air from the outside, and also pay attention to the heating installation should not be too close to the furniture at home, otherwise it is easy to cause the deformation of the furniture, and it is easy to crack if it is wooden furniture.

2. When installing heavy radiators, we should pay attention to making a ground support for the radiator, sometimes the weight of many radiators is heavier, but many people will not install the floor bracket because of the trouble, which is actually not right, it is still necessary to do the ground bracket when installing the radiator, and remember not to mix different materials in the selection of radiators, otherwise it will also affect the stability of the heating!

3. Finally, it should be noted that in addition to the radiator is very important, other accessories are also equally important, and unqualified accessories are easy to have the risk of water leakage, so when buying accessories, you should also pay attention not to buy some inferior accessories in order to save money, and it is really worry-free when you use them in the future!

For many people, buying a house is a great joy in life, but in addition to telling each other, have you ever paid attention to the heating problem of the new house? Follow Jinjin to understand the following seven heating problems of new houses, which is likely to improve your quality of life to a higher level!

Pay attention to the configuration of the radiator, and generally calculate the heat load according to the amount of heat dissipation required per square meter. For example, if the heating energy of the district meets the standard working conditions required by the national standard, that is, the inlet water temperature can reach 95 degrees and the outlet water temperature is 70 degrees, the general configuration is 70W; However, in general, it cannot reach the standard working conditions, so it is necessary to increase the configuration, and it is recommended that you should at least configure it according to 100W;

To see whether the type of radiator is safe and comfortable, the installation position of the radiator should be reasonably arranged in a large room, and the heat dissipation should be evenly dissipated and safe and comfortable;

If the house has adopted heat metering, you should pay attention to whether the radiator has an adjustable temperature control valve, which can control the room temperature, so as to save money and convenience;

If the house does not use heat metering, you should check whether the installed radiator is suitable for heat metering. Heat metering charges are the general trend, but not all types of heat sinks are suitable for heat metering.

Find out if the radiator is decorative and how long it lasts. Some real estate developers only use radiators as necessary facilities, without thinking about whether they are beautiful and durable, and after buying such a house, buyers will have to renovate the radiators that are not beautiful, and replace the radiators that are not durable.

Radiator material, water quality of heating system and control method. The water quality requirements of radiators of different materials are as follows:

Wall thickness δ = steel radiator: pH = 10 12;o2≤；

Copper tube (extruded and stretched copper tube) products: pH=7; cl-、so42-≤100mg/l；

Aluminium products: pH=5; cl-、so42-≤100mg/l；

The steel pipe radiator with a wall thickness of δ can be unified with the steel pipe used in the heating system;

Steel and aluminum products with reliable internal corrosion protection can be appropriately expanded according to the reliability of the treatment process.

Therefore, when buying a house, we should not only pay attention to factors such as house type, orientation and environment, but also whether the house is energy-saving, the choice of radiator and other issues that are directly related to the cost of use are also crucial.