What should I pay attention to when installing Changtian floor geothermal floor?

Precautions when installing underfloor heating:

1. The concrete floor (heat storage layer) poured in one piece should be smooth, and the height deviation should not be greater than 5mm;

2. Before laying the floor, it is best to take the heat source for a test run, and spread some newspapers on the floor when trying. If the newspaper is obviously wet, it means that the concrete has not dried thoroughly, and it is not advisable to install the floor at this time, otherwise the emitted moisture will accumulate under the floor, making the floor damp and mildew, and discolored;

3. The floor heating floor is generally suspended pavement, so the flatness of the floor must be good, and the inspection can be done with the longest aluminum profile, and it is not suitable to use the water splashing method to check before paving the floor (in the early stage of floor solidification, this method is generally used for leveling, which can ensure the flatness of the level and the entire plane), if there is an obvious uneven place, it is still necessary to make up for it, and it is not suitable to wet the construction, and it can be landfilled with sand.

4. The buffer layer is generally made of non-woven fabric, and it is very important to choose a slightly layered material with good porous air permeability, and it is not appropriate to lay the floor directly on the floor.

5. The socket between the floors is glued, and the parts that need to be fixed must be fixed on the wooden piles embedded in the floor in advance, and must not be fixed on the concrete floor.

That's all for the main precautions you can remember, I hope it helps you.

I have carefully understood that Changtian solid wood geothermal floor is made of OEM I can't do it with this I learned a fur from others There will definitely be a problem when I install it, so don't be fooled.

My home was renovated last year, and installed the Pan American solid wood geothermal floor and the German Vaillant geothermal system, because it was immediately moved in after the decoration, so I gave up the cheap laminate flooring and chose the environmentally friendly solid wood material, if it is a solid wood geothermal floor, pay attention to a few points:

It is best to lay with adhesive buckles, do not use keels, hitting keels will cause some space between the floor and the floor pipes to be filled with air, and air is a poor conductor of heat, which will cause the heat of floor heating to be dissipated;

Solid wood flooring must be professionally designed for floor heating, because solid wood floor heating flooring will dry the moisture in the solid wood to a certain proportion, and then the splicing adopts the splicing technique of concealed seams, which can avoid the cracking and bulging of ordinary solid wood floors.

Installation tips Geothermal floors should be heated in strict accordance with the procedure.

After 24 hours of installation, gradually heat up, and be sure to keep the floor clean and dry before heating up to prevent the floor from cracking and twisting due to rapid heating.

When using geothermal heating for the first time or not turning on for a long time, it should be set to the lowest temperature first, and then slowly heat up, preferably about 1 per hour, so that the wooden floor gradually adapts to the temperature rise. If the heating is too fast, it may cause the wood floor to heat too quickly, resulting in unstable twisting and cracking changes, and affecting the service life of the wood floor.

As far as possible, do not make fixed decorations or install legless furniture on the wooden floor of geothermal heating, so as to prevent local heat dissipation from being smooth, and the heat is stuffy at the wooden floor, which is easy to cause the floor to be deformed due to uneven heating.

Ruicheng floor professionals warm answer: as a floor installation of geothermal heating with water circulation, the quality of ground treatment will play a decisive role in whether the geothermal heating system can be used normally in the future. Before the installation of the floor, the treatment of the ground should be strictly in accordance with the European DI-N4725 standard, and the floor installation must also strictly implement the European DI-N18305 standard to ensure the normal use of the geothermal heating floor.

In addition, the installation of geothermal heating floor, there is also a problem to pay attention to is the floor mat, be sure to use the geothermal special paper mat, this kind of floor mat has the characteristics of fast heat conduction, no deformation, etc., and can not use ordinary foam mat. Foam mats conduct heat slowly, and they are prone to produce harmful gases under the action of high temperature for a long time, which endangers the health of consumers. At present, in the installation of geothermal floors, imported floor mats are mostly used, and domestic paper floor mats are easy to deform when heated, causing floor damage.

Leave room for expansion in the corners of the wall, so that the floor does not arch.

1. Ground treatment.

The main mold closure is to remove the moisture in the cement floor. If the moisture in the cement floor is not removed before the floor is installed, once heated, a certain moisture shock wave of the decoding chain will be generated, which is the main reason for the cracking of the geothermal floor. Germany has also developed a DIN 4725 floor standard for geothermal flooring.

2. Geothermal floor installation technology.

In order to ensure the installation quality of the geothermal floor, there is a set of strict installation standards for the installation of the geothermal floor, which mainly has strict requirements for the installation environment, installation time and installation process, so as to ensure the overall quality of the geothermal floor.

3. Strict accessories for geothermal flooring.

There is also a key detail of the geothermal floor, which is the floor mat of the geothermal floor. The deformation of the floor mat can drive the deformation of the floor. With PVC foam mat, one is slow heat conduction, and the other is easy to age after long-term heating.

If you use a special floor mat for geothermal flooring, one is fast heat conduction, the other is environmental protection, and the third is not deformed.

That's itOppai flooringFor your question, I hope it can help you, hopefully, thank you!

1.After the leveling cement is plastered, it must wait 21 days before it can be heated.

2.The heating starting temperature can only be selected at 25 and kept for 3 days.

3.Warming up to the highest temperature at a rate of 5 per day (this step is not seasonal).

4.The room must be kept heated for 72 hours at the highest temperature, and the room should be ventilated frequently during the heating process.

5.Cool down at a temperature of 10 every day until the surface temperature is 18 before installing the floor.

6.Delivered to the user 48 hours in advance to acclimatize to room temperature.

7.When installing, the surface must be dry, and the indoor humidity should not be excessive.

1.The screed must be dry before installing the wooden floor. Otherwise the floor will bulge, which is very important.

Generally, the screed should be dry for at least 20 days (to avoid nest workers, during which you can do its grip and other construction), and it should be longer in winter, not that the eyes see that the surface is dry and it is really dry. Self-leveling is not faster than the leveling layer, the solidification speed is faster, and it is thinner, so the drying period is shorter, about 3 days.

2.In winter, the evaporation of water is slower, here is a simple test method: find a piece of plastic wrap (not too big), put it on the plane, seal the surroundings with tape, and the friends who are heating at home should test whether the heating system is operating normally in advance.

If not, it means it is dry.

3.The floor should be entered 1-3 days in advance to adapt to the pavement environment. In winter, the temperature difference between various places is large, so it is necessary to adapt the floor to the environment to be paved in advance, otherwise it is easy to have unnecessary deformation.

This is very easy to understand, and generally manufacturers will load the material one to two days in advance to adapt to room temperature.

4.Especially in our community, floor heating, after the floor is installed, the floor heating should not be turned on very much at once, and it must run at a low temperature for a period of time. This protects the underfloor heating, the screed underneath the floor and the wooden floor!

5.After the formal heating, it is best to put a humidifier in the home, or put a basin of water. After heating, the indoor air will be drier, and the floor will not only be afraid of moisture, but also afraid of dryness. In short, the right humidity is the best.

The installation of geothermal floors is just a multi-layer geothermal film, and there is nothing special about it. It's just certain concepts that have the potential to be hyped.

Material selection misunderstanding: all floors should be used as carbon fiber electric floor heating floors.

When we walked into the floor mall, for the irresponsible shopping guide, no matter what material you asked about the floor, he could make a floor heating floor. Many consumers who do not know the situation mistakenly believe the words of the shopping guide, and as a result, the floor is not suitable for floor heating. Therefore, consumers should pay attention to the need to know which flooring can be used as paving on geothermal surfaces at the time of purchase.

Hongbo Tips: As a geothermal floor, it must meet four major elements: floor heating conductivity, dimensional stability, anti-fouling and environmental protection, and durability.

Generally speaking, parquet, laminate flooring, and bamboo parquet are suitable for use as geothermal flooring. Moreover, the thickness of the geothermal floor is generally 8-12mm, and the board that is too thin is more likely to be deformed, and the heat is not easy to export if it is too thick.

Construction misunderstanding: the gap is too loose or too tight.

In addition to the misunderstanding of material selection, the gaps of carbon fiber geothermal floor are not easy to control during the construction process, the gaps are too loose or too tight, and the choice of floor heating floor laying method is a single misunderstanding of carbon fiber geothermal floor laying. Some people want the floor to be more effective, so the floor seam is too small, and the result is easy to arch. Some people are afraid that the floor will expand after being heated, so they leave a little more gap, and as a result, there are large gaps when the floor shrinks, and a lot of dust is hidden.

Tips: Nowadays, with the continuous progress of science and technology, the owners of the geothermal floor laying method can choose according to their needs in addition to the suspension laying method, as well as the floor bonding method and the keel laying method. During the laying process, the seam on the surface of the floor is generally about 1cm.

Acceptance misunderstanding: The acceptance standard is low.

The acceptance of geothermal flooring is not just to see whether it meets the environmental protection standards of ordinary flooring. Many consumers will have the misconception that only need to check the floor to meet the warranty standards under normal circumstances. In fact, no matter what kind of floor, there is a problem of formaldehyde release, when it is used as a geothermal floor, after heating, it will intensify the release of formaldehyde.

Therefore, after the floor heating is installed, the floor must be environmentally friendly after the floor heating is turned on.

Tips: After the installation of the floor heating floor is completed, the key is to check the temperature of the floor. After the temperature rises, check the amount of formaldehyde on the ground to ensure that the amount of free formaldehyde released meets the standard requirements (the national standard is.

In addition, the floor temperature should not be too high during the inspection, the general ground temperature can be raised to 25, the ground temperature should not exceed 28, the limit value is 32, otherwise the floor will be bent and deformed.