What kind of windows are good to install and keep warm?

The thermal insulation and sealing performance of plastic steel windows is very outstanding. The outer layer is mainly made of high-strength anti-oxidation plastic material, and the inner layer is supplemented by steel as support. Because the aluminum-plastic material does not conduct heat, and the joints of the good sealing equipment are tight, the plastic steel window has the characteristics of good sealing and heat insulation, no deformation as a whole, and the surface is not easy to age.

1. Broken bridge aluminum alloy material.

Due to the lack of broken bridge aluminum type is made of thermal insulation strips and aluminum profiles, the thermal conductivity index is only, because the installation of broken bridge aluminum windows can effectively reduce the heat conduction from outdoor to indoor, and the warmth is better.

2. Plastic steel material.

The outer layer of the plastic steel window is mainly made of high-strength anti-oxidation plastic material, supplemented by steel as the support inside, the joints are tight, and it has good sealing and heat insulation, and the plastic steel window is not deformed when used, and the surface is not easy to age.

Broken bridge aluminum and plastic steel are two more mainstream window materials, which have good warmth and can be purchased with confidence.

<> insulating glass windows provide the best warmth. Glass is the thinnest and easiest heat transfer material for doors and windows, while insulating glass uses two (or three) pieces of glass and uses a composite adhesive with high strength and high air tightness to bond the glass with an aluminum alloy frame containing desiccant inside to make high-performance insulating glass. The stubborn problem of frosting in traditional single-glazed glass in winter, insulating glass can also be easily overcome.

Insulating glass can provide up to two times the thermal insulation performance compared to a single piece of glass, which is a relief for people who rely on heating, cooling and air conditioning. It can insulate more than 70 heat in summer, and keep indoor heat not easy to lose in winter, and reduce heat loss by up to 40 percent.

Door and window glass purchase to know the following knowledge points, you can choose the right door and window glass:

Tempered glass - the safest: If tempered glass is used on both sides of the indoor and outdoor glass, the impact resistance and safety of the glass are greatly improved both indoors and outdoors. Because the impact resistance of tempered glass is 5-10 times that of ordinary glass, and its bending resistance is 3-5 times that of ordinary glass, it can be said that it is safe to arrive at home.

Insulating glass – better sound insulation and more energy efficient. Since the thermal conductivity of the sealed middle air layer is much lower than that of glass, the thermal insulation performance of insulating glass can be increased by a factor of two compared to monolithic glass, which can significantly reduce the power consumption of air-conditioned buildings. In summer, it can insulate more than 70% of the heat, and in winter, it keeps the indoor heating not easy to lose, reducing the heat loss by up to 40%, and playing the role of heat preservation, so as to turn the summer cool and winter warm into reality.

Laminated glass - high safety performance, sound insulation performance, energy saving and UV protection. In general, the intermediate layer material of architectural laminated glass is PVB interlayer, and the PVB membrane has a damping function to filter sound waves (reduce the volume transmission by reducing the vibration amplitude of the sound).

Coated glass: Coated glass is the coating of one or more layers of metal, alloy or metal compound film on the surface of the glass to change the optical properties of the glass and meet certain requirements. Coated glass can be divided into the following categories according to the different characteristics of the product:

Heat-reflective glass, low-emissivity glass (Low-E), conductive film glass, etc.

<> double-layer plastic steel windows. The doors and windows installed in residential houses are usually divided into four types: wooden doors and windows, iron doors and windows, aluminum alloy doors and windows, and plastic steel doors and windows. Plastic steel windows have good heat resistance, heat preservation and sound insulation, and are most affordable, have a long service life and are cost-effective.

However, the color matching is single, and the wind resistance needs to be improved. The aluminum alloy window has strong anti-aging ability, but poor thermal insulation ability. Broken bridge aluminum windows have good thermal insulation type, but the price is higher and the cost performance is lower.

Wooden windows are natural and environmentally friendly, thermal insulation, but their performance in moisture-proof, fireproof, safety and other aspects is poor.

Windows can be kept warm by sealing materials, sponges, curtains, double insulating glass, and thermal insulation coatings.

The method of keeping warm is as follows:

1. If there is a gap in the window, it will cause cold air to enter, so if you want to keep warm indoors, you can use sealing materials to seal the gaps in the window. If the windows in your home are old-fashioned double-walled windows, you can fill the space between the windows with sawdust, and the window cracks can also be blocked and sealed with kraft paper.

2. If the window at home is a plastic steel window with a large gap in the interface, we can use a sponge to paste it and then cover the entire window with plastic. If there is a gap between the windows, window frames and glass in the home, we can use sealing strips to seal them. The gap between the window and the wall can be filled with styrofoam.

3. If the window has been sealed, you can also choose to hang curtains to enhance the indoor insulation effect. Curtains should be made of heavy materials, such as velvet curtains, velvet bronzing curtains, chenille velvet curtains, Korean velvet curtains, etc., this type of curtain fabric is thick, windproof, and has good heat preservation.

4. You can also strengthen the indoor insulation effect by replacing the window glass. For example, if the window glass at home is single-layer glass, it can be removed and replaced with double-layer insulating glass, which has a good thermal insulation effect, superior sound insulation performance and stronger impact resistance.

5. Most floor-to-ceiling windows will be covered with a layer of thermal insulation film on the window, or use thermal insulation coating, which can effectively absorb the heat of the sun, thereby avoiding the cooling of the glass after being subjected to severe cold.

Insulating glass.

Warmth Index:

Glass is the thinnest and easiest material to transfer heat in doors and windows, and insulating glass is a high-performance sound and heat insulation glass made of two (or three) pieces of glass, using a high-strength and high-airtightness composite binder, and bonding the glass sheet with an aluminum alloy frame containing desiccant.

The stubborn problem of traditional single-layer glass frosting in winter can be easily overcome by insulating glass. Compared to monolithic glass, insulating glass can be insulated by up to two times, which is a relief for people who rely on heating and cooling to get by. In summer, it can insulate more than 70% of the heat, and in winter, the indoor heating is not easy to lose, reducing heat loss by up to 40%.