How do you get fish from wire nets? If there are fish on the wire net, how to remove them correctly

1.The basic size of the fish in the water area to be fished is good to determine the mesh size of the sticky net.

2.Put down a good net and start to bombard the fish, shake the water surface, let the fish move to increase the net loading rate, the net between one finger is generally to catch white crucian carp less than one catty.

3.In short, the bigger the fish, the smaller the chance of catching, and the net will break if the fish does not die.

4.It is best to choose still water or a slightly slower water flow in the place where the net is lowered; And when the net is lowered, it is necessary to go down one float by one in the original order, and it is not allowed to be offside. Otherwise, it is easy to get tangled up when the net is closed, and the net will be wasted.

5.It is not advisable to collapse the net after the net is lowered, so that the net will become naturally tight in the water, and it is best to be a little loose.

6.Don't rush to reel in when you see a fish hitting the net, wait for it to get entangled.

7.When collecting the net, pay attention to the order, and do not mess up the net because of catching fish, so that the net can be lowered next time.

8.If there is garbage or grass roots on the sticky web, you must take it slowly and do not rush.

9.After closing the net, wash it and tie it in the same way as you bought it. It is also for the convenience of putting the net next time. Tie the knot and dry it in the sun.

The net is suitable for still water, slow water waters, when the net should be in the order of the floating head, a float and a float, do not offside, do not pull the fishing net too tightly, so that the fishing net remains loose in the water, so that the fishing effect will be better. 2. After the fishing net is lowered, you can also use a bamboo pole to knock on the water surface, or throw stones, so that the fish can move up to catch the fish, see the fish hit the net, do not rush to close the net, wait for the fish to be entangled, the interval between the net and the net, it is recommended to be more than one hour or longer. 3, the net should also be collected in the order of floating heads, if there are big fish on the net, you can first use the net, the fish will be copied and then carried out of the water so that the rate of running fish can be reduced, experienced fishermen, will be combined with the local water environment, season, fish to judge the depth of the fish layer, so as to correctly choose the corresponding fishing net specifications to obtain the maximum catch.

Wire mesh (sticky net) is used in a narrow place, it is best to go under the net at night, pay attention to the depth of the water, and the heavy objects on the net should not be too big and too heavy. As long as you can sink down. Steps:

1. Buy nets, according to the size of the fish that are more common in the river, such as three fingers, four fingers and the like. 2. Under the net, just like you put the line, the river can be barred if the river is not urgent, and if the river is urgent, it will go down the water, remember not to lose it, and then it is waiting, and you can also use a bamboo pole or something like the other to pick up the net to collect fish, generally the net is placed there for a few hours. 3. Collect the net, use a large basin to close the net in the way of winding the wire when putting the net, and put it away on the side with the float, and bring the fish directly to the basin.

4. Pull the net, slowly remove the grass and other things on the clean cement floor, and then tie the net again and knot it like when the net is closed, and then you can go down the net again.

The wire mesh should be pulled apart and put into the water, not tightened, and the shape is best.

You have to make some noise, like a bamboo pole hitting the water, knocking on the basin, and making the fish skewer up before they hit the net.

Depending on the target fish, pay attention to the size of the mesh.

Pull the net tightly, place the fish in the net, and pull it up.

Usage: 1Place the wire mesh in the water while pulling it up without tightening it.

A "straight" shape is preferred. 2.In general, some sounds (such as bamboo rods hitting the water and sinks) are needed to make the lines random before they can hit the net.

3.Choose the mesh size according to the target fish.

How to use:1Place the wire mesh in the water while pulling it apart without tightening it.

The shape of "straight" is the best. 2.In general, some noise (e.g. bamboo poles hitting water and basins) is required to make the line fall randomly on the net.

3.Choose the mesh size according to the target fish.

How to use: 1. The wire mesh should be pulled open and put into the water, not tightened. The shape of "zhi" is the best. 2. Generally, it is necessary to make some noise (bamboo pole hitting the water, knocking on the basin, etc.) to make the fish messy before they can hit the net. 3. According to the target fish, pay attention to the size of the mesh.

Usage: 1Place the mesh in the water while pulling it apart without tightening it.

The shape of "straight" is the best. 2.In general, some noise (such as a bamboo rod hitting the water and the sink) is needed to make the line random before it hits the net.

3.Choose the mesh size according to the target fish.

If there are fish on the wire net, how to remove them correctly and quickly without destroying the net? Thank you

If you want to take the fish down the lead edge in the net, the first thing to look at is to see which direction the fish comes from, so that you can smoothly take the fish down, and will not be cautious to destroy the net, if it is a crucian carp in the opposite direction, it will not only hurt the fish, but also collapse the desire, so you must observe and carefully look at the direction of the fish, and then take it down from the net along the head of the fish, so that the fish will not be injured, The fish often don't break, and that's the right way to do it, both to keep the net and to pick the fish.

If there are fish on the wire net, how to remove them correctly and quickly without destroying the net? Thank you

Dear, I am glad to answer for you: there are fish on the wire net, take it off correctly and quickly without destroying the fish net, the correct way to take the fish is as follows, how to take it off correctly and quickly, and it will not destroy the fish net, if you want to take the fish down the net, the first thing to do is to look at the direction of the fish from which it comes, so that you can take the fish off smoothly, and will not destroy the fish net, if it is a crucian carp in the opposite direction, it will not only hurt the fish, but also collapse the desire, Therefore, it is necessary to observe carefully and look at the direction of the fish, and then take it down from the net along the head of the fish, so that the fish will not be injured, and the fish will often not break, which is a correct way to choose, both save the net and pick the fish.

Pull the net apart and put it in the water, not too tight, then make some noise to let the fish get into the net, and after a while the net is pulled up.

The size of the mesh varies according to the average size of the fish in the water, if you are fishing for small fish, use a small mesh, and use a large mesh for large fish.

After the net is lowered, it makes a noise to lure fish. There are many ways to do this, such as hitting the water with a fishing rod, hitting a large rock or even a basin on the shore.

Wire mesh is frequently used in freshwater watersheds such as lakes, streams, ponds, rivers, etc. It can be used in both deep and shallow waters. If the water is not deep, the net is laid during the day.

After the net is lowered, use two fishing rods to put the surrounding cod liver into the net. However, if the fish are gathered in a deep position, it is not easy to operate during the day, and the wire net is more obvious in the water during the day, and the fish will not hit the net when they dodge. You can get the net off in the evening and close it early the next morning.

This is generally not done in winter, as the fish are at the bottom.