When decorating, should you scrape putty first or install the door first?

When it comes to interior renovation, the usual step is to scrape putty before installing the door. This is because putty scraping is the process of leveling and beautifying the wall, and if the door is installed first, it may cause pollution or damage to the surface of the door. In addition, sanding and painting are required after scraping putty, which can cause unnecessary damage to the doors that have already been installed.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

In the local market, the ** of scraping putty is usually determined according to the area of the wall and the quality of the putty. Generally speaking, the ** per square meter is between 30-50 yuan, and this does not include the putty**. The installation cost of the door will be determined according to the type of door and the difficulty of installation, generally between 200-500 yuan.

These ** are approximate ranges, and the specific cost needs to be determined according to the actual situation.

For decorators, it is recommended to make a detailed plan and budget before the renovation, so as to arrange the order and cost of the renovation reasonably. When scraping putty, you should choose the best putty to ensure the smoothness and beauty of the wall. When installing doors, you should choose doors that meet your needs in terms of quality and style, and ensure that the installation is firm and beautiful.

At the same time, it is also necessary to pay attention to protecting the completed decoration to avoid unnecessary damage in the subsequent decoration process.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

After the installation of water and electricity, the balcony and kitchen are pasted with wall tiles, and the bathroom is waterproof three times, and then the bathroom is pasted with wall tiles and floor tiles, and the tiles are solidified and dry, and the dust in the gaps is dryThe carpentry living room gypsum board ceiling followed; After the carpentry is finished, it is the turn of the painter to enter the site and carry out the first plaster scraping of the base leveling of all the walls; After that, wait for the suit door to followThe normal is to finish laying the floor tiles, start to measure the customized cabinets, doors, door and window covers, etc., and also start to carpentry, after the carpentry is done, start to batch the wall, paint, and then customize the cabinets, doors these come back, and start to install. Scrape putty first, which will generally make the wall very flat, so that when the door cover is installed in the future, the door sleeve line will be close to the wall, and there is basically no gap with the wall, so it looks very good.

<> is doing less now, one is that the time of the door customization is generally after the tile is pasted, the cycle of door customization will be about 30-45 days, so it is generally too late to install the door first, and now it is relatively rare, one is that the time of the door customization is generally after the tile is pasted, and the cycle of door customization will be about 30-45 days, so it is generally too late to install the door first, and the door sleeve can effectively cover the edge of the wall paint when it is fixed, and it will not affect the installation of the door cover. Also, be careful to wait for the wall paint to dry completely before installing the door.

And after the bricklayer is completed, it is necessary to stop work and wait for the wooden door. Therefore, I personally think that after the bricklayer is finished, the wall is scraped putty and painted with wall paint. The whole process of scraping putty and brushing wall paint also takes about a month, which is just the time to wait for the production of wooden doors.

The texture of the paint is not good, and the set of wooden doors processed by the factory is better in terms of technology, modeling, appearance and environmental performance, so the current wooden doors are basically the choice of factory customized set of wooden doors. Some owners are worried that the door will be soiled when painted, but in fact, the basic experienced master will take protective measures to cover the door with something like newspaper, and even if it is accidentally dyed, it can be cleaned off in time.

It must be installed first, and then scrape putty after installation, so that it will be perfect.

Putty is to be scraped twice, you can scrape the first putty, and then install the door, and then scrape the putty for the second time, when installing the door, you can use masking paper to glue the door sleeve line and the edge of the wall, so as not to scrape the putty and roll paint when sticking to the door, paint-free doors are generally waterproof and not good to scrub, and the joints of the wall and the door are carefully brushed with a small brush.

Scrape putty first, and install the door last. Because there will be a smell in the room when the putty is scraped, it will not be enough to ventilate if the door is installed in advance.

I think it should be scraped putty first, if you install the putty after the door is installed, it will make the door very dirty, and after scraping the putty, you will go to Anmen after everything is ready, which will give this home a certain security.

Of course, it is necessary to scrape the putty first, because this will make the putty more smooth, and you can also make the details better, and it will become more beautiful after installing the door.

Be sure to scrape the putty first, and be sure to install the door after the entire interior of the house is finished, and the door will not be scratched.

This should be done by installing the door first. The main reason is that the house often installs the door first, and then decorates, after all, it will cause a series of losses in the process, so it will be necessary to install the door first.

When decorating, you should install the door first and then scrape the putty, if you scrape the putty first, the door will damage the wall.

Decorate a house with putty or install the door first? After being reminded by the decoration master, I almost did something wrong.

When decorating, you should scrape the putty first and then install the bedroom door, because the putty is easy to pollute the bedroom door and door cover, and the installation of the door will not pollute the putty on the wall.

There are many processes to be carried out in decoration, and certain principles must be followed, such as the beginning of the water and electricity transformation, and then the wall can be built and the ceiling is tiled, and different decoration processes have a sequence, so as to ensure the quality and effect of decoration. For example, when decorating, scraping putty and installing bedroom doors should choose to scrape putty first and then install bedroom doors.

First, scraping putty is easy to cause pollution to the wooden door

Now people choose the bedroom door are wooden doors, first the bedroom door is installed and then scrape the putty, it is easy to splash and fall, it will cause a certain amount of pollution to the installed bedroom door, it will be more troublesome to clean up the putty, and it is easy to cause irreparable damage to the door, which will affect its decoration effect and use feeling.

Second, the putty will contaminate the door cover

Now people's customized bedroom doors are finished doors, not only the door but also the door cover, and the door cover will be in direct contact with the wall when installing, if the bedroom door is installed first and then scrape the putty, it will cause a certain amount of pollution to the door cover in the process of scraping the putty, which will affect the visual effect of the door cover, if you want to clean up the polluted putty, it takes a lot of effort, and it is difficult to restore the door cover after cleaning.

3. Installing the bedroom door will not affect the effect of putty

After scraping putty on the wall, it will be relatively flat and will turn white, and it will not have a negative impact on the putty on the wall and the decorative effect when installing the bedroom door. Because when installing the bedroom door, the door cover will be directly put on the wall of the hole, and then the styrofoam will be used to fill and fix, even if the installation is completed after the glue is completed, and finally the door leaf will be installed again, the whole process will not cause pollution and damage to the wall, so the decoration should be scraped putty before installing the bedroom door.

After reading the above introduction, you can know that it is okay to scrape putty and install bedroom doors first when decorating, but it will be better to scrape putty first, which can ensure the quality and effect of decoration, and will not cause pollution and adverse effects on bedroom doors.

If you scrape the putty first and then install the door, in this way, the smoothness of the wall can be guaranteed. And when installing the door, it will not be affected by any factors, which will make the overall decoration effect better. Scraping putty first and then installing the door can also release formaldehyde as soon as possible, and the experience will be better when you check in.

And when scraping putty, it is necessary to move the position frequently. After being well, it will also be avoided to a large extent, and bumps will occur. But it is not absolute, if in the process of decoration, the choice is to paint the door, then you should install the door first, and then scrape putty, otherwise it will affect the effect.

Scrape putty. This way, the door sleeve and door will not be damaged. When operating, it is necessary to pay attention to the inclination of the tool, and the force should be uniform to ensure that the putty is full. During construction, it cannot be scraped back and forth many times, otherwise there will be the phenomenon of rolling skin and glue falling.

I think it should be the door first. If you scrape the putty first, it will stain the door when it is time to install it, and it will not look beautiful.

Putty should be scraped first, so as to avoid staining the door, and it will be very convenient to clean.