The house was not warm in the last heating season, how to install radiators?

Installing a set of radiators in an already renovated house is a nine-step process. There are strict standards for every step of the way. Let's follow Brother Jin Flagship to find out.

On-site disclosure: At the installation site, the construction personnel will pave the plastic film to do a good job of on-site protection.

Mark the location of the hole: The on-site construction personnel will help the owner dismantle the ceiling and observe the best location for the hole.

Drilling: It is inevitable that there will be mud water when making holes, but professional construction will achieve good protection.

Installation of the main unit and thermostat: According to the actual situation, install the main unit and thermostat in the most suitable position.

Heatsink installation: Installing a heatsink in the room is also the terminal of the whole system.

Water pipe laying: Water pipe laying is a very important step in the whole system.

Connecting the system: After the system is connected, the installation process is completed, after which it is time for the final commissioning.

Commissioning: Workers will exhaust the air in the radiator and start to use and effect adjustment.

Completion sign: After the construction is completed, we will also help the owner restore the furniture and kitchen and bathroom ceilings.

Is there anything special about the distribution of pipes for installing radiators?

The installation of radiators involves the distribution of pipes, and if the design is not good, the home will be full of exposed pipes, which requires the designer to make a plan according to the situation. Generally speaking, the positioning, size and direction of the heating equipment and the direction of the pipeline should be as concealed and reasonable as possible, and the pipeline system should be arranged as far as possible in the position of the yin angle line and baseboard, the more concealed the better, and at the same time, it should also take into account the original decoration.

Is there a requirement for the installation height of the radiator system?

The ideal height for radiator installation is generally 30-40 cm, if the radiator is installed too high, it will increase the air flow rate and reduce the comfort of the human body.

Does the radiator need to be turned on 24 hours a day?

The radiator heating speed is very fast, and it can be turned on 24 hours a day. However, turning on the radiator 24 hours a day can actually save energy, so it is more recommended to use this method, and at the same time adjust the temperature and range of use according to the demand.

In the last heating season, the house was not warm, and the radiators were installed, I think this should be the kind of person you can ask about the kind of home decoration, they should be able to know where to put it, he is the hottest.

Warm bai installed at home

To deflate and other DAO methods.

1. The radiators are not hot enough, and the general reason is that the temperature of the heating is not enough. This requires neighbors to consult and communicate with each other, whether there is no hot phenomenon, to determine that it is not hot, just find the heating unit, and in 2011 has been stipulated that if the indoor temperature of the heating is not up to standard, you can apply for a refund of the heating fee.

2. Gas accumulation. The indoor heating part is not hot because the radiator has gas in the area, which causes the phenomenon of "gas blockage", and it is recommended to vent the radiator.

3. If only the radiator in your home is not hot, then you have to check the reason, whether the heating at home was hot last year, so as to determine whether there is a problem with the installed pipes, if it was hot last year, it is not hot this year, you can check whether the valve and temperature control valve of the radiator are opened. If it still doesn't work, it should be that the radiator is blocked, and you can find a professional cleaning person to clean it.

4. Hydraulic imbalance. Some radiators are not hot, but the hot ones are turned off and the ones that are not hot can be heated up, a phenomenon called hydraulic imbalance of the indoor circulation system. To deal with this situation, the room system can be adjusted to turn off the hot heater first, let the non-hot heater heat up, and then slowly turn on the hot heater.

5. If the radiator has several groups of hot and several groups are not hot, or check whether the radiator valve is open, this reason is generally that the radiator is collected in the gas, so it is recommended to release the radiator.

This question is more troublesome for you, your home should be a bungalow.

Check whether there is gas in the heater first, and then exhaust the air first. If exhaust still doesn't solve the problem, take a look at the advice below.

In the current situation, the best solution is to change back to two sets of heating in series, one for water inlet and one for backwater, and then add a circulating pump to the return water to force circulation. It is possible that there is dirt inside the heater so it stops the circulation, and it may get better if you add a pump to force it. The old heating is prone to such a problem, and the forced pump can improve the thermal efficiency than relying on its own circulation, but when adding a circulating pump, it is recommended to make a circulating pump and the raw water pipe in parallel, so that if the heating can be circulated by its own pressure, you can turn off the circulating pump valve, and if the circulation needs to be forced to circulate, you can close the valve of the original pipeline.

Be flexible. Generally, the soil heater is stored and the pipe is more chaotic and the circulation is not smooth, and the heating must be ideal, and it is necessary to master the relevant knowledge of thermodynamics.

Hope it helps.

The heating installed at home is a group of music, and I don't know what to do? Then I may have a problem with the air conditioner, you can call that master to help you fix it.

What if the heating is installed in the home, and one group is not hot? Find a repair man for renovation to show you, which one is not hot will definitely solve the problem.

It seems that you did not install an automatic exhaust valve on the hot water pipe when you installed it, so I would like to give you a suggestion to install an automatic exhaust valve in the other upper corner of the last group of radiators, and it should be OK! Without an exhaust valve, it can be replaced with a hot melt tube. It is higher than 20cm higher than adding a water bucket.

There are two groups of heat for the floor heating installed at home, what is the reason why the two groups are not hot?

It must be that the pipes are blocked, and the circulatory system has not succeeded in forming a loop.

It's very obvious that you're not hot bai

There is air in that group of radiators, and the hot water can't pass, you want it.

DAO connects an exhaust raft to the upper interface of the radiator's water outlet, and after supplying hot water, open the exhaust raft to exhaust the air, and it will heat up immediately. My family yesterday in the living room radiator installed a new set of new, after sending water, the lower half of the radiator is hot, the upper half is not hot, I began to think that the radiator is too long, the pressure is not enough, but the supply is a big heating, there should be no such problem, and then I saw that there is a small rose that can be exhausted at the outlet, and some air is discharged immediately after opening, and the radiator will be all hot immediately. You can exhaust the gas, it should be the top of the gas.

It is the identity of generosity, and the identity of the identity of generosity.

Radiator. The increase needs to be decided according to the water pressure.

In fact, if you want to add additional radiators to a centrally heated house, you need to go through the water pressure of the house, because the water pressure may be different for each household.

If the water pressure of each Meihe can withstand more radiators, it is actually possible to increase radiatorsIf there are some people whose water pressure cannot withstand more radiators, then it is best not to add more radiators, because if more radiators are added, it will also lead to poor water flow, and the radiators are not too hot. Winter in the north is actually very cold, so the most important thing is to ensure that the radiator is in the hottest state.

Centrally heated houses do not require additional radiators.

The house with central heating is actually already installed, with radiators or heating facilities, and if you move in, you don't need to add another radiator.

Now the house facilities and equipment are actually very complete, especially in the north heating system has been very perfect, so basically it can be said that every household is a house heated by heating facilities and equipment, basically there is no need to add more radiators, of course, some people want to add another radiator, it is necessary to go through the heating company to test before it can be installed.

Central heating of the house is possible to add additional radiators.

In fact, the central heating house can add radiators or replace radiators, because if you feel that the heating in your room is not enough, or the radiators in your home have been used for a long time, you can replace them.

Most areas in the north now have heating facilities, so some homes have radiators that have been used for a very long time. In this case, it is recommended that you first remove the radiator in the home, and then install a new radiator, because if the radiator is used for too long, there will be some aging and corrosion inside. These phenomena will cause the radiator to be no longer so warm, and the long-term old radiator will be prone to water leakage and bursting.

No, because the temperature in the central heating house is enough for your daily activities, if you add radiators, it will cost some more, which is not cost-effective.

No, this is because the central heating house is at a moderate temperature and does not need to add radiators. It's going to feel warm.

I don't think it's necessary, because the house with central heating is already warm enough, and there is no need to add additional radiators, which is a bit of a waste of resources.

Not very needy, because of central heating, the heating must be hot enough, if you add additional radiators, first of all, the space at home will become smaller, and the radiators are not beautiful enough too much and not good-looking.

This is based on your own practical needs, and if you can, of course, you can install additional radiators at home.

No, you don't. The heated house is already very hot, and there is no need to add additional heating equipment, which is a waste of resources.

No, because the heating provided by the central heating is very sufficient, and the house is very tight, so the temperature is enough for people's lives.

I don't think it's necessary. Because central heating is already hot. Therefore, if you add radiators, it is not very recommended.

If the home is not warm, there are several possibilities, one is that the heating temperature is not high, and the other is that the house insulation and airtightness are not good. It is also possible to connect a group on the basis of the original. The specific can be with your needs, but pay attention to try to use radiators of the same material, Rubens heating hopes to help you.

If you feel that there are too few radiators at home and are not hot enough, can you add new radiators to the original radiators? This is a message that Jin Jin often receives, and it is also a common problem during heating now. This makes users very anxious, so Jinjin will tell you how to add a radiator to the original radiator:

Let's think about why we want to add radiators?

1. The radiator is not hot, and there is a problem with the quality, resulting in poor heat dissipation effect.

2. The number of radiators is too small, and the heat dissipation effect is not achieved.

For the first reason, there are many reasons why the heating is not hot, the quality problem is one of them, the heating quality problem may be the water pipe inside, there is a leakage, etc., Jin Jin has also written about the reasons why the heating is not hot, and how to solve the problem of the heating is not hot, here Jin Jin recommends a practical radiator - anti-corrosion King Kong, super anti-corrosion, beautiful appearance is very suitable.

For the second problem, it may be that the area of your room is too large, and the radiator heat dissipation effect can not be reached, so we can add several groups of radiators to solve the problem, and the heat dissipation area is enough, but the room is still cold, which should be the airtightness of our own room is not good, we can transform the airtightness of the room.

The choice of radiators to choose a good heat dissipation effect, high thermal conductivity of radiators, quality assurance and high after-sales protection of radiator manufacturers, now popular is a new type of radiators, steel radiators, copper and aluminum composite radiators, we buy radiators in combination with their own residential environment and home layout.

The first situation is the need to increase the number of radiators in our rooms. At this time, it is likely that the radiators in our homes are too small to meet our indoor heat dissipation needs? At this time, I personally recommend that you can consult with the radiator sales staff or professional HVAC personnel, and then buy the radiators for our indoor needs according to the requirements.

The second situation is to try to talk about some measures to keep our houses insulated. For example, our home was originally installed with ordinary plastic steel windows, covering the acres, so at this time, I personally recommend that you replace these plastic steel windows with double-glazed glass, or even triple-glazed windows, which will improve the level of insulation. In the same way, we can deal with our entrance doors and our walls as much as possible.

The third situation is to see if the radiator is installed in the correct position. The so-called incorrect installation position of the radiator here means that there are many families that embed the radiator in the wall and install it, which seriously affects the heat dissipation of the radiator. Personally, I suggest that you must install the radiator when decorating your home.

Otherwise, it will be difficult for our indoor warmth to rise and will have an impact on indoor air quality.

There could be the following reasons:

The radiator is not turning on or is not properly adjusting the temperature.

The radiator needs to be vented to ensure that the hot water circulates smoothly.

Radiators may need to be cleaned to eliminate dirt and debris that has accumulated inside.

The room may not be insulated enough, resulting in heat loss. Striker.

The heating system may be faulty and need to be repaired or replaced.

It is recommended to check the above problems, if it cannot be solved, it is recommended to contact a professional heating maintenance personnel.