Full tile and half tile, what is the difference between the two when using?

Ceramic tile is one of the most commonly used decorative materials in us, and it is also one of the essential materials. But for the classification of tiles, there are still many people who can't tell which tiles are used in **. Many people who buy tiles will say full tiles and half tiles.

Are there any differences between the two?

1.When you use it, you will find that the water absorption rate of the whole tile is slightly lower, so you do not need to soak it in water when paving. But if you choose half a tile, you need to go through a process of immersion before construction, otherwise it will affect the adhesion of the tile.

2.In appearance, the gloss of the full tile is better than that of the half tile, and the surface is smoother than the half tile. So if you want a better decorative effect, you naturally have to choose full tiles.

From the perspective of hardness, the hardness of the whole tile is relatively high, so it is more durable and not easy to break. Half-tiles are much less harder than full-tile, making them more prone to breakage.

3.The hardness of the two is also different. The hardness of the whole tile is slightly higher, it is not easy to break, the stain resistance is slightly stronger, and the flatness is better.

However, the hardness of semi-ceramic tiles is slightly lower, easy to break, and easy to penetrate, and the gloss is not particularly strong. Different construction requirements: the former must be soaked in water in advance before laying, and the latter can be directly used for tile laying without soaking in water in advance.

4.The whole tile has the advantages of high hardness, not easy to break, high stain resistance, low water absorption and good flatness. Semi-porcelain bricks have low hardness, easy to break, easy to penetrate, and poor gloss.

The water absorption rate of all porcelain is very low, and it can be paved without soaking it in water, but the semi-porcelain construction must be soaked in water, just like the red brick does not have the feeling of burning through, the cutting surface of the brick is different, and the ** is different, just look carefully. All tiles are vitrified tiles, all are porcelain, do not absorb water, and have strong stain resistance. The specifications are 1200*600, 800*800, 600*600.

The whole tile has the advantages of high hardness, not easy to break, high stain resistance, low water absorption and good flatness. Semi-porcelain bricks have low hardness, easy to break, easy to penetrate, and poor gloss.

How to distinguish a full tile from a half tile with the naked eye.

1.Look at the back.

When buying, we can observe the back of the tile in detail. If the back of the tile is very smooth and delicate, and the texture is very clear and distinct, it belongs to the whole tile. If the back of the tile is rough and there is a rustling feeling when you touch it, it belongs to the semi-ceramic tile.

2.Listen to the sound.

When buying, you can gently tap the tile surface with your fingers or tools. If the tile makes a crisp sound, it belongs to the entire tile; If the sound of the tile is dull, it is a half tile.

These two will have some different feelings when they are used, for example, the material is different, the smoothness is different, the gloss is different, the solidity is different, the effect is different, and the atmosphere is different, so you can choose according to your own preferences, I personally prefer all tiles.

The hardness of the whole tile is relatively high, but the water absorption rate is relatively low, and there is a lot of confusion when using it, and there will be a lot of water stains on the tile. Semi-tiles are particularly easy to collapse when pasting, and the water absorption is very good.

These feelings are that the degree of smoothness is different, the way of cleaning is different, the ease of cleaning is different, the laying process is different, and the degree of safety is different.

It will make a big difference. The composition of ceramic tiles is different, the water absorption rate is different, the sound is different, the water absorption is different, and the sense of use is different.

1.In home decoration, it is best to use full tiles, because full tiles are porcelain glass fossils with water absorption less than or equal to, also called vitrified tiles.

The advantages of full ceramic tiles are hardness, stain resistance, squareness, and lines, which are better than semi-porcelain, but the color is not as rich as semi-porcelain. Semi-porcelain is called glazed tile.

Semi-porcelain has high water absorption and can only be constructed by soaking in water. Good performance. The water absorption rate of semi-ceramic tiles is between that of ceramic tiles and ceramic tiles, so it combines the respective characteristics of ceramic tiles and ceramic tiles, and is very popular in the ceramic market.

Colorful. Because the common half bricks have antique bricks.

Small floor tiles (wall climbing), crystal tiles, wear-resistant bricks, matte bricks.

Wait. <>

2.They have evolved into many patterns under today's advanced manufacturing technology, so the colors and types of semi-tiles on the market are very selective and favored by consumers. All ceramic floor tiles.

The performance is relatively stable, with the characteristics of corrosion resistance and pollution resistance. Compared to its relatively thin thickness, it does not affect the strength. The weight is relatively light, so it will reduce the weight of the building. What's more, this kind of tile does not add harmful substances, so it can be environmentally friendly.

3.This kind of all-ceramic floor tile has low water absorption, high density and high hardness, so it will lead to cement mortar when laying tiles.

The problem of easy sticking is a test of the master's skill in sticking tiles. And generally speaking, this kind of tile can only be used for ground laying, not wall tiles, which is easy to lead to the problem of tile hollowing and falling off. The hardness of the whole tile is relatively high, not easy to crack, and the stain resistance and flatness are good.

Comparatively speaking, semi-ceramic tiles have low hardness, easy to break, and gloss.

It's also not particularly good and easy to penetrate.

4.The hardness of the overall tile is higher, the dirt resistance is better, and it is not easy to break, while the hardness of the half tile is lower, and the gloss is not very good after paving, and it is easy to break. So how do we distinguish between full tile and half tile when buying?

We can tap the middle of the tile with our hands and listen carefully to the sound it makes. If the sound is strong and has a long echo, it is the whole tile. If the sound echo is small, short, and muddy, it's half a tile.

The specifications of tiles are mainly determined according to the size of different spaces in the interior. If you learn these buying skills, the effect of tiling will be better.

The advantage of the whole tile is that the hardness is very high, and it is also very wear-resistant, basically it is rarely polluted, and the lines are relatively obvious, and the disadvantage is that the color is not rich enough. The water absorption rate of semi-ceramic tiles is relatively stable, and it is also very wear-resistant, and there are many types to choose from. This is not strong enough to resist fouling.

The advantages of the whole tile are very high hardness and stain resistance, it is rarely polluted, and the lines are more obvious, but its color is not rich enough, and the water absorption is also unstable, while the color and water absorption of the half tile are relatively good, and it is also more wear-resistant, and there can be a variety of types to choose from, but his stain resistance is not good.

The whole tile will be more beautiful, and the overall effect will be better, and at the same time will give people a different temperament, but half a tile, the effect may not be as good as we did when we were children, and the room may also look like a certain sharing effect, but it is more economical, after all, the time used is relatively small.

The stain resistance of the whole tile is better, the hardness and quality are better, but the overall decoration effect is poor, and it is not easy to make some multi-style decoration styles, and the tiles are likely to be poor in terms of quality and dirt resistance, but they can be very good to carry out some design.

1.The water absorption rate is different, and the water absorption rate of all ceramic tiles sold on the market refers to the ceramic tiles that are less than, which is commonly known as vitrified tiles on the market. The water absorption rate of half brick is greater than.

The hardness is different, the overall tile hardness is high, not easy to crack, high stain resistance, low water absorption, and good flatness. In contrast, semi-porcelain tiles are less hard, easy to chip, easy to penetrate, and have a relatively poor gloss. The use method is different, all tiles have a very low water absorption rate, and they can be paved without soaking in water, but half tiles need to be soaked in water to be constructed.

2.Semi-porcelain bricks have low hardness, easy to break, easy to penetrate, and poor gloss. Listen to the sound.

One hand lifts the edge or corner of the tile in the air, and the other hand taps the middle of the tile, and the tile with a deep and long echo (such as the sound made by tapping a copper bell) is an all-ceramic vitrified tile; If the sound is muddy, no echo or short echo, it means that the porcelain degree of the tile is poor, and the raw material particle size of the tile is uneven and the density is low, which is a common semi-porcelain tile. In terms of name, for example, all tiles are called polished tiles, vitrified tiles, etc. , and some are called a certain stone, a certain jade, such as cloud shadow stone, amber jade, etc.

3.These names are called full tiles. It is mainly used for home floor paving and decoration, and half of the ceramic tiles are used for wall paving and decoration.

Knock on the door and listen for sound recognition. Empty the tile by holding the edge or corner of the tile with one hand and tap the middle of the tile with the other hand. If the life produced by the tile is vigorous and has a long echo, then it can be determined that this type of tile is a fully vitrified tile; If the sound is small and short, or the sound is muddy and anechoic, it means that the tile is half tile.

Because of its poor porcelain degree, uneven particle size, low density of raw materials in the inner blank, the sound is not long enough, and there will be no echo.

4.The hardness of the tile is the main parameter, which will directly affect the service life of the tile, which is particularly important. The easy way to do this is to tap and listen to the sound.

The crisp sound indicates that the interior is of good quality and is not prone to deformation and cracking. You can intuitively judge the color difference and size, and see whether the color of a batch of tiles is roughly the same and whether they can be spliced together well. The color difference is small, and the size is regular.

1. What do you think is the difference between full tile and half tile?

2. Conclusion.

The luster is not the same, the degree of water absorption is different, the hardness is not the same, the degree of fragmentation is not the same, the texture is not the same, when decorating, you should choose the tiles that suit you according to your own family situation, and do not blindly follow the trend.

The water absorption rate is not the same, the flatness is also different, the anti-fouling ability is different, the fragility is not the same, the flatness is also different, and the difference in ** is also relatively large.

The water absorption rate is different, the hardness is different, the production method is different, the effect of laying on the floor is different, and the maintenance method is different.

What is the difference between full tile and half tile? There are also many divisions of ceramic tiles, and the use of ceramic tiles in home decoration is also relatively large. When choosing, you need to know the quality of tiles and their classification, such as full tiles and half tiles.

How should consumers discern this? For some decoration whites, I don't know that full tiles and half tiles have different water absorption. The water absorption rate of all tiles is within, and half tiles are in between.

This kind of tile with low water absorption rate can be laid on the ground or wall without soaking in water, so it can also shorten the construction time and save the decoration budget. The firing temperature is different. The temperature of all tile barbecues is above 1200 degrees, and the temperature of half tile barbecues cannot be higher than 1200 degrees.

After heating, the elongation is relatively high, easy to break, and the gloss is not good.

How to choose when decorating a new home? Full tiles and half tiles are mainly based on their water absorption when purchasing. All tiles are very hard and do not break easily.

In addition, they have good resistance to contamination and low water absorption. After the later paving is successful, it is not easy to break. Therefore, industry insiders recommend choosing full tiles to ensure quality.

When choosing floor tiles, there should be differences in materials. There are two types of floor tiles: polished tiles and glazed tiles.

Polished tiles, also called vitrified tiles, are characterized by good wear resistance and do not need to be soaked in water. Because they are smooth and beautiful, they are easier to use in the living room and dining room, and they are also easier to wipe. Glazed bricks, also known as mirror tiles, are characterized by good anti-slip performance, and the better the anti-slip effect when exposed to water.

However, it should be noted that glazed tiles are more sensitive to dust, which weakens the anti-slip effect. Because kitchens and bathrooms are susceptible to moisture, glazed tiles work well. For home decoration, it is recommended that you can choose full tiles if you have the conditions.

If you want to save some money, you can use all ceramic tiles for the floor and semi-ceramic for the wall.

All tiles will be heavier because of the greater density. The half-watt is slightly lighter and can be distinguished by sound. Tap your finger on the middle of the tile, if the sound is thick, it means that it is all tile. If it is a half-tile, the sound will be relatively low and there will be no echo.

There are many differences between all-porcelain and semi-ceramic tiles, agree with this statement. If the base layer is seriously cemented, it needs to be shoveled all and reprocessed the base layer! The bathroom wall should first confirm whether the waterproof layer is firm, if the flexibility of the painting is too high, it is recommended to clean up the general-purpose rigid waterproofing of Mengxin brushing, situation analysis:

Cement mortar sticking all tiles on the wall, to be honest, basically now there are few branches and pulleys, and the general workers are reluctant to choose this way to paste the whole tile, because the probability of falling bricks is relatively high, and consumers will think that it is a problem with the quality of workers' installation.

If there are cracks in the wall itself, it should be properly treated before tiling, so as to avoid cracking or falling off the wall bricks due to the enlargement of the cracks in the basic structure in the future; There are also cement walls to be brushed, and for the ground and wall with too large a gap in flatness or verticality, cement mortar should be used for leveling. The back of the tile must be brushed with adhesive, and there must be embedded parts on the top of each brick, so as to ensure that the tile will not fall off, and the line is simple and hollow, and now there are many bricklayers who do not pay attention to the details, and feel that it is over when they are pasted, and they do not know that the tile will fall off after a year or two after completion, so the details are very important.

The most is to use the point hanging, polish the back of the tile out of a groove of about half a centimeter, use marble glue to fix one end of the copper wire in the groove, and then plaster the back of the tile, after the wall, and then fix the other end of the copper wire on the wall. This method will not make the tile fall off easily, has good wear resistance, hardness comparable to stone, and the texture is transparent. It's the same inside and out.

This kind of tile on the wall, due to the low water absorption, it is not possible to use ordinary cement mortar, and the wall is easy to fall off, causing danger. First, brush the bottom blank of the brick with adhesive.

Design the grounding wire line first and then put bricks to ensure that the electric water heater can be connected to the ground wire and conducts it well. When tiling the wall of the bathroom, be careful not to damage the waterproof layer, because the wall is made of a waterproof layer, so the wall is smooth, and it is not easy to fall off after the tiling is done before the tiling is done.